máquinas de soldagem usadas para venda

Inv. Num. : 6619 Type: SONIX 0510i – H Producer: YUDO-STAR Created: 2012 Parameters: Axis X: 2500 mm Axis Y: 660 mm Z axis: 1000 mm Number of axles: 3 pieces Load capacity in the 3rd axis: 8 kg Equipment: 2x Vacuum Touch screen  ... mais informação

Inv. Num. : 6133 Type: PW 75/5 Producer: PROFIWELD Created: 2015 Parameters: Connection voltage: 480 V Power: 75 kVA Pressure: 0.6 MPa Cooling water flow: 12 l/min Frequency: 50/60 Hz  ... mais informação

Inv. Num. : 6854 Type: HTL 2500 Producer: EG Created: 2014 Parameters: Load capacity: 2500 kg Equipment: Connecting frame (column spacing 4200 mm)  ... mais informação

Inv. Num. : 6855 Type: MA 1900 Producer: Motoman Created: 2012 Parameters: Operating hours: 2200 h The workstation consists of the following parts: Motoman MA 1900 Robot (DX 100 Controller) Source: Lorch Saprom Speed Pulse S8 Tbi Welding Torch GUDEL track - type TMF-1/4000 - with a carriage for a barrel with welding wire 2x fixed table with dimensions 2000x1500 mm and a load capacity of 650 kg Horizontal positioner WESTAX WXH-150 (load capacity 1500 kg) 3x internal automatic workstation doors 3x external telescopic doors 3x SICK safety scanners Automatic cooker hood 2x manually hinged hood Superior control system WESTAX RCU 50 TBI JetStream Automatic Welding Torch Cleaner Positioning frame in HOBES for the storage of fixtures Fencing of the robot workstation

Inv. Num. : 7291 Type: Romat 410 Producer: Cloos Created: 2007 Parameters: Control system: Rotrol II Welding machine: MC3R 553 Workstation with one track: 10 m  ... mais informação

Inv. Num. : 7236 Type: AX 21 Producer: OTC Daihen Created: 2011 Parameters: Maximum load capacity: 6 kg Total power requirement: 2600 W Machine weight: 160 kg  ... mais informação

Inv. Num. : 7355 Type: Tetrix 352 AC/DC Producer: EMW Generated:- Parameters: Switch-on hours: 33 h Operating hours: 10 h Machine weight: 177 kg Height: 1250 mm Width: 375 mm Length: 780 mm  ... mais informação

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

Inv. Num. : 7188 Type: MA 1900 Producer: Motoman Created: 2011 Parameters: Maximum load capacity: 3 kg Robot travel: 1200 mm Welding process: MIG/MAG Equipment: Two WG-1500 positioners Lorch Welding Accessories JetStream Burner Cleaner SICK Safety Scanner Automatic internal screen Optical Safety Barrier Telescopic entrance door Mobile top hood

Inv. Num. : 7048 Type:- Producer: CLOOS Created: GO 2019 Parameters: Maximum load capacity: 500 kg Clamping length between flanges: 1500 mm  ... mais informação

Inv. Num. : 4741 Type: IR-SA 840 M Producer: Tiesse Created: 2006 Parameters: Table dimensions: 2410x930 mm Height: 3300 mm Width: 7000 mm Length: 5600 mm Equipment: Robot KAWASAKI FA 06 E C14 VK Robot Support MIG welding machines: Fronius Transpuls Sinergic 5000 Inverter TIG welding machines: Fronius Trans TIG 3000 DC Welding torch: ROBO 455 S S. Fronius FK4000 cooling unit Burner support: Binzel MOD CAT CPL-M Space for Fronius VR 1500 Euro 4R wire feeder Burner cleaning station Binzel MOD BRS-LC

Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station

Inv. Num. : 6191 Type: H 3000/1000/2 TIG 50 Producer: FANUC Created: 2021 Parameters: Parameter: Industrial robot FANUC ARC MATE 100iD 8L with a reach of 2032 mm 2x single-axis positioner with FANUC counter bearing, load capacity 1000 kg REER safety light barriers Welding source TIG Migatronic 500 A Welding bundle and torch ABICOR-BINZEL 500 A (water-cooled) TIG IT Software Automatic Path Correction Electrode search

Inv. Num. : 6623 Type: RUR Control Automati Producer: Pierce Created: 2006 Parameters: Control system: BURNY 10 LCD Working table length: 6000 mm Working table width: 1600 mm Plasma source: KJELLBERG HiFocus 130 Equipment: Flow Control Fine Focus Labeling device LeibInger JET 2 SE

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Operating hours: 12800 h Switch-on hours: 6000 h Number of axis: 6 horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg  ... mais informação

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

TECNA 4608N spot welding machine which was built in 2008 in Italy is used for precision welding of two sheets of steel or aluminium with a maximum thickness of 4 mm each. During the machining process, the electrodes heat the workpieces until they reach a plastic state in order to become one inseparable piece after cooling. The adjustment of arm reach and electrode stroke enables adaptation of the machine to the user’s individual production requirements. The 4608N resistance welding machine is equipped with a state-of-the-art TECNA TE90 Mark II microprocessor controller, designed to ensure a smooth and uninterrupted welding process. The control system enables the programming of 12 different process parameters and control of the SCR thyristor, responsible for regulating the welding current. The offered TECNA spot and projection welding machine also comes with, among others, a set of e ...

SPIRO CSTW 2D HG 1500 seam welding machine built in Switzerland in 2008, is designed for welding workpieces made of, among others, stainless steel or galvanised steel that are overlapped. The completed seam requires no additional sealing, cleaning or painting, and the channels are perfectly tight along the entire length of the workpiece. The versatile CTSW-2D HG welding machine uses welding rolers to precisely and accurately join materials, making it ideal for a variety of industrial production applications. Technical data of the SPIRO CSTW 2D HG 1500 welding machine - machinable materials: stainless steel, galvanised steel, black steel, tubes - welding length (seam): 60-1524 mm - maximum workpiece diameter: 1000 mm - minimum workpiece diameter: 10 mm - maximum workpiece thickness: 1.25 mm - minimum workpiece thickness: 0.3 mm - maximum welding speed: 12 m/min - seam overlap:  ...

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...