otras máquinas para la eliminación de residuos y reciclaje usadas para la venta

Used roll packer Manufacturer: Bergmann Type: RP 7801-69 Year of manufacture: unknown specifications: Weight: 3,100 kg Power: 5.5 kW, 12.5 A Pmax.: 220 bar Noise level: 69 dB(A) The hydraulic motor has recently been renewed. Technical description: The rolling roller for compaction of waste and garbage is an invention from BERGMANN. For 30 years, this technology has been in continuous use worldwide – at recycling centres, in wholesale markets, industrial plants and elsewhere. Clean, highly efficient and extremely low-maintenance! The principle is simple: a heavy-duty compaction roller with hydraulic self-propulsion is guided over an articulated mast in the container and captures, tears and compacts the Einfüllgut.Im dialogue with its customers, BERGMANN has repeatedly expanded its machine family of roll packers: from roll packers, which have its fixed  ...

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

used scrap shears / Aligator scissors Manufacturer: Schlüter Maschinenfabrik Type: MGA 6 Year of construction: 1974 specifications: Cutting performance at 37 kg/mm²: Round iron: up to 18 mm Square liners: up to 15 mm Flat iron: up to 60 x 8 mm Sheet: up to 7 mm  ... más información

used lift-tilt device Manufacturer: L&M Type: HKV Year of construction: 2016 Net weight: 800 kg Total weight: 1,600 kg with transport castors  ... más información

used residual roller saw Manufacturer: PAAL Type: RS 40 / 250 specifications: roll diameter: 400 mm roll length: 2,500 mm Saw blade diameter: 600 mm Drive power: 22 kW transport chain speed: 2.45 to 11.75 m/min. Throughput depending on roll length and saw cutting depth: 87.5 to 175 m/h housing width approx.: 1000 mm machine length approx.: 9000 mm Machine weight: approx. 2,400 kg

used conveyor belt Manufacturer: AVERMANN Type: Chain conveyor belt Year of construction: submitted technical data: Conveyor width: 1,800 mm Axle distance: approx. 10,000 mm Installation according to photos. Subject to errors in the technical data!  ... más información

used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

Used screw compressor / screw press Manufacturer: H&G Type: DWF V11 Year of construction: 04.00 Specifications: Weight: approx. 1,800 kg Speed: 10 1/min. Operating voltage: 3/N/PE AC 400 V Frequency: 50 Hz Rated current: 22.5 A  ... más información

used chain conveyor belt Manufacturer: PAAL Type: KES 1750 Year of construction: 1993 specifications: Conveying width: 1,750 mm Feed length: 18,370 mm Riser length: 13,440 mm Drive power: 9.2 kW 2-speed speed Side bolster heights: 527 / 1027 mm  ... más información

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW  ... más información

Dosing hoppers Manufacturer: HECKERT Type: Dosing bunker specifications: Sliding floor length: approx. 8,500 mm Sliding floor width: approx. 2,700 mm Sliding floor height: approx. 2,360 mm Side wall height: approx. 2,000 mm Capacity: approx. 40 m³ Drive power: to follow!  ... más información

used optical sorting device Manufacturer: TiTech Type: PolySort 1400 Serial-No.: X148T, A551004-00  ... más información

Several used TiTech Autosort and Polysort 700 1.000 and 1400 devices available  ... más información

used optical sorting device Manufacturer: TiTech Type: PolySort 1000 Serial No.: X092M, A551003-00  ... más información

used paper sorting system composed of: Feed belt with high side walls, standing on the floor Climbing belt as steep chain conveyor Cross band as webbing to the screening machine Screening machine Trigger tape 1 as webbing for large cardboard Trigger belt 2 as chain belt to sorting belt 1 Trigger belt 3 as belt conveyor Sorting belt 1 Sorting platform 1 with 4 boxes of approx. 3 m width each with stairs and emergency ladder Sorting cabin1 with heating and ventilation system Paper Spike 1600 Sorting belt 2 Sorting platform 2 with 3 boxes of approx. 3 m width each with stairs, flanged to sorting platform 1 Sorting cabin 2 with heating and ventilation system

used webbing conveyor belt Manufacturer: SUTCO Type: RGF GB 1400 Year of construction: 2016 Specifications: Conveying width: approx. 1,400 mm Centre distance: approx. 9,620 mm Path length: approx. 5,061 mm Gooseneck: yes Drive power: 2.2 kW  ... más información

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

Conveyor belt Svedala Brand: Svedala Sv8: A.A length = 7,800 mm, belt width: 1500 mm Propulsion: Hydraulic motor Sv9: A.A length = 7,600 mm, belt width: 1000 mm Propulsion: 3 kW drum motor  ... más información

Conveyor belt Svedala Brand: Svedala Sv5: A.A length = 6,000 mm, belt width: 650 mm Propulsion: Hydraulic motor Sv6: A.A length = 7,000 mm, belt width: 650 mm Drive: 4 kW slip-on gearbox Sv7: A.A length = 6,000 mm, belt width: 800 mm Drive: 4 kW slip-on gearbox  ... más información

Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one  ... más información