subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
Grinder for copper separation Dry model SM200 Ecorobust ... mais informação
Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.
Processing: both sides, dry, max. workpiece width: 1300mm, material thickness: 0.8-100mm, max. passage width: 1300mm, length: 3100mm, width: 2100mm, height: 2400mm, weight: 5.6t, total operating hours/automatic: 11,002/ 5566h, including 2x 2000mm auxiliary conveyors and extensive documentation, without extraction system or abrasives, on-site inspection is possible.
There are five identical machines available, an inspection is possible. ... mais informação
Max. bending diameter: 30mm, an inspection is possible. ... mais informação
Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.
Length: 1000mm, width: 1200mm, height: 2500mm, the machine has not been run for some time, an inspection is possible. ... mais informação
Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled. ... mais informação
Max. hydraulic pressure: 200bar, hydraulic oil capacity: 400l, length: 2000mm, width: 1500mm, height: 1000mm, with operating instructions, wiring diagram and installation instructions, on-site inspection is possible. ... mais informação
Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. ... mais informação
The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible. ... mais informação
X-travel: 570mm, y-travel: 320mm, z-travel: 265mm, B-travel: +/-130°, C-travel: 360°, max. workpiece dimensions: 150x150x100mm, connected load: 40kVA, controls: Bosch Rexroth MTX, weight: 16t. ... mais informação
Two Bihler reels are available, without documentation, an inspection is possible. ... mais informação
Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible. ... mais informação
There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min. ... mais informação
Bear weight: 300kg, lifting speed: 130/min, with documentation, an on-site inspection is possible. ... mais informação
Bear weight: 400kg, lifting speed: 125/min, connected load: 30kW, with documentation, an on-site inspection is possible. ... mais informação
Bear weight: 500kg, lifting speed: 120/min, connected load: 45kW, with documentation, the scraper is defective, the dovetail is broken, an on-site inspection is possible. ... mais informação
Bear weight: 1t, max. impact energy: 27kJ, stroke rate: 95/min, max. stroke: 950mm, working height: 800mm, drop face dimensions: 365x180mm, connected load: 75kW, length: 4125mm, width: 1500mm, height: 3662mm, weight: 20t, with documentation, on-site inspection is possible. ... mais informação
Max. coil diameter: 2000mm, max. coil width: 1500mm, max. coil weight: 5t, max. tensile force: 550kg, winding speed: 0-20m/min, connected load: 4kW, with pressure roller system and documentation, suitable for the production of stainless steel pipes, an inspection is possible. ... mais informação