subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
Load capacity: 100kg, weight 1760kg, layer use: 1-layer. EURO standard baskets can be used: Length/width/height: 600mm/400mm/288mm. Spray cleaning and flood cleaning possible. ... mais informação
Laboratory Chamber Furnace with controller, T.max °C: 1200, 3.7kW, Inside dimension in mm (wxdxh) 250 x 400 x 250 equals 25.0 liters. ... mais informação
Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible. ... mais informação
Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible. ... mais informação
Vacuum chamber volume: 0.62m³, weight: 2800kg, cooling water requirement: 700l/h. On-site inspection is possible. ... mais informação
It is still in working order, but nothing has been produced with it for a long time. On-site inspection is possible. ... mais informação
Expected particle size: 0.5-50µm, dust consistency: dry and free-flowing. Operating temperature: ... mais informação
Working diameter: 1000mm, working height: 450mm, max. workpiece weight: 900kg, noise level: 78dBA, connected load: 7.34kW, length: 3000mm, width: 3000mm, height: 3500mm, weight: 2.045t, operating hours: 9372h, including documentation, cabin with turntable, manganese lining, blast wheel (radial armouring, ceiling armouring, throwing blades in HM design), sieve, bucket elevator, separator, extraction system cyclone, filter (new filter cartridges installed), control panel electrical system, has been regularly maintained, on-site inspection is possible.
Two identical chamber furnaces are available. T. max.: 1280°C, internal dimensions: 350 x 350 x 250mm, volume: 30l. External dimensions: 1040 x 1030 x 1340mm, weight: 210kg. Heating capacity: 15kW, electrical connection: 3-phase. ... mais informação
Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.
An oil coolant system including an HSS recirculating cooling system is available. Total capacity: 5800 l, flow rate emulsion/oil: 1000/500 l/min, max. delivery pressure: 150 bar. Pumped liquid temperature: 80 °C, flow rate suction line/pressure line: 1m/s / 3m/s. Dimensions: Length 3200 mm, width 2120 mm, height 2735 mm. Accessories: Water cooler HSS type: DKB1000. Regularly serviced, with documentation. On-site inspection is possible.
An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible. ... mais informação
Partial cleaning machine used in the production of machines. Max. Current consumption: 134.7A, total connected load: 78.4kW. Additional descaling system, 4 trolleys for loading and 2 spare pumps. Documentation available. ... mais informação
There are 2 identical Mörz PM soundproof cabins available. ... mais informação
Diameter: 250mm, wire thicknesses: 0.20mm/0.27mm/0.35mm/0.38mm/0.50, grit size (RASALON): 80/120/180/320/500. Brush roller: Brush speed: 1500/3000rpm. Dimensions X/Y/Z: 700mm/440mm/1200mm. Including workpiece support and prism guide. Documentation available. ... mais informação
Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.
Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of work bowl: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filling weight: approx. 4200kg, control: AgieVision. Documentation available.
There are 10 identical SIHN ring piece rotary transfer machines available. Parts: Rotary indexing table, clamping device, clamping cylinder, vertical and horizontal drilling units, feed unit, vibration conveyor, hydraulic unit, housing, control system, various pneumatic assemblies. Power: 25kW-38kW, working pressure: approx. 6bar, weight: approx. 4500kg-6500kg. The rotary transfer machines are only sold as a package. Individual machines cannot be sold separately.
Volume flow: 4.44m³/h, fan rotational speed: 1400/min, motor power: 2x 1.5kW, without accessories, spare parts or documentation. ... mais informação