▷ outras máquinas para trabalhar o metal usava máquinas para trabalhar metal no RESALE.INFO

x-travel: 6000 mmy-travel: 1800 mmworkpiece height: 1800 mmControl: total power requirement: 55 kWweight of the machine ca.: 52 tdimensions of the machine ca.: 14,3 x 4,6 x 4,7 mWaldrich CoburgDouble column planer with hydraulic, infinitely adjustable driveModel TYPE 8 D 4036Year of construction 1967Length 13900mmPlaning width 2000 mmTable clamping surfaceLength 6000mmWidth 1800mmHeight 1800mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

outras máquinas para trabalhar o metal / 熔炉

data: 07.05.2024 adicionar à lista de observados

Número do item: 164001495
Ano de construção: 1967
usava

NASSHEUER RO DR 3000 620 KW

Annealing Furnace

CHARACTERISTICS HEAT TREATMENT EQUIPMENT heating method: electric temperature min.: 420 °C temperature max.: 930 °C throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included

outras máquinas para trabalhar o metal / 拉床

data: 05.02.2024 adicionar à lista de observados

Número do item: 144523932
Ano de construção: 1967
usava

RAUSCH RS 3/800

Broaching Machines

used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 3000 KG Clearance speed: 3m/min Return speed: 3m/min maximum stroke: 800mm Ropcmo87 maximum tool length: 1000mm Table area: 350mm x 220mm Table break-in: 90mm Workpiece diameter: any Dimensions (h x w x t): 1260 x 500 x 720mm Engine power: 1.1 / 1.5KW Power supply: 380 volts 50 HZ Accessories / Optional equipment: - integrated coolant / cutting agent system - Machine documentation Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has been partially overhauled, all bearings, shaft seals and seals of the trapezoidal spindles and gearbox have been renewed. The drawing head is re-ground and adjusted, the machine body is ...

outras máquinas para trabalhar o metal / 熔炉

data: 19.12.2023 adicionar à lista de observados

Número do item: 161700373
Ano de construção: 1967
usava

HERAEUS TUo

熔炉

Preço: 2.340 €

Manufacturer: Heraeus Type: TUo Year of construction: 1967 Power: 5.5 kW Temperature: 250 °C Dimensions: 600 x 600 x 550 mm ... mais informação

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 163732027
Ano de construção: 1967
usava

DEMAG A5

桥式起重机 - 双梁

clamping width: 5000 mmlifting capacity: 5 tweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 160453701
Ano de construção: 1967
usava

PELS - RICHTER PEKR 125

单柱偏心压力机

Preço: 12.000 €

Single Stand - Eccentric Press PELS - RICHTER Type PEKR 125 Masch. No. 20684 Year of construction 1967Compressive force 125ton. Projection 430 mm Table size 1100 x 750 mm Ram surface 890 x 650 mm Table opening 400 mm Stroke adjustment 6 to 115 mm Ram adjustment 100 mm Installation height largest stroke above max. 450 mm Clamping pin bore 50 mmStroke rate 60 strokes/min. Table height above corridor 900 mm Motor power 7.5 kWMains connection 380 volts, 50 Hz- Overload protection by crushing plate in the plunger- Compressed air Clutch-brake combination DESCH- Plunge weight compensation cylinder- Manual ram position- Two-hand operation- Cam switchgear- Grease central lubrication Vögele- Stroke counterSpace requirement L x W x H 2300 x 1450 x 3030 mmWeight approx. 10 ton. good condition; used

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 156966154
Ano de construção: 1967
usava

SCHARMANN FB 80

台式钻孔装置

spindle diameter: 80 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 815 mmSpindle travel: 450 mmspindle taper ISO: 40 Radial face slide diameter: 498 mmtable surface area: 1000x800 mmdigital readout: coolant: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 161646274
Ano de construção: 1967
usava

KUMAG

滚铆机-径向点铆接机

Preço: 1.400 €

Tumbling riveting machine - radial spot riveting machine KUMAGMasch. No. 67/101 Year of construction 1967Table size 330 x 280 mm Projection 215 mm Tool shank cone 8 - 10 mmRivet shank diameter 1 - 10 mm Tool stroke 30 - 40 mmOperating air pressure 1 - 6 barRivet time adjustable 0.5 sec. - 3 h motor power 0.8 kWMains connection 380 volts, 50 Hz- Conical tool shank for quick tool change- Rivet head on the column adjustable in height- Fine adjustment of the working stroke, max. 10 mm, with scale ring- Riveting force air pressure infinitely adjustable- Triggering via push-button table modelSpace requirement L x W x H 670 x 450 x 850 mmWeight 215 kggood condition; used

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 160453731
Ano de construção: 1967
usava

