subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 505)
Builder: KOMPTECH Model: TOPTURN X67 Year: 2011 Operative Hours: 2.700 h Country: ITALY ... más información
Conveyor belt Hazemag Brand: Hazemag Type: HAZ HAZ1= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. HAZ2= A.A length: 23,000 mm, belt width: 1000 mm, drive: 18 kW. HAZ3= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. HAZ4= A.A length: 18,500 mm, belt width: 800 mm, drive: 5.5 kW. HAZ5= A.A length: 14,500 mm, belt width: 1000 mm, drive: 11 kW. HAZ6= A.A length: 15,000 mm, belt width: 800 mm, drive: 7.5 kW.
Separator built on a stainless steel skid, with supply pump, discharge pump, sludge pump, circulating tank, stainless steel lines and valve, wired with switch box. For cleaning polluted water. Large water phase, small light phase and dirt phase. No! Emptying machine ! Must be opened for cleaning. Time: approx. 5 min. Ready for use. For more questions, please email.
The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with ...
Nestro rotary valve, built in 2006, for the separation / differentiation of paper chips or paper edge sections Specifications: Manufacturer: Nestro Lufttechnik GmbH Type: 37 21 12 Year of construction: 2006 Motor: 2.2 kW Max. flow rate: 12000 m³/h Max. inlet diameter: 450 mm Speed: 25 rpm. Dimensions: 2050 x 1260 x 1550 mm (LxWxH) Weight: approx. 1200 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
As good as new plant for sale Air sifting for substitute fuel, mixed construction waste, bulky waste, household waste Facility can be visited by appointment! Few operating hours Subject to prior sale! ... más información
Chamber filter presses complete with lime silo and preliminary negotiation with discharge conveyor belt The plant is still in operation! Sale from location with operating instructions! The dismantling can be organized and is not included in the purchase price! ... más información
Brand new compost turner For tractor with rear driving device From 200 hp For flexible composting with optimisation of space logistics! Promptly available Subject to prior sale! ... más información
6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW ... más información
- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)
Capacity: 15 cbm with dosing belt new control box Steel skid frame with approach plate ... más información
Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction ... más información
Work surface: 1,400 x 5,000 mm, stainless steel lining, drive 2 x 2.2 kW ... más información
Stiletto feed channel Brand: Stiletto Dim: length 1900 mm - width 700 mm, Drive with magnet vibrator Incl.: Rule apparatus. ... más información
UHDE feed channel 2 types in stock : Length 1700 mm - Width 430 mm Length 1200 mm - Width 430 mm Drive by means of magnet vibrator Incl.: Rule apparatus. ... más información
Wacker feed channel Length 1500 mm - Width 550/600 mm with two vibration motors of 0.5 kW each ... más información
Stationary crane with pulverizer Brand pulverizer: KRUPP Electric water propulsion ... más información
Feeding chute Jöst Brand: Jöst Dim: Length 1500 mm - Width 800 mm Propulsion: two vibration motors of 1.2 kW each. In stock: 2 pcs. ... más información