extrusoras usadas para venda

Producer: Metalchem sp z o.o. (today ICHEMAD-Profarb sp. o.o., ichemad) A demonstration device, presented at the fair. Product: single-screw extruder with a head with a spiral core Purpose: for the production of single-layer HDPE pipes in the form of granules, up to a diameter of 250 mm The main technical parameters: extruder: - screw diameter 90 mm - the relative length of the screw 30d - barrier type barrier, high-performance for HDPE - installed power ~ 170 kW - design performance ≥ 450 kg / h   Head - number of heating zones 8 - heating power 33.4 kW (230V) - equipment: fitted mouthpiece and a core for the production of Ø180x16,4 pipes   Control system: The extruder is equipped with a microprocessor control and visualization system based on a central Allan Bradley controller with an industrial monitor with a function keyboard with standard contro ...

CAPUZZI M20 + M22 + M25 mm corrugator line. OFFER: CAPUZZI CORRUGATOR TEAM composed of: - CAPUZZI CORRUGATOR EQUIPMENT made of water-cooled aluminum -3 sets of MOLDS for corrugated tube measures M20 + M22 + M25 mm. external diameter. ... mais informação

For sale a complete extrusion line in good condition, produced in 2004 by A + G Austria. Extruder KMD110 (Krauss Muffai) 1996 The line is designed for the production of a PVC window sill, 500mm wide, as well as a seamless panel with a width of 250mm. The appropriate extrusion tool is available. Line productivity 350kg / hour. The line allows you to process highly filled mixtures at a low cost. The set includes a screw loader. The cylinder augers after replacement have worked for 6 months

Thermoforming line for the production of OMV F-85 polystyrene plates, made in Italy, 2004, in operation no more than 2 years. The condition is almost new. The scheme of work is a closed technological cycle. Line composition: Extruder with a co-extruder D100 + D60 with a unit for mixing and dosing the material, calender unit, thermoforming machine F-85 with a system for stacking products, packaging machine, crushing unit, thermostats for calenders and thermal stamps, thermal stamp for dessert plates 167 mm 20 nests, thermal stamp plates flat 210 mm 12 nests with inserts for the production of plates 2x and 3x sectional. In working order.

Description EXTRUSION TAPE LINE - Screw Diameter 120 mm - L/D 25 - BD Plast Screen Changer - Motor Power 130 KW - Calender 1200 mm - Slow Stretching Line 1000 mm - Fast Extension Line 1000 mm - Corona Treatment - Rewinder ... mais informação

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep

twin screw extruder Manufacturer Mikrosan Model MÇV 67/22D Year 2004 ... mais informação

Mikrosan 90/23 PVC parallel extruder machine Capacity : 350 Kg / hour Machine is in good working condition. It can be seen in production. Screw and barrel has been recently replaced with new one. ... mais informação

according to description pdf  ... mais informação

An unrenovated very little used ready-to-use extrusion-recycling product EREMA type RGA 1716 TE-VSV for processing shredded washed PET flakes. The quality of the rPET for direct contact with food according to the standards of the F.D.A. (USA) and EFSA (EU) can be achieved with an additional machine with SSP technology. Year of construction 2001, Extruder screw Ø 160 mm (L/D about 34), drive 200 kW, EREMA screen changer type SW8/170RTF, high vacuum system, granulation of Previero, Siemens control with touch screen, Capacity 600 – 1,000 kg/h; usual power was 800 kg/h, Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 V

Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Mikrosan MCV 67/22 D Twin screw extruder New screws LD rate : 22 Max capacity : 140 kg hour Machine is in good working condition ... mais informação

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 A439697 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

x-travel: 3000 mmy-travel: 2500 mmz-travel: 1000 mmControl: Siemens type: 840 DFeed: 5-30.000 mm/minTable area: 2000x2170 mmtable load: 1500 Kg/m²T-slots: 22 H9distance between uprigths: 2500 mmspindle turning speed range: 6000 U/minspindle drive: 36 kWspindle taper: HSK 100Tool changer: 30 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 8x6,4x4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Four head embossing machine ... mais informação

Designed for winding of polymer and composite pipes with a diameter of 16 to 63 mm and automatic strapping of finished coils of polypropylene stripping tape. Year of production: 2005 Country of manufacture: Italy Condition: like new. Running about 300 hours. Then all extrusion production was stopped and never started again. The extrusion lines were sold separately. Coiling range of tubes: 16 - 63mm Packing: automatic polypropylene stretching tape. Synchronizing tensioning arm With pneumatic brake and tension sensor. Controls coil rotation speed and winding tension. Control panel with graphic display and digital keypad. Condition: fully operational. Can be demonstrated in dry cycle. Availability: immediate shipment