DECKEL FP 1

大学工具铣床

Preço: 7.800 €

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 51265/08 Year of construction approx. 1967Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 stepsMotor power 1.0 and 1.6kW pole switchableMains connection 380 volts, 50 Hz feed in the X and Z axes- Spindle speed over 2motor speeds and 8 gear stages - Pinole shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinetSpace requirement L x W x H 1100 x 1100 x 1600 mmWeight 650 kggood condition; used

outras máquinas para trabalhar o metal

data: 24.04.2024 adicionar à lista de observados

Número do item: 161700444
Ano de construção: 1968
usava

NEDSCHROEF HPT2

螺栓制造商 4 模 4 吹

diameter range 8 mmnumber of dies 4number of stations (incl. cut off) 7cutting length 20-105 mmshaft length under head 85 mmoutput - pieces/min 120max. thread length 70 mmmax. width across flats 14 mm ... mais informação

outras máquinas para trabalhar o metal

data: 24.04.2024 adicionar à lista de observados

Número do item: 161700997
Ano de construção: 1968
usava

NEDSCHROEF HPT6

螺栓制造商 4 模 4 吹

bushing cut-offdiameter range 10-22 mmnumber of dies 4number of stations (incl. cut off) 7cutting length 200 mmshaft length under head 160 mmoutput - pieces/min 60max. thread length 95 mmmax. width acros flats 32 mm ... mais informação

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 163395548
Ano de construção: 1968
usava

KURT EHEMANN V K8

圆盘磨床，主轴磨床，运行

Preço: 3.400 €

... mais informação

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 164002400
Ano de construção: 1968
usava

W. BREITENBACH Standard 4-III/8 (7Z)

Fine Wire Multi-Drawing Machine

Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained.

outras máquinas para trabalhar o metal

data: 24.04.2024 adicionar à lista de observados

Número do item: 163253215
Ano de construção: 1968
usava

WAFIOS SF21

六角丝网机

wire diameter 0,6-1,1 mmmesh width 3/4 inchworking width 2100 mmnumber of strokes 115-125 ... mais informação

outras máquinas para trabalhar o metal

data: 24.04.2024 adicionar à lista de observados

Número do item: 163206701
Ano de construção: 1968
usava

HATEBUR ORIGINAL AMP30

热螺母成型机

diameter range 64 mmmax. width across flats 56 mmmax. outside dia. of round pieces 64 mmbar dia. 18-40 mmcutting length 20-72 mmoutput - pieces/min 140number of forming stations 3press power 230 t ... mais informação

outras máquinas para trabalhar o metal

data: 24.04.2024 adicionar à lista de observados

Número do item: 162241910
Ano de construção: 1968
usava

HILGELAND PN1

定点机

diameter range 2-6 mmshaft length under head 5-50 mmoutput pieces/min 180 ... mais informação

outras máquinas para trabalhar o metal

data: 02.05.2024 adicionar à lista de observados

Número do item: 122345604
Ano de construção: 1968
usava

WAFIOS KGA 4

环锁围栏机

working width: 2.000 mmnumber of line wires: max. 16distance of cross wires: 6\", 12\", 18\", 24\" od. 36\"distance of length wires: 1/2\" to 1/2\"wire diam. length wire: 2,5 - 3,25 mmwire diam. edge wire: max. 4,0 mmwire diam. cross wire: max. 3,25 mmwire diam. knot wire: max. 3,25 mm; ready for operation

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 160453608
Ano de construção: 1968
usava

SCHNEIDER Senator 155

橡胶、纸张和单板剪（平面图）

Preço: 3.800 €

Pile cutting machine, stack cutter, face cutter SCHNEIDER type Senator 155 Rubber, paper and veneer shears Masch. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125mm Application height 140 mm Backgauge max. 1550 mmMotor power Knife drive 5.5 kWMainsconnection 380 volts, 50 Hz- 2-hand operation for stroke triggering - automatic pressing by hold-down presses the stack of paper onto the table - Kickback (backgauge) with digital dimension selection and sequence cut adjustment via control- Backgauge adjustment via servo motor (motor and control has been retrofitted)Space requirement L x W x H 300 x 270 x 165 cmWeight 5100 kggood conditionIdeal for cutting paper, cardboard, leather, cork, rubber or fabric reinforced rubber; used

outras máquinas para trabalhar o metal / 花键槽拉丝机

data: 21.02.2024 adicionar à lista de observados

Número do item: 163408074
Ano de construção: 1968
usava

FRÖMAG KZH 100 / 425

花键槽拉丝机

Weight approx. 800 kg Dimensions set-up approx. (LxWxH) 1200x900x1600 mm ... mais informação

outras máquinas para trabalhar o metal

data: 07.05.2024 adicionar à lista de observados

Número do item: 163837171
Ano de construção: 1968
usava

TOS WH 63

台式镗铣床

spindle diameter: 63 mmtaper MK: 5 facing slide: ja digital: ja : ja weight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação