trabalho de chapa metálica usadas para venda

Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation. ... mais informação

Working width: 2000mm, weight: 1.65t. ... mais informação

Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible. ... mais informação

Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible. ... mais informação

CONTROLS  PLC SIEMENS S7 300 Main spindle DIN 55022 size 11Crosshead spindle DIN 55022 size 8Drive power main spindle 30.7 KWDrive power hydraulics 33.5 KWMain spindle speed 350 - 1000/minWorkpiece diameter max. 650 mmCrosshead stroke 300 mmEjector stroke 80 mmCrosshead contact force 400 kN

Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible. ... mais informação

CONTROLS  PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 350 mm  sheet thickness max.: 10 mm  coil weight max.: 3 to  feedstock transport direction: left to right DECOILER  design: single reel   sheet width max.: 350 mm  sheet width (min): 80 mm  coil weight max.: 3 to  sheet thickness max.: 12 mm  max. diameter of coil: 1500 mm  mandrel expansion range from: 470 mm  mandrel expansion range up to: 530 mmLEVELLER UNIT  sheet thickness max.: 10 mm  number of leveller rolls: 5   diameter of leveller rolls: 100 mm  number of infeed-/outfeed rolls: 2   diameter of feed rolls: 100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzLine consisting  ...

Max. punching force: 240kN, working area: 1250-2500x550-1100mm, weight: 3.5t, available die diameter round: 3.1/ 4.1/ 4.2/ 5.2/ 6.5/ 8.2/ 10/ 11/ 12/ 13/ 16/ 17mm, longitudinal: 9x16/ 9x20mm, with documentation, an inspection is possible. ... mais informação

CONTROLS  PLC SIEMENS S5 115 U OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 350 mm  sheet thickness max.: 8 mm  coil weight max.: 4 to  feed velocity max.: 10 m/min  feedstock transport direction: left to right DECOILER  design: single reel   sheet width max.: 350 mm  coil weight max.: 4 to  max. diameter of coil: 1500 mm  mandrel expansion range from: 370 mm  mandrel expansion range up to: 530 mm  feed velocity max.: 10 m/minLEVELLER UNIT  sheet width max.: 350 mm  sheet thickness max.: 8 mm  number of leveller rolls: 21   diameter of leveller rolls: 50 mm  number of infeed-/outfeed rolls: 2   diameter of feed rolls: 120 mm  feed velocity max.: 10 m/minELECTRICAL SPECIFICATIONS& ...

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

FEEDSTOCK TUBE  external diameter min.: 22 mm  external diameter max.: 140 mm  wall thickness min.: 1 mm  wall thickness max.: 14 mm  length min.: 4500 mm  lenght max.: 12500 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM- Replacement demagnetization Nukem- Replacement inspection electronics

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. ... mais informação

FEEDSTOCK TUBE  external diameter min.: 38 mm  external diameter max.: 130 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE  force: 550 kN  drawing length max.: 13500 mm  number of parallel trains / strands max.: 3   speed max.: 100 m/min  pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter:  22 mmmax. drawing rod / pointed end length: 230 mmmin ...

Working width: 2040mm, max. sheet thickness: 4mm, weight: 1.8t, an inspection is possible. ... mais informação

FEEDSTOCK TUBE  external diameter min.: 60 mm  external diameter max.: 180 mm  length min.: 3000 mm  lenght max.: 10000 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 50 mm  external diameter max.: 168 mm  length min.: 4000 mm  lenght max.: 12500 mmCHARACTERISTICS DRAWING MACHINE  force: 2000 kN  drawing length max.: 12500 mm  number of parallel trains / strands max.: 1   speed max.: 40 m/min  etching device: yes Function: Automatic (towing carriage moving forwards and backwards, front bench horizontal)Products: Round tubes, precision tubes, cardan shaftsmax. drawing rod / pointed end diameter: 120 mmmin. drawing rod / pointed end diameter:  33 mmmax. drawing rod / pointed end length: 240 mmmin. drawing rod / pointed end length: 200 mmDrawing dia ...

Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 90 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- Ultrasonic system incl. digitization- test process Krautkrämer and measuring devices- Ultrasonic measuring device- Length differences >500 mm Sorting out Krautkrämer- Förster Defectomat continuous spool- Replacement mix-up test Krautkrämer

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

CONTROLS  PLC SIEMENS FEEDSTOCK STEEL STRIP  sheet width max.: 450 mm  sheet width min.: 90 mm  sheet thickness max.: 13 mm  sheet thickness min.: 2 mm  exterior coil diameter max.: 1900 mm  exterior coil diameter min.: 1100 mm  internal coil diameter max.: 760 mm  internal coil diameter min.: 610 mmPRODUCT (PROFILE, TUBE)  external diameter min.: 30 mm  external diameter max.: 140 mm  wall thickness min.: 2 mm  wall thickness max.: 12 mm  length min.: 4000 mm  lenght max.: 10000 mmLINE CHARACTERISTICS  Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min  feedstock transport direction: left to right Line consists of:- Strip prepara ...

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible. ... mais informação