subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 107)
material width:250 mmmaterial thickness:0,25 - 3,0 mmno. of straightening rolls:11 straightening roll diameter:30 mmspeed:6 - 60 m/minpower requirement:15,0 kWweight:1,1 tdimensions (WxDxH):1,1 x 1,7 x 1,5 mstriaghtening pressure automatic:hydraulic coil loof control:ultrasonic ... mais informação
material width coil line:600 mmcoil weight:2 x 3,5 tcoil internal diameter:460 - 530 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmno. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mmfeed length:0 - 500 mmpower requirement:10,0 kWweight:10,0 tdimensions of the coil line:8,8 x 4,0 x 2,55 mstraightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed
This 4-axis DMG SAUER LASERTEC 40 Laser engraving and cutting machine was manufactured in 2008. It utilizes a Nd:YVO4 laser with a wavelength of 1064 nm, ensuring precise and detailed work. The machine features an acousto-optic Q-Switch for pulse enhancement, contributing to its efficiency and quality. A cooling system using deionized water maintains optimal temperature during operations. Buy this DMG SAUER LASERTEC 40 Laser engraving and cutting machine. For more information about this laser engraving and cutting machine, please reach out to us.
Description: serial number: KOSPAR/2025/08/2017 working hours: power on time: approx. 5460 hrs. run time: approx. 3129 hrs. cutting time: approx. 1233 hrs.  , max. component diameter: ,160 mm min. component diameter: ,50 mm max. component length: ,1000 mm min. component length: ,100 mm max. spindle working speed: ,1400 rpm min. spindle working speed: ,600 rpm  , overall dimensions including with all conveyors: ,5500 x 5450 x 2400 mm  , transport dimensions: machine: ,5100 x 1700 x 2400 mm feeder: ,2200 x 1400 x 1300 mm receiver: ,2200 x 1400 x 1300 mm chip conveyor: ,4950 x 1000 x 1900 mm  , tools are not included in the offer except the standard set of 4 clamping jaws  , please also have a look at the videos and the PDF document of this machine weight approx.: 6,700 kg, Approx. Onsite Dimension. (l x w x h) ...
Description: serial number: 041701 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
Description: bending diameter range for bending strength modulus (RS=250N/mm2): ,1.3 m3 maximum pipe diameter: ,32 mm minimum pipe diameter: ,4 mm maximum pipe length for mandrelless bending: ,9999 mm minimum pipe length for bending with a mandrel: ,4450 mm  , single dimensions machine: 5200 x 1000 x 1200 mm control cabinet: ,600 x 900 x1900 mm  , set includes a safety mat, a SICK light curtain and tools but only those visible in separate photos (not mounted on the machine) offer does not include fences or other tools mounted on the machine  , please also have a look at the PDF document of this machine tube length max.: 9,999 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,000 x 1,900 mm
Description: working length: 2000 mm max. sheet thickness: 2 mm machine is in good technical condition, after previous agreement the possibility of testing Approx. Onsite Dimension. (l x w x h): 2,780 x 640 x 1,390 mm, weight approx.: 2,300 kg ... mais informação
Description: serial number 1703026 nominal mains voltage 3 x 400 V, 50 Hz nominal network power 42 kVA mains fuse 3 x T 63 A maximum current absorption 3 x 71 A idle voltage (DC) 350 V discharge current steps 3 the maximum thickness of the material to be cut (steel) max. 45 mm supply air pressure 0.6 - 0.7 bar required amount of air 230 liters/min thermal insulation class 155 degrees Celsius IP21 protection  ,Approx. Onsite Dimension. (l x w x h): 540 x 710 x 710 mm, weight approx.: 230 kg
Description: Plasma + oxygas type CNC very little used cutting thickness: plasma- 20mm, Oxy- 100 mm from the side, but without penetrating the board. useful strokes: 2000 x 6000 x 100 mm solid frame made of steel profiles linear guides ISEL Germany drive with pinion-rack system rotary encoder servomotors on all axes General Numerical CNC specialized for plasma cutting hypertherm powermax 105 plasma generator automatic pistol with anti-collision protection automatic THC database with optimal processing parameters CE compliant machine FastCAM professional software – including nesting Hypertherm Powermax 105 source dimensions: exhaustor 700 x 700 x 2500 mm dimensions: plasma 6500 x 3500 x 1900 mm weight: 4000 kg Please take a look at videos of this machine!plate thickness: 20 mm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,500 x 2,500 mm
Description: serial number: 041109 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
Description: serial number: 041478 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
Bombled mechanical shear 2000mm 220V 50Hz model: KF1 ... mais informação
ESPE ESPE CTO 125/3125 press brake 1996 serial number 332200/T29-07 ... mais informação
bending radius min.: 10 - 300 mmBending Angle: 0 - 180 °0: 1,25 / 2,6 U/minMotor Capacity: 1,5 kWweight: 135 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
: neu : 2024 : 9731 : Juni 2024, Zwischenverkau : Türkei : 30100 €: 611.03 €: 1 : 3100 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and ...
Slitting line HJ Loop 1600mm x 9mm x 50,000Lb (A3790) for longitudinal cutting of coil metal into strips of required width up to 9mm metal thickness Year of Manufacture: 2002 Make: HJ ENG,KOREA Raw Material: HR Coil Tensile Strength: Max. 50Kg/mm2 Yield Strength: Max. 30Kg/mm2 Coil Thickness: Min. 1.2mm ~ Max. 9.5mmT Coil Width: Min. 400mm ~ Max. 1,650mm Coil Weight: Max. 25,000Kg Coil Inside Diameter: 508mm Coil Outside Diameter: Min. ∅1,000mm ~ Max. ∅2,000mm LINE DATA Line Speed: Max. 150/80m/min Threading Speed: Max. 20m/min Slitting System: Pull & Drive Cutting by DC Power Control Slitting Width: Min. 40mm ~ Max. 1,300mm Slitting Number: Max. 30Cuts x 29Strips Pass Line Height: 900mm Line Threading Direction: Left To Right Coil Car With Coil Skid Uncoiler Coil Peeler Coil Opener Three(3) Bending Roll No.1 Pinch Roll Crop Shear with Guide Table Si ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 progr ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for si ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...