trabalho de chapa metálica usadas para venda

I offer hydraulic shears not sheet metal marked NTA 3150/10A manufacturer Strojáreň Piesok. The maximum cutting length is therefore 3150 mm and the strength of the structural steel sheet is 10 mm. Plugged in, fully functional, but so rarely used that its not worth my while to keep them. (they do not fit into our primary production segment) Price negotiable, buyer arranges transport, total weight 14,000 kg Possibility of viewing, testing - at the Chrudim facility

The line has undergone commissioning and is in good condition. Not used. It is under conservation. Rod diameter from 5mm to 12mm; Mesh width 800mm-2500mm; The pitch between the axes of the transverse rods (multiples of 50mm) is from 50mm to 300mm; The pitch between the longitudinal bars is from 100mm to 300mm; Welding speed of cross bars is 55-80 cycles/min. n Line composition: Main machine - 1 piece; Chiller - 1 piece; Compressor - 1 pc.; Dryer - 1 pc.; Receiver 1000 liters - 1 piece; Operator control panel (in Russian) - 1 pc. Optional equipment: The machine cuts correctly. Rod diameter from 5mm to 12mm; The length of the rods is 6 m; Speed 130m/mi. Specifications Power supply: alternating three-phase current 380V 50 Hz; Cascade welding mode; Transformer power 150 kW - 12sh; Peak power 315-630 kW; Nominal pressure, air flow 06.-10.0MPA, 130m3; Supply voltage 3 p ...

LINE FOR LOWER AND CROSS-CUTTING OF COILS (annual capacity 10 000 t): Sheet thickness: from 0.4 mm to 2.0 mm Sheet width: from 800 mm to 1580 mm Material: cold rolled and galvanized sheet metal Strength limit: max. 480 MPa (for max. thickness of 1.5 mm) Yield strength: max. 250 MPa (for max. thickness of 1.5 mm) Output material parameters - cut sheets Width tolerance up to: +/- 0.1 mm according to EN 10140 Length tolerance up to: +/- 0.3 mm according to EN 10140 Maximum number of longitudinal stripes: 6 (for max. thickness 1.5 mm) Maximum number of longitudinal sections: 5 (for max. thickness 1.5 mm) Minimum width of one strip: 180 mm Minimum length of boards: 200 mm Maximum length of the boards: 3500 mm +

Rolling mills for cold rolling of sheets 2 types of LSTC profiles (C and U) + PIR profile panel. Documents with characteristics can be obtained as a file. to or email. ... mais informação

Automatic line for the production of sandwich panels of the LL-2000 brand of the P-SYSTEMS plant (Czech Republic), 2003. The line is designed for the production of wall and roof sandwich panels with mineral wool and polystyrene foam insulation. The manufacturing process is automatic. Requirements for raw materials for sandwich panel sheathing - thickness 0.4 ... 0.6 mm .: - sheet steel galvanized The production process is carried out automatically (with the exception of the laying of insulation and the preparatory process). Completeness of the line, technical characteristics: - Unwinding device - 2 pcs. - Profiling area. - Table for supplying insulation. - Glue application and distribution device. - Steel strip heating section. - Pressing device. - Transverse movable cutting device. - Line control system. Line productivity per shift (8 hours) 1000 sq.m. The maximum spe ...

material width:150 mmmaterial thickness:2,5 mmfeed length:100 mmcompressed air:6 barclamping force of fastening pincer:2000 Nclamping force of moving pincer:2000 Nfeeding force:1200 Nweight:0,1 tDimensions (WxDxH):0,35 x 0,85 x 0,5 m ... mais informação

material width:850 mmmaterial thickness:0,3 - 1,5 mmno. of straightening rolls:8 straightening roll diameter:40 mmnumber of draw-in rolls:2 diameter of draw-in rolls:160 mmmaterial thickness with 600 mm material width:1,9 mmmaterial thickness with 400 mm material width:2,3 mmspeed:5 - 25 m/minmin. material width:200 mmweight:2,8 tDimensions (WxDxH):1,6 x 2,2 x 2,3 m

material width:850 mmmaterial thickness:0,3 - 1,5 mmno. of straightening rolls:8 straightening roll diameter:40 mmnumber of draw-in rolls:2 diameter of draw-in rolls:160 mmmaterial thickness with 600 mm material width:1,9 mmmaterial thickness with 400 mm material width:2,3 mmspeed:5 - 25 m/minmin. material width:200 mmweight:3,1 tDimensions (WxDxH):2,2 x 1,5 x 2,8 m

