máquinas de soldagem usadas para venda

Ideal PGS typ.140-12 Mesh Welder Mounted In Enclosed Wire Cage Safety Structure, Grid housing Adjustable welding cylinder 12 pieces Welding force 10 KN, with control Welding panel, welding programs Machine fencing area dimensions 7.600 x 5.800 x 2000 mm Weight cca 5 ton typ.140-12 Mesh Welder Max. Usable width 1 = 1400mm Cross wire diameter: 2.00-8.00 mm Rated power at 50% ED 63kVa Connection power kVa165 Mounted In Enclosed Wire Cage Year of manufacture 1995 Including complete safety fencing area

Point Welding Machine - Dalex - SL16-1 - Series No.:118813458 - Control: MPS-1036 - Built: c. 1995 - Electric foot switches - 4 - Operating modes - Rated power b.50% ED-16 kVA - max. Welding power 50 kVA  ... mais informação

; ready for immediate use  ... mais informação

Mesh Welding Machine Width: 1200 mm Length: 2000 mm Suitable for: Industrial products Consist of: -double magazine -line wire magazine of 2000 mm  ... mais informação

Technical data: -Welding current 505 A 35% ED 433 A 60% ED 385 A 100% ED -Welding current 6 coarse steps + 6 fine levels adjustable - welding current adjustable from 40 A / 16 V to 505 A / 39.3 V - digital amp + voltmeter -separate stroke of wire feed case - 4 roll wire feed Steplessly adjustable - 2 + 4 stroke â regulation -E - welding equipment - hose water cooled approximately 6 YDS -Ground cable -Pressure reducer -Intermediate package machine - wire feed speed approx. 8 m - connection 400 V / 50 Hz 50 A -Space requirement approx. B 520 x H 1400 X 1000 mm -Weight approx. 170 kg

380 Volt2860 Rpm300 m2 / h; ready for immediate use  ... mais informação

weight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm ... mais informação

Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg

Esab UXD - P 2500 Control NCE 2901 x Plasma: Kjellberg PA S 40 cut up to 30mm1 x Autogen SupportWorking area: 2500mm x 3500mmIncluding suction machine has two-sided drive and is very well maintained. commissioning on request; ready for immediate use  ... mais informação

; ready for immediate use  ... mais informação

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request ... mais informação

Esab CXD 3000 PWorking range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mmBurning table 2 x 6m inclusiveWithout burning tables , without filter systemassembly and commissioning on request; ready for use  ... mais informação

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage plant 1,20mx1,03x ...

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB ... mais informação

CNC plasma cutting systemworking range: 1500 x 3000mmOTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use  ... mais informação

 ... mais informação

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

Ideal CSR Typ. 201 - 21 wire mesh production line CSR Project Jig welding machine Year of manufacture 1996 Switch / control cabinet kVa125 Made in Germany Control: W/Siemens Handheld Computer Control Mounted In Enclosed Wire Cage Safety Structure The coordinate welding machine CSR 201 is used for resisting point welding of sheet metal and wire products in stencils: Work-piece dimensions: Length max.1800 mm Width max. 750 mm Nldw7 Height max. 200 mm X-axis for driving the welding unit according to the work piece length, with a base frame, hardened liner guides, serrated toothed rack system and servomotor with incremental encoder, travel max. 1800mm programmable, max. Travel speed 1500 mm / s Positioning accuracy +/- 0.2mm Y axis for driving the welding unit according to work piece width, with hardened linear guides, rack system and rotary servo motor with incremental ...

output: 30 Kvaweight of the machine ca.: 0,15 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

rated capacity: 16,0 kVA 50% EDwelding power: 35,0 kVA max.contact pressure capacity: 240 daNthroat: 230 mm0: 380 Velectrode stroke: 15 - 85 mmweight: 116 kgrange L-W-H: 1000 x 400 x 1100 mmFurnishing:- Spot welding machine from a training workshop- Welding control TE 90 Mark IIWelding control TE 90 is a microprocessor control for single-phaseresistance welding machines. The welding controller has the task ofTo control machine elements, especially the SCR, which controls the adjustment of the control the welding current. The duty cycle that the TE 90 performs isdescribed using the programming parameters.- SCR synchronous control, welding time regulation by phase cut- Simple programming via 4 buttons- Current rise and pulses- Single point and automatic- Secondary current compensation for welding dirty metal sheets and wires- Welding time lock optimizes current draw from the mains- Soleno ...