trabalho de chapa metálica usadas para venda

CONTROLS  PLC SIEMENS S5 115 U FEEDSTOCK TUBE  external diameter min.: 18 mm  external diameter max.: 127 mm  length min.: 3000 mm  lenght max.: 12000 mmModernized:1996 pipe length increased from 8.5 to 12 meters2000 cross chain added on the rightmin. base length of hexagonal bundles: 150 mmmax. base length of hexagonal bundles: 350 mmmax. bundle weight: 4'000 kgmax. tube weight: 30 kg/mincl. scale BUSCH EMWincl. data recording station BUSCH 875

Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible. ... mais informação

FEEDSTOCK TUBE  external diameter min.: 22 mm  external diameter max.: 140 mm  wall thickness min.: 1 mm  wall thickness max.: 14 mm  length min.: 4500 mm  lenght max.: 12500 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM- Replacement demagnetization Nukem- Replacement inspection electronics

Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible. ... mais informação

FEEDSTOCK TUBE  external diameter min.: 38 mm  external diameter max.: 130 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 550 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 100 m/min  pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter:  22 mmmax. drawing rod / pointed end length: 230 mmmin ...

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible. ... mais informação

TECHNICAL SPECIFICATION  Max. diameter of tube: 65 mm  Max. wall thickness: 2 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 5400 mm  space requirements -front/back-: 1550 mm  total height: 1500 mm  total weight approx.: 6500 kg+ 8-axis CNC pipe and wire bender+ CNC controlled feeder with pneumatic grippers+ separate servo drives for  A-axis:  rotation unit 35 mm  B-axis:  bending heand  C-axis:  feeder  D-axis: &nb sp;mandrel device  L-axis:  slide rail  P-axis:  chucking device  V-axis:  counter holder  Y-axis:  bending  Z-axis: & nbsp;bending head up/downFeedi ...

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

STRIP-FEEDER  sheet width max.: 210 mm  sheet thickness max.: 6 mmStrip feed unit (without servo) for GKP or MFA 160TStrip thickness: 6 mmStrip width: 210mm.It is recommended to use:DYNABOX 45 MEDIUM gearboxServo motor BECKHOFF AM8543-0E20Resolution 0.1mm ... mais informação

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

STRIP-FEEDER  sheet width max.: 250 mm  sheet thickness max.: 10 mmStrip feed unit (without servo) for GKP or MFA 250TStrip thickness: 10 mmStrip width: 250mm.It is recommended to use:DYNABOX 90 MEDIUM gearboxServo motor BECKHOFF AM8062-0L20Resolution 0.1mm ... mais informação

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm ... mais informação

CONTROLS  PLC OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 4 mm  coil weight max.: 10.5 to  feedstock transport direction: right to left COIL CHAIR  coil weight max.: 10.5 to  stroke: 750 mmDECOILER  design: single reel   sheet width max.: 500 mm  sheet width (min): 150 mm  coil weight max.: 10.5 to  max. diameter of coil: 2020 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 20 m/minCROP SHEAR  sheet thickness max.: 4 mm  working width max.: 530 mm  stroke rate (max.): 20 /minLEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 150 mm  sheet thickness max.: 4 mm  sheet thic ...

There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm.  ... mais informação

CONTROLS  PLC SIEMENS S7-400 FEEDSTOCK TUBE  external diameter min.: 22 mm  external diameter max.: 90 mm  length min.: 6000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 17.5 mm  external diameter max.: 80 mm  length min.: 7000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 1000 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 67.5 m/min  main drive power: 800 kWModernized:2011 new drawbar mouth2019 new collar bearing, draw bench chain and gearbox2021 new front benchPulling capacity+ 1-fold: 500kN, no short-term overload+ 2-fold: 1000kN, no short-term overload+ 3-fold: 1000kN, short-term overload 1300kN+ RohrbremseAttachments:+ tube brakemax. drawing rod / poin ...

CONTROLS  PLC SIEMENS S7 FEEDSTOCK TUBE  external diameter min.: 30 mm  external diameter max.: 120 mm  length min.: 3000 mm  lenght max.: 7500 mmPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 8800 mmCHARACTERISTICS DRAWING MACHINE  force: 450 kN  drawing length max.: 8800 mm  number of parallel trains / strands max.: 1   speed max.: 100 m/min  drive system -drawing machine-: chain Function: Semi-automatic (pull chain runs forwards, front bench can be rotated)Products: Round tubes, precision tubes, cardan shafts, squaresmax. drawing rod / pointed end diameter: 80 mmmin. drawing rod / pointed end diameter: 25 mmmax. drawing rod / pointed end length: 220 mmmin. drawing rod / pointed end length: 170 mmmumber of drawing jaws: min. 1 jaw and 1 reserve jawdrawing ...

CONTROLS  PLC SIEMENS S7 300 FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 30 mm  length min.: 250 mm  lenght max.: 700 mmSystem consists of:+ COMPINA A2.19153 handling system, year 2000+ MAE M-AH 6 automatic pipe straightening machine, year 2012+ Bühlmann (system construction), year 2000

CONTROLS  PLC SIEMENS S5 System consists of:+ MAE M-AH 4RH automatic straightening machine, year 1999+ Bühlmann Tube End Processing Station+ W. Müller blow-out device, year 2003max. straightening force: 40 kNmax. width between centers: 750 mmcenter height: 160 mm ... mais informação

CHARACTERISTICS STRETCH-STRAIGHTENING  force: 500 kN  Working length: 13000 mm  center height: 250 mm  stroke: 1000 mmmax. stretching length: 13'000 mmmax. stretching length:  3'000 mmjaw width: 160 mmjaw opening: 0-100 mmTorque: 600 NmRotation angle: +/- 90 degreesRotation speed standard: 1 rpmRotation speed fine: 0.25 rpmStretching speed: 10.8 mm/secRapid speed in working direction: 106 mm/secRapid speed in return for releasing: 93 mm/secToothed rack pitch: 250 mmJaw confirmation: 5-6 kgf/cm2 (pneumatic)Mandrel confirmation: 5-6 kgf/cm2 (pneumatic)

FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 110 mm  length min.: 400 mm  lenght max.: 1700 mmPRESS FORCES  total force (nominal): 40 toSystem consists of:+ WICK handling system, YoM 2012+ ABB IRB 6650S-90/3.9 handling robot, YoM 2012+ MAE M-AH 6 automatic pipe straightening machine, YoM 2012