material width:300 mmmaterial thickness:- 3,0 mmno. of straightening rolls:7 Stückstraightening roll diameter:60 mmweight:0,8 tDimensions (WxDxH):0,9 x 1,5 x 1,4 m ... mais informação

table length:2000 mmtable width:600 mmtable height:300 mmmounting surface:700 x 600 mmcentre distance:1200 mmcentre height:160 mmDimensions (WxDxH):2,0 x 0,6 x 0,3 m ... mais informação

material width:380 mmcoil weight:1,0 tmaterial thickness:2,5 mmcoil external diameter:1000 mmno. of straightening rolls:7 straightening roll diameter:50 mmnumber of draw-in rolls:2 diameter of draw-in rolls:90 mmweight:0,8 tDimensions (WxDxH):0,8 x 1,3 x 1,7 m ... mais informação

material width:500 mmmaterial thickness:0,6 - 1,6 mmno. of straightening rolls:7 straightening roll diameter:60 mmnumber of draw-in rolls:2 + 2 inlet roll diameter:60 mmmax. material thickness:2,0 mmmaterial thickness at 150 mm material width:2,0 mmmaterial thickness at 500 mm material width:1,6 mmweight:0,5 tdimensions (WxDxH):0,8 x 1,0 x 1,2 m

material width:400 mmcoil weight:3,0 tmaterial thickness:0,5 - 4,0 mmcoil internal diameter:460 - 530 mmcoil external diameter:1500 mmno. of straightening rolls:9 straightening roll diameter:50 mmno. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mmmaterial cross-cut:1600 mm²speed of coil line:0 - 20 m/minpower requirement:35,0 kWweight:10,5 tdimensions (WxDxH):10,0 x 2,5 x 2,9 mstraightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mmmaterial thickness:0,6 - 2,5 mmno. of straightening rolls:7 straightening roll diameter:60 mmnumber of draw-in rolls:2 + 2 diameter of draw-in rolls:60 mmmax. material thickness:3,5 mmmaterial thickness at 30 mm material width:3,0 mmmaterial thickness with 300 mm material width:2,5 mmweight:0,3 tDimensions (WxDxH):0,9 x 1,0 x 1,1 m

plate thickness:4 mmblade length:180 mmweight of the machine ca.:21 kgdimensions of the machine ca.:400 x 100 x 1500 mm ... mais informação

material width:550 mmmaterial thickness:0,4 - 1,6 mmno. of straightening rolls:11 straightening roll diameter:60 mmnumber of draw-in rolls:4 diameter of draw-in rolls:60 mmband speed:4 - 50 m/minpower capacity:3,0 kWweight:1,7 tDimensions (WxDxH):2,5 x 2,0 x 1,7 m ... mais informação

material width:320 mmcoil weight:2,6 tmaterial thickness:0,5 - 2,0 mmcoil internal diameter:400 - 510 mmcoil external diameter:1200 mmno. of straightening rolls:7 straightening roll diameter:50 mmnumber of draw-in rolls:2 band speed:0 - 30 m/minpower capacity:1,5 kWweight:1,5 t ... mais informação

material width:120 mmmaterial thickness:0,4 - 4,0 mmno. of straightening rolls:19 straightening roll diameter:24 mmmaterial cross-cut:120 mm²:40 mmbending speed:5 - 25 m/minweight:0,85 tdimensions (WxDxH):1,2 x 1,7 x 1,6 infinitely variable drive:Stöber  ... mais informação

material width:400 mmmaterial thickness:0,6 - 2,8 mmno. of straightening rolls:5 straightening roll diameter:40 mmno. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mmmaterial thickness at 65 mm material width:2,8 mmpower capacity:3,0 kWweight:0,45 tDimensions (WxDxH):0,8 x 1,8 x 1,35 m

material width:250 mmmaterial thickness:0,2 - 2,0 mmno. of straightening rolls:7 straightening roll diameter:60 mmrun-in height:1250 mmpower capacity:4,0 kWweight:0,65 tDimensions (WxDxH):1,05 x 1,25 x 1,5 m ... mais informação