máquinas injetoras usadas para venda

Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12

Used machine in good condition. Available for immediate delivery. - Air Valves: 1 - Screw diameter: 50 mm - Shot weight max: 353 g - Injection rate: 217 cm?/s - Injection pressure: 1.430 bar - Injection volume: 343 cm? - Platen size (h x v): 820 x 750 mm - Ejector force: 1750 kN - Core pulls: 1 - Power: installed max: 15,3 + 30 kW - Operating hours: 0 - Dimensions (long x wide x high): 5.750 x 1.680 x 2.190 mm - Weight: 11.500 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Clamping force: 2400 kN - Shot weight max: 456 g - Injection rate: 2.375 cm?/s - Injection pressure: 1.890 bar - Injection volume: 475 cm? - Screw L/D ratio: 22,7 - Nozzle stroke / force max.: 88 mm / kN - Mould opening stroke max: 510 mm - Mould height max: 800 mm - Mould height min: 260 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 534 kN - Core pulls: 0 - Oil tank capacity: 420 l - Operating hours: 0 - Power: installed max: 55 kW - Weight: 15.800 kg - Dimensions (long x wide x high): 7.208 x 2.075 x 2.187 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 77 g - Injection pressure: 2.500 bar - Injection volume: 85 cm? - Ejector stroke / force max.: 22 / 10 mm / kN - Daylight between platens max: 550 mm - Heating zones: 3.200 x 1.310 x 1.800 - Platen size (h x v): 540 x 540 mm - Distance between tie-bars (h x v): 321 x 321 mm - Mold opening force: 40 kN - Control: MC4 - Oil tank capacity: 170 l - Power: installed max: 15 kW - Operating hours: 55.000 - Weight: 2.300 kg

Arburg 270C 500-100 Year of construction: 1998 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot Interface Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal The machine has an additional control panel - control by remote control The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 2200 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All offered machines are started by our service technicians before they are sold. It is possib ...

1998 Arburg Allrounder 320 M 500 - 210, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones - no Weight 2610 kg, L x W: 4100 mm x 1200 mm year of made 1998 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg  ... mais informação

ENGEL ES 330/80 HLS injection moulding machine built in 1998 in Austria is designed for processing plastics by injection moulding. The injection moulding machine is equipped with top-quality components that increase productivity and efficiency. All parameters are conveniently programmed on the ENGEL CNC control installed on the machine body. The plastic processing machine weighs 4900 kg. Technical specifications of the ENGEL ES 330/80 HLS injection moulding machine - CNC controller: ENGEL - clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum screw speed: 400 rpm - minimum screw speed: 20 rpm - injection pressure: 1600 bar - injection speed: 113 mm/s - minimum mould height: 200 mm - maximum mould opening stroke: 450 mm - mould mounting platen dimensions (L x W): 660 x 560 mm - maximum distance between platens: 650 mm - mould mounting hole dimension (fixed plate) ...

Inv. Num. : 6279 Type: ES 500/90 HL-ST Producer: ENGEL Produced: 1998 Parameters: Clamping force: 900 kN Equipment: Robot system  ... mais informação

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible  ... mais informação

Krauss Maffei KM 110-700 C2 Year of construction: 1998 Injection unit: Screw diameter: 45 mm Spray weight: 278 g Injection pressure: 2336 bar Dosing volume: 305 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Parallel Movements Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) The machine was regularly serviced by the authorized service Krauss Maffei in Switzerland Metrics: Weight: 6200 kg Length/Width/Height: 4.66x1.51x2.19 m Drive: Pumps/motor: 18.5 ...

KRAUSS MAFFEI KM 125-520C1 (1998) Clamping force: 1250 kN Mold opening force: 70 kN Traversing force opening/closing platen: 35/28 kN Clamping platen (hxv): 745 x 770 mm. Clear width (hxv): 470 x 470 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 10 kN Injection unit: SP520 Screw diameter: 45 Ls/D Ratio: 20 Injection pressure: 1878 bar. Swept volume: 275 cm3 Shot weight PS: 250 gr. Injection flow: 159 cm3/s Screw speed. Standard/ZE: 307/391 1/min Plasticizing flow: 31/40 Pump motor rated output: 18.5 kW Installed heating capacity: 13 kW Control zones, barrel heating: 5 Dry cycles: 1900 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 6.000kg Length x Width x Height: 4.48 x 1.51 x 2.19 m. Max mold weight: 1485 kg. Plasticizing u ...

KRAUSS MAFFEI KM250-1000C1 (1998) Clamping force: 2500 kN Mold opening force: 160 kN Traversing force opening/closing platen: 86 kN Clamping platen (hxv): 995 x 1050 mm. Clear width (hxv): 630 x 630 mm. Mold opening stroke: 820 mm. Mold installation height min: 330 mm. Maximum daylight: 1150 mm. Ejector stroke: 200 mm. Ejector force forward/back: 58 kN Injection unit: SP1000C Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 523 cm3 Shot weight PS: 476 gr. Injection flow: 428 cm3/s Screw speed. Standard/ZE: 65/80 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Oil filling: 720 l. Max mold weight: 3430 kg. Dimensions: Net weight with control cabinet: 12.500kg Length x Width x Height: 5.97 x 1.04 x 2.36 m

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t  ... mais informação

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1905 bars PS plasticization capacity: 690 Kg / h CLOSING UNIT Closing force: 3300 kN Mold thickness Mini / Max: 330/710 mm Max distance between tray: 1385 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm GENERAL Heat output: 55 kW Total installed power: 78 kW Quantity of oil: 700 l. EQUIPMENT - NC4 control - Electric motor on metering - Integrated hot ducts - EUROMAP - 3 Hydraulic cores - 3 Sequential cores - 1 Air core

Injection unit Screw diameter: 50 mm Closing unit Closing force : 1800 kN Distance between tie-bars: 560 x 560 mm Other Commissioning: 1998 Tonnage: 180 ... mais informação

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 358 cm³ Pressure on the material: 2400 bars CLOSING UNIT Mold thickness Mini / Max: 330/710 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm EQUIPMENT - Electric motor on injection ... mais informação