La indicación de distancia no es posible porque no se pudo determinar su ubicación. El requisito previo es que su navegador permita las cookies y la determinación de la ubicación.

 

Fabricante:
(Categoría: 836)

ABA 1
AEG 1
AG 1
AKM 1
AMC 1
AVC 1
BDT 1
CB 1
CMC 4
FKS 1
GBC 3
GMP 1
HANG 41
HHS 2
IML 1
JBI 1
KMK 4
LGS 1
LM 1
OMG 1
OMM 1
PFE 2
PGF 1
SKM 1
TMF 1
WSK 1
postimpresión: otras
Máquina: MULLER MARTINI JU 1 马鞍缝合机
Número de artículo: 162364229
Año de construcción: 1982
usado
Precio: 2.500 €

-Year 1982 -Three hand fed stations -Max paper size 32x44 cms. -Two stitching heads -Three knife trimmer model DS1 -Standard delivery -Many set of spare knives -All accessoires  ... más información

postimpresión: otras
Máquina: DUPLO DC-645 分切机-切割机-折痕
Número de artículo: 158220326
Año de construcción: 2013
usado

Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned  ... más información

postimpresión: otras
Máquina: RACHNER RD 800 P 翻桩机
Número de artículo: 161014276
Año de construcción: 2011
usado

pile turner Rachner RD 800 P; condition outdated; Format 600x900; Load capacity 800kg; new tilting cylinder; upper cylinder overhauled; pump and tank cleaned; new tilt valve. Pile turner Rachner RD 800 P; condition rebuilt; size 600x900mm; lifting capacity 800kg; new turning cylinder; upper cylinder rebuilt; pump and tank cleaned; new turning valve.

postimpresión: otras
Máquina: HANG 103 LOK 大马辛
Número de artículo: 121607252
usado

Oesmaschine Hang 103 LOK; good condition; cleaned and checked; suitable for Oese 4mm (24er).; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

postimpresión: otras
Máquina: FOELLMER ME 45/ EX 螺母穿孔机
Número de artículo: 106604067
Año de construcción: 1984
usado

Foellmer ME 45/EX; good condition; Working width 450mm; short and long investment table; Tool for groove and perforate; Foot switch; Zaehler.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

postimpresión: otras / 纸钻机
Máquina: HANG 107-20 纸钻机
Número de artículo: 163534335
usado

Paper drill Hang 107-20, machine number 92776, 4 spindle, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.  ... más información

postimpresión: otras / 纸钻机
Máquina: HANG 106DTK4 纸钻机
Número de artículo: 159912386
usado

Paper drilling machine Hang 106DTK4, machine number 62407, in good condition, immediately available  ... más información

postimpresión: otras
Máquina: BAUMANN BSB 3/L Rütteltisch Rüttler
Número de artículo: 131340477
Año de construcción: 1988
usado

Paper Shaker with scraping roller Baumann BSB 3/L, built 1988, serial number 210277, in good condition, available immediately  ... más información

postimpresión: otras / 深加工机器
Máquina: LEOMAT C330 SFR 深加工机器
Número de artículo: 159670224
Año de construcción: 2012
usado

2x Leomat C330 SFR, 2012 finishing machine manufactured for blank adhesive labels or printed rolls Servo engine Web width 100 – 330 mm Material thickness 25 – 450 μm Max speed 150 m/min Corona Flexo printing unit from Gallus UV system from GEW e-brick The cutting Matrix winding lamination Crush cut knives Automatic stop when the number of pieces is reached, the end of the roll, the waste flag or a web break. inspection system DST Tubescan Digital StrobeV register control Label counter

postimpresión: otras
Máquina: CMC ITALIA LPA 50-70 手动制壳机
Número de artículo: 8888115
Año de construcción: 2004
usado
Precio: 14.500 €

manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort

postimpresión: otras
Máquina: CMC ITALIA Q-cover-1  50-110 手动制壳机
Número de artículo: 64893
Año de construcción: 2010
usado
Precio: 14.950 €

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table  ... más información

postimpresión: otras
Máquina: SUMBEL Perkeo 60 封边机
Número de artículo: 162335499
usado

edge banding machine Sumbel Perkeo 60; good condition; cleaned and tested; Working width 60mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 60; good condition; cleaned and checked; working width 60mm; one roller; used for cold glue  ... más información

postimpresión: otras / 捆扎机
Máquina: TANNER JD240 / 30 CE96 捆扎机
Número de artículo: 162589184
Año de construcción: 2000
usado

M. No.: 4810-H-968 Equipment / Additional information: Volt: 230 // Hz: 50 // A: 1  ... más información

postimpresión: otras
Máquina: KNORR ABS-110-2-L6L 卸料器
Número de artículo: 162548046
Año de construcción: 2001
usado

M. No.: 7160013  ... más información

postimpresión: otras / 封面设计师
Máquina: STENZ FEEDER  封面设计师
Número de artículo: 162749538
usado

M. No.: 409091063 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed sys ...

postimpresión: otras / 包装机
Máquina: PACTUR LADY PACK 45/SL2 包装机
Número de artículo: 162749543
Año de construcción: 1997
usado

M. No.: 12091 Equipment / Additional information: DESCRIPTION: The sealers Pactur thanks to their production concepts, can be easily transported. The electronical control grants good performances and user friendly functioning. Although they have a limited foot print, are equipped with a real shrink tunnel, which grants high packaging perfomances and excellent results. The machine has two conveyor belt movement cycles, choiceable from the control panel: forward-forward and forward-reverse. Forward-Forward, with product outflow from the side opposite the load, for greater productivity. Forward-Backward, with product return to the operator, for fragile products or logistical needs. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Semi-automatic sealer with shrinking tunnel Pactur type Lady Pack 45/SL 2 includ ...

postimpresión: otras
Máquina: RATIONELLA MASKINER IRAM 16 四轴钻床
Número de artículo: 162496935
Año de construcción: 1986
usado

M. No.: 1767  ... más información

postimpresión: otras
Máquina: HANG 136 D 双主轴钻床
Número de artículo: 162496938
usado

Sr. No.: 70218 Equipment / Additional information: Various tools  ... más información

postimpresión: otras
Máquina: W. KROLL  电动打孔机
Número de artículo: 161014272
usado

Condition: Very good condition  ... más información

postimpresión: otras
Máquina: W. BENTELI  冲床
Número de artículo: 161007429
usado

Condition: Very good condition  ... más información