subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 107)
Complete retrofit including control + new oil pump (2019), equipped with 4000 mm between the columns, C size 410 mm, control panel, DSP safety Laser, light curtain rear, Attention! Lot runs up to 1200 mm below level, Buyer is responsible for the dismantling and moving out of this lot, this must be carried out in a professional manner, viewing + collection by appointment!
This 4-axis DMG SAUER LASERTEC 40 Laser engraving and cutting machine was manufactured in 2008. It utilizes a Nd:YVO4 laser with a wavelength of 1064 nm, ensuring precise and detailed work. The machine features an acousto-optic Q-Switch for pulse enhancement, contributing to its efficiency and quality. A cooling system using deionized water maintains optimal temperature during operations. Buy this DMG SAUER LASERTEC 40 Laser engraving and cutting machine. For more information about this laser engraving and cutting machine, please reach out to us.
Description: serial number: KOSPAR/2025/08/2017 working hours: power on time: approx. 5460 hrs. run time: approx. 3129 hrs. cutting time: approx. 1233 hrs.  , max. component diameter: ,160 mm min. component diameter: ,50 mm max. component length: ,1000 mm min. component length: ,100 mm max. spindle working speed: ,1400 rpm min. spindle working speed: ,600 rpm  , overall dimensions including with all conveyors: ,5500 x 5450 x 2400 mm  , transport dimensions: machine: ,5100 x 1700 x 2400 mm feeder: ,2200 x 1400 x 1300 mm receiver: ,2200 x 1400 x 1300 mm chip conveyor: ,4950 x 1000 x 1900 mm  , tools are not included in the offer except the standard set of 4 clamping jaws  , please also have a look at the videos and the PDF document of this machine weight approx.: 6,700 kg, Approx. Onsite Dimension. (l x w x h) ...
Description: serial number: 041701 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
Description: bending diameter range for bending strength modulus (RS=250N/mm2): ,1.3 m3 maximum pipe diameter: ,32 mm minimum pipe diameter: ,4 mm maximum pipe length for mandrelless bending: ,9999 mm minimum pipe length for bending with a mandrel: ,4450 mm  , single dimensions machine: 5200 x 1000 x 1200 mm control cabinet: ,600 x 900 x1900 mm  , set includes a safety mat, a SICK light curtain and tools but only those visible in separate photos (not mounted on the machine) offer does not include fences or other tools mounted on the machine  , please also have a look at the PDF document of this machine tube length max.: 9,999 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,000 x 1,900 mm
Description: working length: 2000 mm max. sheet thickness: 2 mm machine is in good technical condition, after previous agreement the possibility of testing Approx. Onsite Dimension. (l x w x h): 2,780 x 640 x 1,390 mm, weight approx.: 2,300 kg ... mais informação
Description: serial number 1703026 nominal mains voltage 3 x 400 V, 50 Hz nominal network power 42 kVA mains fuse 3 x T 63 A maximum current absorption 3 x 71 A idle voltage (DC) 350 V discharge current steps 3 the maximum thickness of the material to be cut (steel) max. 45 mm supply air pressure 0.6 - 0.7 bar required amount of air 230 liters/min thermal insulation class 155 degrees Celsius IP21 protection  ,Approx. Onsite Dimension. (l x w x h): 540 x 710 x 710 mm, weight approx.: 230 kg
Description: Plasma + oxygas type CNC very little used cutting thickness: plasma- 20mm, Oxy- 100 mm from the side, but without penetrating the board. useful strokes: 2000 x 6000 x 100 mm solid frame made of steel profiles linear guides ISEL Germany drive with pinion-rack system rotary encoder servomotors on all axes General Numerical CNC specialized for plasma cutting hypertherm powermax 105 plasma generator automatic pistol with anti-collision protection automatic THC database with optimal processing parameters CE compliant machine FastCAM professional software – including nesting Hypertherm Powermax 105 source dimensions: exhaustor 700 x 700 x 2500 mm dimensions: plasma 6500 x 3500 x 1900 mm weight: 4000 kg Please take a look at videos of this machine!plate thickness: 20 mm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,500 x 2,500 mm
Description: serial number: 041109 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
Description: serial number: 041478 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
own weight: 6.8ton; Including pallet parts ... mais informação
Bombled mechanical shear 2000mm 220V 50Hz model: KF1 ... mais informação
The MTM-KA1000 multi-electrode machine is designed for the production of masonry mesh from round bars straightened and cut to the required size. The length of the welded mesh can be any and depends only on the length of the longitudinal rods. The width of the welded mesh is 350mm -1000mm; The diameters of welded rods are 3mm -6 mm; Distances between the axes of the rods: transverse 50mm - 200mm; longitudinal 50,100,150,200mm; Rod material: low-carbon steel, smooth or BP; The number of welded transverse rods is 40 pcs/min; Rated voltage 3 ph. mains, 50 Hz, 380V; Maximum power consumption 75-100 kVA; Compressed air pressure in the network, MPa (kgf/cm2) 0.63 (~6.3); Free air flow 2 m3/min; Overall dimensions 1800x1800x1700 mm; Weight 2000 kg
Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.
4-roll Hydraulic plate bender 8000 x 40 mm. 1960 Froriep 8000Х40 mm Plate rolling machine - 4 rolls 8000Х40 mm ... mais informação
Hydraulic press brake 160t / 3200mm with controller E21 (automatic adjustment of the back stops). The status of the new machine Year 2016 ... mais informação
We sell Turret punch press - MP10-30 used, 2007, manufacturer JIANGSU YANGLI GROUP CO. Possible leasing, rent-to-own. They are also interested in intermediaries with a place to store equipment (they are ready to pay for rent). MP10 CNC series punching machine has a body structure (ZL2004 2 0108852.4), which adopts tempering treatment. German I + L. The hydraulic system has reliable performance and low power consumption (1 1 kW). FANUC CNC system OIS or SIEMENS 840D is used on this punch series. The revolving type (ZL 022 1821 1.X) features a long sleeve structure and the station index has a sectional wheel and a worm gear.
ESPE ESPE CTO 125/3125 press brake 1996 serial number 332200/T29-07 ... mais informação
Valley. Crank shears with an inclined blade for a sheet of 20x2000 mm, model NLZ427B, are designed for cutting sheet metal with a thickness of up to 20 mm and a tensile strength of S 500 MPa. Scissors can be used in the procurement workshops of metal structures, machine-building enterprises, repair and other plants, when used in climatic zones with a temperate and cold climate version UHL, dry and humid tropical - version O; placement category 4 according to GOST 15150 - 69 The lower value of the air temperature must be at least +5 0С. Designed for cutting metal up to 20mm thick 1. Maximum cutting force, kN 1000 2. The largest dimensions of the metal being cut with temporary 3. resistance