outras máquinas para trabalhar o metal usadas para venda

Rotor weight: max. 50kg, rotor diameter: max. 720mm, rotor length: max. 600mm, spindle: S100, motor speed: 2500 rpm. Weight: 850kg. ... mais informação

Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available.

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: gas   temperature min.: 420 °C  temperature max.: 930 °C  throughput, capacity: 10000 kg/hThroughput per hour+ 420-680 degrees Celsius: 10'000kg+ 830-930 degrees Celsius:  7'150kg

FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 170 mmMACHINE CHARACTERISTICS SWAGING  force: 1000 kN  stroke rate (max.): 560 /minPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 12000 mmcomplete line including hammer and tube handlingmin. end diameter: 12 mmmax. end diameter: 110 mmlength of the conical tool part: 190 mm (for hammering)work feed speed: 0-100 mm/secrapid speed: 200 mm/secproduction output: approx. 260 pcs/h (application dependent)

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 105 mm  wall thickness min.: 0.8 mm  length min.: 20 mmPRESS FORCES  total force (nominal): 200 to ... mais informação

ELECTRICAL SPECIFICATIONS  total power consumption: 57 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 4900 mm  space requirements -front/back-: 2600 mm  total height: 2600 mm  total weight approx.: 2600 kgWashing medium: solvent-freebasket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mmuseable volume       800 x  780 x  900 mmnet weight of batch            ;     200 kgAttachments:Dosing unit DOSANTEC A763-168Mbuffer tank 100 ltrWaste water tank 75 ltrrotating spraying cross from toprotating spraying cross from bottomDrying device (circulating air) wi ...

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: electric   temperature min.: 420 °C  temperature max.: 930 °C  throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included

CONTROLS  PLC SIEMENS S7-1200 FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 170 mmMACHINE CHARACTERISTICS SWAGING  force: 1000 kN  stroke rate (max.): 560 /minPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 12000 mmcomplete line including hammer and tube handlingmin. end diameter: 12 mmmax. end diameter: 110 mmlength of the conical tool part: 190 mm (for hammering)work feed speed: 0-100 mm/secrapid speed: 200 mm/secproduction output: approx. 260 pcs/h

CONTROLS  CNC controls AGIE WORKING RANGE -WIRE CUTTING-  worpiece length max.: 750 mm  worpiece width (max): 550 mm  X-axis travel: 350 mm  Y-axis travel: 250 mm  U-axis travel: 70 mm  V-axis travel: 70 mmTABLE  workpiece load (max): 450 kgWIRE SYSTEM  wire diameter (min): 0.2 mm  wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2000 mm  space requirements -front/back-: 1700 mm  total height: 2200 mm  total weight approx.: 2500 kg

CONTROLS  PLC SIEMENS FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 35 mm  length min.: 70 mm  lenght max.: 250 mmThe system is designed for hardening, drying and oiling cam tubes.The bunkers are loaded and unloaded manually. The system automatically removes the cam tubes from the loading bunker and places them automatically in the unloading bunker. The cycle time depends on various parameters, such as workpiece length, workpiece diameter, number of hardening zones, lengths of the hardening zones and the hardening depth.The complete system consists of:1 x base frame with collecting tray for the quenching medium 1 x lifting beam for simultaneous infeed and outfeed of the cam tubes 1 x horizontal slide with servo geared motor for holding the HF oscillating circuit transformer for 4-fold inductor and 2x 4-fold shower ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 60 toSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 11 mm  stroke max.: 60 mm  variable speed: yes   stroke rate (min.): 60 /min  stroke rate (max.): 240 /minATTACHMENTS (PRESSES)  strip feeder: yes

CONTROLS  CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in usePayload 500 kgUp to 1200 cycles/hourVertical reach 3024 mmHorizontal reach 3159 mmWeight 2300 kg 2 units available ... mais informação

Precision air chuck Ø240mm (Type 9-500-6QC)Technology: APCRepeatability approx. 0.0015Jaw stroke 12mmconcentricity: approx. 0.005 mmbase jaw DRM 134-182mm- as new unused air chuckEquipment:- Jaw Ø 174 - 182mmUse of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.

CONTROLS  PLC SIEMENS S5 FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 38 mm  wall thickness min.: 2 mm  wall thickness max.: 4 mm  length min.: 52 mm  lenght max.: 200 mmSystem consists of:+ BÜHLMANN (system construction), YoM 1997+ BACHMANN ABB robot cell, YoM 2014+ BROTHER TC-S2DN-0 CNC machining center, YoM 2012

FEEDSTOCK TUBE  length min.: 4000 mm  lenght max.: 12000 mmMACHINE CHARACTERISTICS SWAGING  force: 2000 kN  stroke rate (max.): 740 /minPRODUCT (PROFILE, TUBE)  external diameter min.: 30 mm  external diameter max.: 127 mm  wall thickness min.: 1.5 mm  wall thickness max.: 11 mm  length min.: 4000 mm  lenght max.: 12000 mmcomplete line including hammer and tube handlinghammering length: 180-300 mmhammering time: approx. 15 secondstotal hammering time: approx. 21 seconds (incl. loading and unloading)production capacity: approx. 170 pcs/hinclusive:+ pipe adjustage GFU ZS-2000 kN+ various GFU hammer jaws (30-110 mm)

CONTROLS  PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 9000 mm  width: 350 mmELECTRICAL SPECIFICATIONS  total power consumption: 278 kW  mains power supply: 450 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 10300 mm  space requirements -front/back-: 2500 mm  total height: 2650 mm  total weight approx.: 9000 kg3-lane system with 350 mm usable width eachProcess sequence:Stage 1:         Cleaning (70 degrees)Stage 2,3,4,5:   Rinsing (65, 60, 60, 55 degrees)Stage 6:         Hot air drying (65 degrees)Oil separator:   continuous oil discharge Heating:         e ...

CONTROLS  PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 7000 mm  width: 1040 mmELECTRICAL SPECIFICATIONS  total power consumption: 145 kW  mains power supply: 267 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 7400 mm  space requirements -front/back-: 2350 mm  total height: 2300 mm  total weight approx.: 8000 kgContinuous conveyor belt 1040 mm wide, separated into 3 linesProcess:Stage 1:       Cleaning (65 degrees)Stage 2,3,4:   Rinsing (65, 60, 60 degrees)Stage 5:       Heating air drying (60 degrees)Oil separator: continuous oil discharge Heating:       electrical heating Conveyor belt: 1x wire  ...

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1250 mm  total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each

 ... mais informação

CONTROLS  PLC SIEMENS S7 300 FEEDSTOCK TUBE  external diameter min.: 59 mm  external diameter max.: 100 mm  wall thickness min.: 1.5 mm  wall thickness max.: 3 mm  length min.: 3000 mm  lenght max.: 12000 mmPRODUCT (PROFILE, TUBE)  length min.: 400 mm  lenght max.: 1500 mmSystem consists of:+ ASMAG pipe cutting system+ HU 32-WS-HU3-SP250 forming system+ ABB stacking stationmax. bundle weight: 5'000 kgmax. bundle diameter: 800 mmABB robot working area: 4500 x 4100 x 2500 mm