prensas usadas para venda

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

SC ECOPELET-BRICHET SRL sells the industrial pellet press, with the following characteristics: - year of production 2023; - motor 37 kw in 8 poles; - electric panel; - with ring mold; - capacity 1000 kg/hour softwood pellets, 700 kg/hour mixed pellets (50% beech, 50% fir); - pellets with a diameter of 6 mm. The machine produces wood pellets which is a biomass fuel used by the customers who use pellet heat

table size: 3000mm x 1500mm; Emergency stop switch: no; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;  ... mais informação

table size: 3000mm x 1500mm; Emergency stop switch: no; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;  ... mais informação

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

Four-level gluing press Altec MVP 6/16 for pneumatically gluing solid wood workpieces in 8 positions including steel press attachments., workpiece length: max. approx. 2,500 mm, Workpiece width: max. approx. 800 mm, workpiece height: max. approx. 70 mm ... mais informação

Plate dimensions: 1550 x 850 mmDaylight opening: 350 mmNumber of daylights: 1 St.Heating: ja Total pressure: 60 toMotor output: kWDimensions (L/W/H): 2,3 x 0,85 x 1,73 mmweight of the machine ca.: 2,5 tElectric 380 Volt: Hydraulic veneer- or board press with printing capacity of 80 t, shutdown when the final pressure output is reached and heating in the lower/upper plate.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Device for the final assembly of grave crosses., Weight: 250 kg, connection: pneumatic, 6 bar ... mais informação

Glue star or rotating gluing press Hess Rotor for gluing wood to form panels with 8 pressing surfaces (1,250 mm each). Incl. glue application machine and lots of inlay wood with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4

Obel Pedersen type T30L high-frequency press for quickly gluing wood using high-frequency technology. The glue will The moisture is quickly removed and thus ensures a short pressing time. Including automatic Loading unit and scissor lift table in the outlet., glue: Dispersion glue (white glue), phenol resocin glue, urea glue and melamine glue, pressure: 42 tonnes, Included: new band, Further technical data: On demand

Hydraulic frame press Polzer HKR 35/250., Working width: 4,000 mm, working height: 2,500 mm. ... mais informação

Order No. 6761 TECHNICAL DATA 6 hydraulic cylinders: - 4 upper - 2 side - max. length of glued elements 3100mm - max height of glued elements 1600mm - pump motor power 1.5kW - dimensions length / width / height 4320x1500x1120mm - weight kg ADVANTAGES - unpainted - possibility of gluing in vertical and horizontal position - used press - very good condition PRODUCT FEATURES The press is designed for assembly of all rectangular frame structures, e.g. doors, windows of various dimensions. An additional hydraulic cylinder is responsible for the possibility of gluing in the vertical and horizontal position. Net price: PLN 18 900 Net price: EUR 4021 Net price, calculated at the rate of 4.70 PLN / EUR (with greater fluctuations in the rate, the price may change)

Catalog No. 6832 TECHNICAL DATA piston cylinders 5 pcs: - 3 vertical - 2 horizontal - max length of glued elements 3630mm - max width of glued elements 2270mm - engine power 0.75 kW - hydraulic piston cylinders - dimensions length/width/height 4450x880x2880mm - weight about 1000 kg ADVANTAGES – German production – unpainted - a hydraulic press – used press, very good condition Net price: PLN 13900 Net price: EUR 2989 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm  ... mais informação

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.  ... mais informação

Corpus press (used) Press for assembly of hulls (b/u) Good quality In good condition Pressurized area of the 800x570 mm Pneumatic cylinders: Number of pneumatic cylinders: 4 Step between stating hole: Distance between fixing holes: 50 mm Compressed air pressure Compressed Air 8 bar Transport dimensions Transport Sizes 1950x600x1150mm Weigh Weight 350Kg

- Brikettdurchmesser 70 mm- Hydraulik Motor 7,5 Kw- Stundenleistung 50/120 kg/h- Luft-Öl-Kühlsystem- 7 Zyklen/min.- Brikettlänge max. 50 mm- Doppeltes Manometer- Ölstandssensor im Behälter und Temperatursensor- Schaltschrank mit SIEMENS SPS-Steuerung Touch screen- Betriebsstundenzähler- Schneckenkanal, Schneckenaustragung - Materialtrichter 1900 mm x 1600 mm- Spannung 400 V/50 Hz- Abmessungen L=1850, B=1500, H=1230 mm- Gewicht 870 kg

- Brikettdurchmesser 80 mm- Hydraulik Motor 11,0 Kw- Stundenleistung 90/210 kg/h- Luft-Öl-Kühlsystem- 7 Zyklen/min.- Brikettlänge max. 50 mm- Doppeltes Manometer- Ölstandssensor im Behälter und Temperatursensor- Schaltschrank mit SIEMENS SPS-Steuerung Touch screen- Betriebsstundenzähler- Schneckenkanal, Schneckenaustragung- Materialtrichter 1900 mm x 1600 mm- Ölkühler HYPERCHILL- Spannung 400 V/50 Hz- Abmessungen L=2000, B=1600, H=1230 mm- Gewicht 1550 kg