prensas usadas para venda

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Weight: 371kg. ... mais informação

Working surface: 2200x1250mm, pressing force: 65t, connected load: 1.4kW, length: 2540mm, width: 1450mm, height: 1950mm, weight: 2.6t. ... mais informação

Working surface: 2150x1150mm, pressing height: 300mm, pressing force: 50t, connected load: 2.4kW, length: 2500mm, width: 1150mm, weight: 1.8t. ... mais informação

Inclination: 15°, an on-site visit is possible. ... mais informação

gebr. Kantenanleimmaschine Fabrikat: Format 4 Typ: Tempora 60.12/2 E Baujahr: 2020 -unüberholt- ohne Gwährleistung e- Motion Steuerung Oberer Druckbalken: - Druckbalken aus geschweißter Verwindungsstreifer Stahlkonstruktion. Motorisch gesteuert einstellbare Werkstückhöhe 8-60 mm über e-motion Steuerung. - Glatte,zweireihig versetzt angeordnete Oberdruckrollen, die dafür sorgen,dass eine gleichmäßige Druckverteilung auf das Werkstück stattfindet. - Werkstückabstandüberwachung durch eine Ampel. - Drehteller Kantenmagazin für Rollenkantenmaterial 0,4-3 mm: - Ø des Drehtellers:800 mm - Streifenmagazin für 12 Stück: 10 mm Kanten - Kantenzufuhrung für Rollen- und Streifenmateral tempora Serie - Pneumatisch gesteuertes, Teflonbeschichtetes Leimaggregat für 1,5 Kg EVA Granulat - mit synchronisierter Leimrolle und Schnellwechselsystem. Geeignet f ...

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Carousel press with hydraulics from the manufacturer LISY - DVOŘÁK Working length: 2200 mm Working width: 1200 mm Maximum wood thickness: 60 mm Max pressure: 100 bar ... mais informação

Brick press with self-cleaning system A-200 Bogatyr2” Productivity 480 bricks per hour Total pressure of hydraulic cylinders: maximum 240 tons (top of them) Product size, max 270x250x110/90 mm Operator panel 7 inch display Built-in help and hint system Automatically check the density and height of the brick in each cycle Control of brick parameters for rejection in each cycle Yes Automatic adjustment to eliminate defects in the next cycle Yes Overall dimensions, no more than 2200x1300x2400 mm Weight of the press with oil station, no more than 3.2 tons

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm ... mais informação

Description: Loader belt dimensions 1920 X 3200 mm , Integral loader dimensions: 2200 x 4400 x 1000 mm  , Unloading roller conveyor dimensions:  ,1900x 2500 x 1000 mm  , Pressing table dimensions: 1900 x 3500 mm  , Equipped with No. 6 pressing plungers DIAM: 150 mm approx  ,Approx. Onsite Dimension. (l x w x h): 9,500 x 3,000 x 2,100 mm, weight approx.: 6,000 kg

Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KWApprox. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg

Description: • Perforated plate hydraulic press for chairs • Serial number 1227 • Table dimensions 1540 x 940 mm • Main table with 2 positionable hydraulic pressure cylinders • Lower table with 2 hydraulic pressure cylinders, table dimensions 500 x 500 mm • Hydraulic pump with motor of 1.10 KW-2850 rpmApprox. Onsite Dimension. (l x w x h): 1,660 x 1,250 x 900 mm, weight approx.: 400 kg

Description: Pressure 80 to 200 tons, heating surface 1300 x 3500 mm, 6 cylinders in total, without CE certificate ,Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 2,300 mm, weight approx.: 6,000 kg ... mais informação

Description: A total of 6 cylinders, adjustable in height, without wood, with screw clamps approx. 15 pieces, without further accessories ,Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 2,000 mm, weight approx.: 380 kg ... mais informação

Description: Internal height min. 200 mm, max. 1350 mm Width min. 200 mm, max. 2500 mm Without CE certificate Voltage 400 V Pressure according to technical documentation up to 2000 kpApprox. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 2,500 mm, weight approx.: 2,000 kg ... mais informação