máquinas de fiação, torção, bobinadoras, esticadoras usadas para venda

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...

SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...

1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER type BOWA with weigth pan, 2 TRÜTZSCHLER weighing feeder type PWSE 1200, 1 TRÜTZSCHLER Tuftmixer type FMN, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1 1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER bale opener type BO 1200, year 1999, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1, year 1999 3 TRÜTZSCHLER material reserve with trunk and condensor type MS, year 1999 1 TRÜTZSCHLER fine opener with feed trunk and condensor type FD-S, year 2004

3 RIETER cards type C4-A, year 1992, with TRÜTZSCHLER chute feed system type FBK 533 (year 2004), AutoSilver control type EZA–1, auto lever, auto doffer, pot diameter 60 cm, pot height 110 cm 1 RIETER card type C4, year 1987, with TRÜTZSCHLER chute feed system type FBK 533 (year 1999), AutoSilver control type EZA–1, auto lever, auto doffer, pot diameter 60 cm, pot height 110 cm

1 GALAN fancy yarn twister type Mini PR-F/3 MP, 6 spindles, ring diameter 120 mm, tube adjustable up to 500 mm, fully electronic control through step-by-step motors, electronic programmer type GTG-S-6. This machine was bought for a laboratory and has never really been used ... mais informação

1 POLYTEX pinking machine type ZH (Zigzag cutting) knife width 500 mm, serrated knife, stroke 50 mm, table size 505 x 945 mm, power driven swatch and sample cutting machine, precise and accurate thanks to right angle guide with millimeter graduation, exchange of knife is effortless and fast, motor 0,37 kW machine delivered with 2 new cutting boards (one to be used and one as spare)

1 SUPERBA steaming and shrinking machine type UNIVAP year 2001 machine runs 10 independent conveyor bands through one central steaming chamber never commissined (0 running hours) ... mais informação

1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).

1 SUPERBA thermosetting line of synthetic carpet yarns and spun wool and blends, type TVP-2S, year 1997, 36 yarns, capacity about 12 ton / day ... mais informação

W863 1 horizontal hydraulic bale press LTG, 1988 pressure about 20 t., feeding by 2 shutfeeders, bale dimension approx. 700 x 700 x 1200 mm, bale weight 80 - 120 kg  ... mais informação

4 HDB exhaustors/fans, 1999 high capacity for pipes 350-400 mm, with motor 22 kW, 380V/3Ph/50Hz price on application  ... mais informação

NUMBER 372 SPINDLES  ... mais informação

Number 56 positions  ... mais informação

Perfect condiction  ... mais informação

NUMBER 60 POSITIONS  ... mais informação

Number 72 spindles for preparation alluminium spools  ... mais informação

Number 256 spindles type M4 Eletric device final bobin 170mm motor 18.5 Kw  ... mais informação

Perfect guarantee  ... mais informação

NUMBER 60 POSITIONS SECTION 6 ALIMENTATION BOBIN-BOBIN LOAPFE TK830N SPLICER 4924E CYLINDRICAL DRUM TYPE BLOWER AUTODOFFING  ... mais informação