extrusoras usadas para venda

turning dia. over bed: 3.520 mmturning diameter over slide: 3.000 mmturning diameter over slide: 2.440 mmturning length: 15.000 mmControl: Sinumerik 840 D SL turning speeds: 50 U/minworkpiece weight max.: 80.000 kgturning diameter: orig. 3500 / mod. 2400 mmaccuracy +/-: 0,01 °total power requirement: 110 kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 m- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system.- In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to bereworked.Thus, the entire bearing arrangement was modified and optimally adjusted.- In addition, control and safety-related points had to be modified.- Geometric acceptance report- Temp ...

Extrusion line consisting of: - Bandera 45 extruder - year 1960 - 15 kW, 400 V - diameter 45 - ratio L / D 20 - mechanical gearbox - Gauge holder bench - towing - disc cutting and overturning - Pagani brand ... mais informação

Extrusion line consisting of two extruders: - Bandera 60 extruder - year 1960 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - variable V gearbox - Union extruder 60 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - mechanical gearbox - 400 mm coextrusion table - Towing, cutter, oven, Pagani exit tunnel - Tecnofar calender width 450 mm

Bandera 60 extrusion line 25 kW, 400 V Year 1961 Diameter 60 L / D ratio 20 Variable V gearbox With electrical panel Gauge holder bench with vacuum pump and variable speed track drive, Pagani brand ... mais informação

Entire coextrusion line consisting of: - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1969 - variable V gearbox - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1965 - mechanical gearbox - 700 mm coextrusion table - Towing cutter, oven, Tecnofar exit tunnel with hydraulic variators - Omipa calender width 1000 mm with hydraulic variators - year 1976

turning diameter over bed: 920 mmturning diameter over slide rest: 600 mmturning length: 12000 mmloading capacität: 20 tons turning speed range: 3,6 - 172 U/minvolt: 380 Vtotal power requirement: 90 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Flag - POS Used machine visible in Italy, sold as it is ... mais informação

in very good working condition  ... mais informação

N 1 UNION die, used for the extrusion of a profile for 60 mm diameter shutters, complete with screw and asynchronous motor 380 V, 7.75 KW, with six gears. Changed cylinder and screw in 1985. Replaced screw in 2015. Construction year 1976. Capacity : 30 kg/h in 3rd gear. N 1 TEM electrical panel, used with six zones with thermoregulators and thermocouples by Scotti Instruments s.p.a. N 1 Automatic equipment, used, for P.V.C. profiles rigid brand CERRINI type C.P. 80/PW complete with calibrator holder plate with vacuum pump with 4.1 KW motor, towing unit, cooling unit with fan with 0.75 KW motor, punching unit, stick stop punching unit, cutting unit and automatic tilting unit of mt. 6. Complete equipment for rolling shutter rigid pvc profile extrusion (produced in 1995) N 1 complete chain of resistances N 1 steel calibrator Complete equipment of rigid pvc profile extrusion for shut ...

Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.

see PDF attached  ... mais informação

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly. ... mais informação

Conic 60/126 extruder Machine can be seen in working condition Machine has been worked on PVC material ... mais informação

see PDF attached  ... mais informação

Description: The forming machine is equipped with automatic sheet feeding unit. The sheet feeding unit also have a top preheater by the design of Illig. It is fully equipped with pneumatic cylinders and ceramic heating elements.Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 4,000 mm, weight approx.: 12,000 kg

Calibration table See PDF  ... mais informação

Description Single-oven smooth PVC pipe belling machine Possibility to process from 100 to 500mm diameters Tolling for diamters 400 mm and 500mm ... mais informação

pdf description attached  ... mais informação

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26  ... mais informação