prensas usadas para venda

- Brikettdurchmesser 50 mm- Durchsatzleistung 30-50 kg pro Stunde , Materialabhängig- Schaltschrank mir SIEMENS SPS-Steuerung- Motor Hydraulikpumpe 5,5 kW- Hydraulikölmenge 80 Liter- Spannung 400 V/ 50 Hz- Behältergrösse 1040 x 1040 mm- Abmessungen L=2030, B=1270, H=1345- Gewicht 900 kg ... mais informação

- Brikettdurchmesser 50 mm- Durchsatzleistung 60-90 kg pro Stunde , Materialabhängig- Schaltschrank mir SIEMENS SPS-Steuerung- Motor Hydraulikpumpe 7,5 kW- Hydraulikölmenge 100 Liter- Spannung 400 V/ 50 Hz- Behältergrösse 1040 x 1040 mm- Abmessungen L=2030, B=1270, H=1345- Gewicht 1000 kg ... mais informação

Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than:  ...

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850  ... mais informação

Briquetting press Comafer Dinamic mini 30 Briquette diameter 45mm Motor power: 3kw Machine available on backorder  ... mais informação

For sale second hand briquett press made by DIPIU. Completely renewed with overhauiln. Model MB 70. Price: 69.000 EUR EXW  ... mais informação

-Exhibition machine----------- Technical data ----------Briquette : 60 mm, hydraulic power unit 3 kW: 140 bar, voltage: 400 V, frequency: 50 Hz, fuse: 16 A, power approx.: 20-35 kg/h, weight approx.: 300 kg- Simplest handling- Hydraulic control- Briquette diameter 60 mm- Briquette length adjustable as desired (max. 60 mm)- Motor equipped with motor protection switch and emergency stop- No electronic components such as controllers, sensors and sensors or complicated controls- Large storage container- Briquette tongs tempered- Press rod replaceable- Presses without the addition of additives- Thanks to the pre-compressor, even voluminous chips can be processed- No adjustment work or monitoring of the pressure necessarynew exhibition machine

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, ma ...

5.5 kW 60 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English 31.1.1  ... mais informação

Code: 0229 Brand: POR Model: A 100N - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard With covered suction filtering battery ASPIR MECC AM B/64 CS - CE Standard Technical data Briquette diameter mm 65 Max briquette length mm 50/300 Output m3/h 1,454 Motor Hp 10 Drum diameter mm 1200 Pump lt 50 Level sensor Inspection door Cooling unit Overall dimensions mm 2115 x 1350 x 1700 h Weight kg 1000 Covered suction filtering battery SPIR MECC AM B/64 CS - CE Standard - with 64 filtering tubes Flow rate m3/h 8500 Power Kw 0,18 Round attach with connecting flange Overall dimensions mm 2100 x 2100 x 2800 h Weight kg 650

Catalog No. 6853 TECHNICAL DATA - hydraulic clamping force - round briquette form - briquette diameter 65mm - dimensions of the tank height / width 770x940mm - sensor of the minimum level of trout in the hopper - automatic or manual operation of the machine - inspection window in the machine chute - pump motor 7.5 kW - agitator motor 0.35 kW - 2 types of screw speed 1100, 1700 rpm - screw motor 0.75 kW - dimensions length/width/height 2050x1650x1640mm - weight 895 kg ADVANTAGES – unpainted – German production – used briquetting machine - very good condition Net price: PLN 31900 Net price: 6860 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The ma ...

Blum Drawerpress ZZM 6300 Boxpress year approx. 2000 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Bfxt92krpx Thickness of bottom min.13mm, max. 16 mm Dimensions of machine LxBxH approx. 2000x1200x2000mm Weight 450 kg  ... mais informação

21-26- Three-part mechanical press (used) In good condition Workbench area 2450x1000 mm Number of pressed parts: 3 The area of the pressed part is 800x1000 mm Maximum working height 500 mm Transport dimensions 2700x1000x1800 mm Weight 1055 kg Price 1100 Eur (EXW Jonava, Lithuania)  ... mais informação

Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide

- Pressfläche 3000 x 1600 mm - stabile Stahl-Heizplatten 42 mm mit Thermo-Ölheizung - Gesamtpressdruck 200 t (4,2 kg/cm2) - 8 Hydraulikzylinder 120 mm - 2 kurze Hydraulikzylinder FI 80 mm - Schließgeschwindigkeit 20 - 60 mm/sec. - Öldruck 20 Mpa - Vorschubgeschwindigkeit 15 m/min - Heizplattenleistung 45 kW - max. Temperatur der Heizplatten 120 CC - Gesamtanschluss 10 kW - Abmessungen L=5500, B=4000,H=2250 mm - Gewicht ca. 8000 kg

STEGHERR 2, 5 m Edge press 2, 5 m length on one side from the bottom with edge - preheating rail Driving device Space requirement approx. L = 2900 B = 600 H = 900mm G &-2789  ... mais informação

Edge press with preheating device, hydraulics, clamping length 2500 mm, mobile.  ... mais informação

Gebr. Edging Press pneumatic 6 pressing units Swivel Chassis incl. heating rail ELKOM: gold anodized Length: 310 cm 220V / 1,500 W up to 100°C  ... mais informação

- automatic loading via conveyor belt- max. press length 2500 mm- max. workpiece width 100 mm- max. workpiece height 80 mm- max. working pressure 7500 kg- motor hydraulic pump 4.0 kW- motor feed 0.75 + 1.1 kW- motor Off longitudinal sealant 2.2 kW- voltage 50 Hz, 400 V- total power 9.15 kW- speed saw 2800 rpm saw blade FI 350 mm, bore 30 mm- feed speed 30 - 60 m/min compressed air requirement 8 bar- Dimensions L=3960,W=1400, H=1800 mm- Weight 1200 kg