máquinas para productos farmacéuticos y cosméticos usadas para la venta

1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

1 piece NAUTA mixer MBX 20-R -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

specifications: Up to 400 PCS/MIN, 8 sealing heads, continuous rotary sealer. Vial diameter (mm) DF: Min 14, Max 52. Vials height (mm) HF: Min 35, Max 110. Cap diameter (mm) DC: Min 13, Max 33. Cap height (mm) HC: Min. 6, Max. 16. Power: up to 400 rpm. Standard voltage: 400V - 50 Hz.  ... más información

BOSCH Type KLD 1041 Leak Test Machine for Ampoules and Vials Leak test machine for glass containers. Linear automatic machine for the inspection of ampoules, injection cylinders/cartridges and injection bottles/vials, which checks each container at four inspection points by means of high-voltage technology. The testing principle is based on the detection of the changing impedance of a container filled with an electrically conducting liquid. The containers are examined for: hairline fissures and pinholes ; insufficient glass wall thickness/tip domes too thin ; capillary pores ; leaking fusion points, sealing points and ampoule neck tips ; absence of fill. MAIN FEATURES: It is recommended to carry out the container leaktightness test directly after sterilization or fusing. The unit is equipped with: conveyor system, infeed belt, 4 high-voltage inspection stations (1-2 check bodies and ...

Servo-driven side loading case packer, designed to operate in continuous cycle, collate products in the specific quantity and case pattern, introduce them inside the case, which was previously withdrawn from the case storage and squared and close it with Hot Melt or self-adhesive tape.  ... más información

TABLET PRESS MANESTY BETAPRESS N° of stations: 16 Operating pressure: Max. 6.1/2 Diameter of punches: 19 mm Length of upper punch: 133.6 mm Length of lower punch: 133.6 mm Max. mechanical speed: 90.000 Height of machine: 160 mm Floor space occupied: 584 mm x 851 mm Approx. weight of machine: 695 Kilos

Bausch Stroebel KS 1010 machine for injection vials Bausch Stroebel brand for injection vials from approx. 3. f00 vials/h, fully automatic, consisting of: Brand: Bausch Stroebel Model: KS 1010 Stainless steel crimper version for 16-45 mm vials, height 25-80 mm, speed according to product max. 3,500 vials/h. Includes 1 metal lid vibrator, staple station. The team is provided with its anti-cancer protections, monitoring the presence of the lid and its alarms.

Automatic action Checkweigher OCS model EC Year of construction: 2003 Weighing cell: 3000 Control measurement: up to 1,500 g Temperature: from + 5 °C up to 40 °C Power: 115/230 V/50 Hz Scale range e = 0.2/0.5/1.0 g Scale range d = 0.1/0.2/0.5 g Including PCE YEAR 2010 Datamatrix station: Power: 230 V - 50 Hz Air supply: 6 - 8 bar.

Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3

Giusti preparator 75 litres Year of manufacture: 1996 Capacity: 75 litres INNER BAR: Max. PR: ATMOS Min. PR: ATMOS Test pression: water fill Working pression: ATMOS Design temperature: 150 °C JACKET BAR: Max. PR: 3.3 Min. PR: ATMOS Test pression: 5.0 Working pression: 3.0 Design temperature: 150 °C

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

Bosch MLF 3002 intermittent motion filling and closing machine for injectable vials. Includes rotaty table for empty vials, 4 rotary piston filling heads (currently filling 100ml), stoppering inserter with bowl feeder, and closing system for ALU caps with bowl feeder. 90 degree reject to the rear of the machine, and product discharge in line with product flow. Suitable for containers up to 55mm diameter and up to 185mm high (double index), inserts and caps up to 36mm diameter. Output approximately 6,000 containers per hour.

Empty-tray (part of a line)  ... más información

Specific Details Industry:pharmaceutical, cosmetics, nutraceutical, food, others Number of cartons:70 /min Length of carton (min):60 mm Length of carton (max):210 mm Width of the carton (min):20 mm Width of the carton (max):125 mm Height of the carton (min):15 mm Height of the carton (max):80 mm Motion:intermittent Leaflet device:Yes

bundle sizes from 30 x 12 x 50mm up to 350 x 200 x 200mm (minimum individual carton size 15 x 12 x 50mm), output up to 50 bundles per minute. Includes infeed and outfeed conveyors.  ... más información

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...