extrusoras usadas para venda

Description PNEUMOFORE COMPRESSOR SA 7.5 E8 Power 7.5 kW 8 bar 3900 rpm ... mais informação

Maximum Diameter: 70 mm // Minimum Diameter: 20 mm ... mais informação

Model year 2005 Lorex-1000 HS, E105U ac motor with drive, 350kg/hr Including fibrilattion unit Complete with 144 nos lohia LTW 200 CM winders ... mais informação

Description Complete multilayer Pex-Al-Pex pipes production line Main extruder Cincinnati Proton 45-30G Co-extruder Cincinnati CE-30 Cooling tank Cincinnati Sprayon 63T/5,8/3k Vacuum tank Cincinnati Vacon 63T/5,8/3k Haul-off Cincinnati Tracton 63/1C-6 Aluminum welder Leicht WIG-120 Aluminum unwinder AMT AH1,0/1700 Chiller HYFRA VWK30-1-S Aluminum pipe welder AIXCON PWU 400 Stockpile for raw aluminum, forming aluminum pipe, welding aluminum pipe UNIWEMA 30 KMW Generator for welder Huttinger BIG 40/100 Coating extrduer Cincinnati Proton 45-30G Glue co-extruder Cincinnati CE-30 Cooling tank Sider Jack Cooling tank Cincinnati Sprayon 63T/5,8/3k Haul-off Cincinnati RAE 63/1 X1 Marking machine IMAJE 9040 X ray gauge x SCITEQ X-ACT TWINEYE 40 Automatic winder FB Balzanelli TR1350 L1/8/M

Description Single Screw Extruder Screw Diameter 45 L/D 30 Installed Power 145 kW Working Hours 27970 ... mais informação

The line is offered TOTALLY RECONDITIONED., PREALPINA EXTRUDER 180 mm. 2 degassing points, for LDPE HDPE PP PS PC ABS EPS EPE EPS XPS..., average throughput rate 800-1.200 kg/h depending on materials and feeding rate Including: Buffer silo with agitators and feeding auger. Forced feeding unit. Extruder with 180 mm bimetallic screw 40 L/D Double vacuum degassing system a.c.355 kw a.c.drive controlled by ABB inverter Semi-automatic non-stop screen-changer with 300 mm diam. screens., FULLY AUTOMATIC NEW SCREEN-CHANGER AVAILABLE (+200 K€ +/-) hydraulic power pack Water ring pelletizing unit. Drying centrifuge., water re-circulating tank, Heat exchanging unit on gearbox group + cutting unit. Vibro-classifier., Control panel with touch screen Electric cabinets for managing the line, Constructed in 2006. Total installed power 650 kw, average used in work 420 kw User’s manuals, drawings, CE. ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

for HDPE LDPE PC PS ABS, nominal throughput rate 350-400 kg/h including:, loading belt, metal detector, Meccanoplastica Granulator 600 mm., n.3 + 2 knives 550 mm long, 37 kw drive, extraction vent buffer silo with agitators extraction screw, crammed feeder extruder with 105 mm screw diameter 36 L/D, vacuum degassing pump semi-automatic, non stop hydraulic screenchanger hydraulic pack water ring pelletizer drying centrifuge electric cabinet CE compliance The line is offered RECONDITIONED - see[how we recondition at Germanplast](https://www.germanplast.eu/pagine/photo-gallery)

Description GILDRESS ... mais informação

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT  ...

Maximum Diameter: 20 mm ... mais informação

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

see pdf  ... mais informação

x-axis: 700 mmy-axis: 1.000 mmz-axis: 500 mmmax. table load: 900 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3D coordinate measuring machine- PC with software, various probes- Renishaw PH10MQSoftware: PC-DMIS Pro 3.7 Maintenance Release 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer it dismantled and CIF ITALIAN PORT., In very good conditions,still connected, can be seen in work on appointment or on a video call. The line includes: N. 2 extruders diam. mm.55, 78 kW 30 L/D N. 1 extruder diam.75 mm. 142 kW, 30 L/D n. 3 lever type screen changers Melt control system 3-layers still die Ø mm.300 gap. mm.1,4 IBC cooling system AM500/2 dual flow cooling ring 2 temperature exchange batteries electrical cabinets with Mitzubishi inverters Oscillating pull-off system width mm.1700, working width mm.1600, Gusseting units FIFE web guider mm.1700 Bubble driver with vertical adjustment and sensor for automatic bubble inflating (maximum Ø 1.175 mm.) for 3.386 mm.web circumference) Back to back winding station 1.680 with 4 expandible mandrels Automatic film cutting Automatic reel unloading system Bolted 12 m.tall tower with 3 storey, ladders (10 m. at 3rd floor + 2 m. pul ...

Extruder with screw diam. 60 mm.35 L/D, for LDPE HDPE LLDPE PP PC PS ABS EPS EPE XPS Complete with scrap silo with agitators on bottom Connecting screw to crammed feeder Crammed feeder with vertical screw extruder with 60 mm screw 35 L/D n.1 vacuum degassing pump Semi-automatic non stop hydraulic screenchanger Water ring pelletizing unit Drying centrifuge Vibro classifier electric cabinet Total installed power 86 kw Used 50 kwh Average production rate 110-150 kg/h depending on material and feeding rate The line is offered as is or reconditioned

Corrugator (without tools) suitable for pipes up to 315 mm Manufacturer: Fränkische Type: FDC 315/36V Year of construction: 2007 (never used in production) Basic technical data: Max. product diameter: 315 mm Number of mould jaws: 36 Electrics: 3 x 400V 50 Hz + N + PE Extrusion height: 1100 mm Serial No.: MV-2034 Operating hours: 450 hours / mechanical only Condition: very good, never used in production, for mechanical demonstration only.

URGENT, Machine on pallet ready to be loaded, in production from 2008 to 2018 for plasticized PVC formulations ... mais informação

EXTRUSION LINES FOR SPIRAL PE PIPES / 300/1200 Max. diameter: 1200mm Min. diameter: 300 mm Diameter pipes D 300,400,500,600,700,800.900.1000,1200.SN4 and SN8 EXTRUDER/...1 Manufacturer/ Top Industri China Model/ D.65 Year/ 2007 Serial no./ No.1234 Screw diameter/ 65 Screw L/D ratio/ 33 Output capacity/ (kg/h) 250 Main drive power/r (kW) 50 Screen changer/ (YES/NO) No Co-extrud (YES/NO) No Running hours/ DIE HEAD Manufacturer/Fabricante Top Industri China Model/Modelo K2 Year/año 2007 Serial no./ No.1234 Extrusion tools and calibration tools A total of 8 sets of tools for extrusion and calibration of a square profile CALIBRATION TANK/ YES Manufacturer/ Top Industri China Model/lo Top Industri China 6000 Year/ 2007 Serial no./ No.1111 Pipe range diameter/ square profile No Vacuum pump/ 4kw Length/ 6000 COOLING TANK/ YES Number/ 1 Manufacturer/ To ...