máquinas injetoras usadas para venda

Sandretto injection press series 7 135 tons sandretto series 7 135 ton Injection molding machine ... mais informação

SANDRETTO series 7 177/60 Clamping force: 60 T - 600 KN Distance between columns: 301 X 301 mm Tray dimensions: 455 X 455 mm Min/max mold thickness: 80-350 mm Volume injected: 125 cm3 Material pressure: 1408 bar Screw diameter: 40 mm Heating power: 6KW Weight: 2900 kg ... mais informação

Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm. ... mais informação

There are two identical injection moulding machines available. ... mais informação

Clamping force: 85t, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t. ... mais informação

Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t. ... mais informação

I am selling a Nissey injection molding machine made in Japan in 1989. Closing force 1610 kN Distance between columns 460x460 mm Auger diameter 50 mm Injection volume 353 cm³ Material pressure 1715 bar Installed power 32.3 kW Condition - faulty, reason - they did not find a specialist to configure the hydraulic pump control unit after replacing it with a new one. Price is negotiable

Manufacturer Krauss Maffei Type KM 250-1200 B Control MC 3 Built in 1990 Closing unit Closing force t 250 Opening path mm 820 Holm size mm 630 x 560 Installation height min/max mm 330 Plate size 900 x 830 Spraying unit Screw diameter mm 60 Spray volume cm3 678 Spray weight gr 610 Spray pressure bar 1778 Dimensions and weights Dimensions LxWxH m 8.28 x 2.24 x 2.35 Machine weight Kg 12600 Other

Manufacturer Demag Type D 125-275 Control NC 3 Built in 1990 Closing unit Closing force t 125 Opening path mm 430 Holm size mm 460 x 460 Plate size 700 x 700 Spraying unit Screw diameter mm 38 Spray volume cm3 170 Spray weight gr 156 Dimensions and weights Dimensions LxWxH m 5.5 x 1.5 x 2 Machine weight Kg 6500 Other core pulling: 2 pcs Euromap 12

Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg

Displacement: 1500 cm³ Clamping force: 2500 kN Injection pressure: 2000 bar Table height: 1,000 mm Locking system: fully hydraulic Voltage: 380 V Motor power: 26 kW Cooling water: 1 m³/h Weight: 5.5 t - Injects from above (type ZO) - Ergonomic overall design of the vertical machine - Generously dimensioned clamping unit - Extensive automation options for vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

Horizontal press with the possibility of vertical processing ... mais informação

Engel 330/80 injection press Year 1990 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Sandretto Series 350 Injection molding machine Ask for technical details. ... mais informação

screw size: 84 mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 440 kNvolumn: 1660 volt: Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Description Verticalizable ... mais informação

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

Italtech 5500 Tons injection molding machine, overhauled in 2015, changed with a new motor, inverter, PLC and screw chamber, screw diameter 220 mm, injection volume 66904 cm3, injection capacity polystyrene base 57,54 kg., pressure bar 1450 bar, mold thickness max - min 2500 - 800 mm, passage between columns 2200 x 2200 mm, dimensions of the shelves 3480 x 3480 mm, column diameter 465 mm, total weight 344 tons, dimensions 24.5 x 4.8 x 4.7 m.

clamping force: 500 kNinjection volume: -- cm³screw diameter: 25 mmplaten size: 400 x 400 mmCondition: used,Specification: horizontal injection molding machine, - usedinjection unit:- Screw diameter: 25 mm- shot volume max.: -- cm³- injection pressure approx.: 1290 bar- heating zones: 4- Heating power: 4 kWclamping unit:- clamping force: 500 kN- opening stroke max.: 325 mm- platen distance max.: 550 mm- clamping platen size approx.: 400 x 400 mm- tie bar distance: 270 x 270 mm- pump motor: 15 kW- total power: 19 kW- operating voltage: 380V, 50Hz- Weight approx.: 1.870 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.