subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
Description: machine number: 575158 control: Multipulse travels: X-axis: 550 mm Y-axis: 850 mm Z-axis: 450 mm table dimensions: 800 x 1100 mm max. table load: 2000 kg x-motion: 550 mm, y-motion: 850 mm, z-motion: 450 mm, control: Multipulse, table surface area l x w : 800x1100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,650 x 2,800 mm
Description: Natural gas feeder Efficiency 9.9 kWh/m³ Consumption 35 m³/h Maximum temperature 800°C Maximum coil weight 3 tons Maximum coil diameter 1400 mm Maximum coil height 2000 mm Power 350 kW PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 2 exceptional transports 2 normal trucksApprox. Onsite Dimension. (l x w x h): 12,000 x 6,000 x 4,000 mm, weight approx.: 25,000 kg
Description: The Rösler RHBE 15/20 is an overhead conveyor blast machine that is suitable for the surface treatment of heavy or large-volume workpieces. , General information Type: RHBE 15/20 Machine number: 42825/08 With air extraction and material recycling Technical specifications Machine type: Overhead conveyor blast machine Turbines: Gamma 300G Hook load: 500 kg Door opening approx.: 1500 x 2000 mm workpiece dimensions L/W/H: 2000x1500 mm, charge weight: approx. 500 kg, total power requirement: 62 kW, Approx. Onsite Dimension. (l x w x h): 6,000 x 5,000 x 6,000 mm, weight approx.: 5,000 kg
Description: • Screw compressor • Serial number 2272168 • Motor power 43 KW-2960 rpm • Maximum working pressure 7.50 bar • Air flow 6280 l/minApprox. Onsite Dimension. (l x w x h): 1,600 x 950 x 1,800 mm, weight approx.: 900 kg ... mais informação
Description: Belt width: 600 mm 3x heating zones Temperature per zone: max. 1130°C Voltage: 3x 400V Ampere: 72A Total power 164 KVA SIEMENS control with Simatic HMI Touchscreen energy type: Aardgas, net power: 9x 400 V, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 25,000 x 2,000 x 2,700 mm
Description: • Screw compressor • Serial number 378506 • Motor power 15 KW • Total operating hours according to the counter 13991Approx. Onsite Dimension. (l x w x h): 730 x 880 x 1,750 mm, weight approx.: 350 kg ... mais informação
Description: .Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... mais informação
Description: .Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... mais informação
Description: Powder Coating Line 1.- Degreasing - Phosphating by Spraying Dimensions: 2500 x 2000 x 800 mm Capacity 3.75 m3 Spray treatment tunnel dimensions: 4750 x 1500 x 1725 mm 2.- Water Spray Washing Dimensions: 1500 x 2000 x 800 mm Capacity: 2.25 m3 Tunnel dimensions: 3250 x 1500 x 1725 mm 3.- Powder painting booth Dimensions: 4160 x 1560 x 895 mm Overall dimensions of the enclosure: 4160 x 1560 x 1560 x 1545 mm Painting equipment consisting of: 4 automatic AT3 guns and 1 manual gun. 5 control modules 4.- Polymerisation and humidity drying oven Working temperature 450 ºC Dimensions: 12740 x 5540 x 3000 mm 5.- Combustion chamber BT100 DSG burner 3 centrifugal fans with a flow rate of 22000 m3/h  ,Approx. Onsite Dimension. (l x w x h): 7,200 x 13,500 x 2,500 mm, weight approx.: 25,000 kg
faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.
x-travel:400 mmy-travel:300 mmz-travel:500 mmtable clamping surface::400 x 300 mmtable load:50 kgsemi-automatic operated:LASERSOFT 3D laser capacity:100 Wtotal power requirement:27 kVAweight of the machine ca.:2,5 tdimensions of the machine ca.:3 x 3,5 x 2,8 mCNC engraving/texturing/labeling/contouring-laser maschine,approx. 9.000h "machine on", approx. 5.500h "laser on"
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW ... mais informação
grinding length:850/1000 mmgrinding width:375 mmworkpiece height:375 mmClamping area:1550x370 mmtotal power requirement:9 kWspace requirements approx. LxWxH:4,80 x 2,25 x 2,40 mTotal weight, approx.:4300 kgmax. workpiece weight:350 kgUsed Surface grinding machine, manufactured EFA type AMBASSADOR 4/2 VA IZ, Baujar 1975Machine with automatic feed in all 3 axes.Machine cleaned and tested by qualified technician Functionality tested.Surface grinding machine in perfect condition, ready for production.Accessories:- Electric - magnetic - table size 400x200mm, with a straight pole- demagnetising devise- wheel dresser mounted laterally on the grinding wheel, manually operated- wet grinding- 1 piece grinding wheel flange- 1 set of machine set up devises- Technical documentation in German- With diaform - deviceFor more information, see the Appendix.Payment: 100% before loading the machineWarranty: ...
honing diameter:41 mmstroke:800 mmweight:15.000 kgfloor space required (w/o switchgear cabinet):4x2x5 mnumber of spindles:2 Vertical honing machine from current OEM lineBore honing machine from wheel production Honing diameter: 41mm serial part4 layer honing tool Machine condition: o used and intact; fully functional; Serial system ratchet wheel 4 o Parts quality OK o 2 spindle vertical honing machine o 4-layer honing tool - Piece counter: 960,000 - The machine was used in three-shift operation Overview of accessories: o Control panel o Tool/ clamping device o oil panso Decentralized coolant system (2.5x1.5x1m), hydraulic unit (1.5x1x1m) & control cabinet
workpiece diameter:360 mmcentre distance:600 mmturning speed range - stepless:2 - 1.550 U/mintransmission ratio:2 tailstock travel:800 mmpower maindrive:33 kW:160 kVAweight of the machine ca.:17 tprecision flow-forming machine with 2 rolls,slides with 2 roller under 90°,central lubrication,max. round blank dia. 380mm,bed length 3.670mmm,mainspindle speeds infinitely variable,hydr. roller drive, swivellable roller bearings,coolant device 800 l,only approx. 4.300 working hours
x-travel:800 mmy-travel:500 mmz-travel:420 mmtotal power requirement:7,5 kWweight of the machine ca.:3 tdimensions of the machine ca.:3,5x3x2,2 m ... mais informação
Sulzer METCO Plasma Coating Plant for cylinder block and cylinder head, YOM 2002New price: ? 16-20 mio ... mais informação
max. workpiece diameter:160 mmmin. workpiece diameter:20 mmworkpiece length:3300 mmSawn round material sections are clamped using prismatic hydraulic clamps left and right, and in one operation the two front surfaces can be milled to length and machined with a center hole and/or thread. ... mais informação
grinding diameter:630 mmgrinding length:2000 mmcentre height:320 mmmax. workpiece weight:2500 kgswing diameter in open bench rest:40-150 mmtaper in tailstock:6 MKtable swivelabel +/-:6°30' °work piece spindle speed:8-50, 50-315 (2 Bereiche) U/mingrinding wheel speed:33 m/secoutput of wheelhead motor:15 kWworkpiece-spindlehead motor:3,0 kWtotal power requirement:31 kWweight of the machine ca.:12400 kgopen type steady rest:2 (schwer) Stücksteady fixed:2 Stückgrinding wheel flange:2 Stücktechnical documentation:in deutscher Sprache 40 % advance payment, by order confirmation60 % before loading the machinewarranty:12 monthone general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D.Our general overhauling includes:regrinding and scraping of all guide ways in ...