prensas usadas para venda

Description: Internal height min. 200 mm, max. 1350 mm Width min. 200 mm, max. 2500 mm Without CE certificate Voltage 400 V Pressure according to technical documentation up to 2000 kpApprox. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 2,500 mm, weight approx.: 2,000 kg ... mais informação

Description: OTT veneer stack press with gold anodized panels Press area 2,500 mm x 1,300 mmApprox. Onsite Dimension. (l x w x h): 2.800 x 1.500 x 2.000 mm, weight approx.: 3,500 kg ... mais informação

Description: • Semi-automatic pneumatic carcase press • Entrance table length 1650 mm with belt width 600 mm • Maximum workpiece dimensions to press approx. 2200 x 600 x 1200 mm • Minimum pressing workpiece length approx. 300 mm • Minimum pressing workpiece height approx. 300 mm • 4 pneumatic horizontal cylinders and 4 vertical ones • Vertical pressure from 0 up to 1900 kg • Horizontal pressure from 0 up to 600 kg • Feed speed from 12 m/min • Adjustable clamping timeApprox. Onsite Dimension. (l x w x h): 5,600 x 1,200 x 2,610 mm, weight approx.: 1,800 kg

Description: • Carcase press • Pneumatically driven • 3 x 2 vertical pressing cylinders • 2 x 2 horizontal pressing cylinders • Maximum workpiece dimensions approx. 2600 x 600 x 1400 mmApprox. Onsite Dimension. (l x w x h): 3,500 x 1,050 x 2,350 mm, weight approx.: 800 kg ... mais informação

Description: • Heated veneer press • Serial number A1430106 • Total installed power 16 KW • Working surface 3000 x 1300 mm • Maximum opening approx. 400 mm • Total force 70 T • 6 pressure cylinders diameter approx. 70 mm, hydraulic motor power 1.50 KW-1420 rpm • Pressure and pressing temperature are adjustable • Heating of the plates by electric resistancesApprox. Onsite Dimension. (l x w x h): 3,460 x 1,700 x 1,900 mm, weight approx.: 3,500 kg

Description: • Veneer press • Working surface 2500 x 1300 mm • Maximum opening approx. 430 mm • 4 pressure cylinders diameter approx. 90 mm, hydraulic motor power 1.47 KW-1450 rpmApprox. Onsite Dimension. (l x w x h): 2,920 x 1,570 x 2,100 mm, weight approx.: 3,200 kg ... mais informação

Description: Manufacturer: Grecon Dimter Press for massive wood panels Machine type: ProfiPress 2500HF-3 Serial number: 2456.32, year 2005 Timber data: Type of timber: softwood or hardwood Infeed length (min/max): 400/2500mm Parallel width (min/max): 30/170mm Parallel height (min/max): 8/60 mm, for soft wood 8/40 mm, for hard wood Dimensions: cca 9.000 x 7.300 x H2.000 mm Supply of power: 400V, 50Hz, 92 kW, Weight: 15.000 kg The line consists of: 1. Transversal infeed station with gluing unit 2. Press 2500 x 1300mm with HF Generator 40 kw, Cavallo 3. Splitter saw 4. Transport table Attention! The line may be dismantled after 15.07.2024Approx. Onsite Dimension. (l x w x h): 9,000 x 7,300 x 2,000 mm, weight approx.: 15,000 kg

Description: maximum panel length: 3000 mm working height : 1000 mm panel thickness 25 - 90 mm number of working units 6 pcs maximum weight allowed / work unit 150 kg number of clamps / working unit 8 pcs clamping mode of the clamps pneumatic number of pneumatic motors 1 pc (Ingersoll 3840 P) top panel pressing mode pneumatic number of vertical pressing pistons 1 piece compressed air pressure 1/2 - 6 bar electric motor 400V, 50 Hz, 1,5 kW rotating mode of working units: electric Approx. Onsite Dimension. (l x w x h): 4,000 x 3,400 x 3,000 mm, weight approx.: 1,500 kg

Glue star or rotating gluing press Hess Rotor for gluing wood to form panels with 8 pressing surfaces (1,250 mm each). Incl. glue application machine and lots of inlay wood with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4

Description: Briquetting Machine Serial number 164 Power 7.5 kW Pump capacity 34 cm3 Tank Ø 1000 x 900 mm CE availableserial number: 164, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,900 x 1,600 mm, weight approx.: 800 kg ... mais informação

Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, weight approx.: 4,000 kg

Briquetting Press Briquette Press Spänex Type SHB 50 K1 CE Built in 1986 Hydraulic briquette press With shavings container K1 Briquette mould 8-sided Briquette size 70 mm x 120 mm Capacity 50 kg/h Drive motor 5.5 kW Hours 35665 Wood moisture minimum 8% - maximum 20% Weight of the press 650 kg Chip container size 3m³ Chip hopper with agitator and feed screw Dimensions set-up 1500 mm x 1500 mm, height 2250 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Due to their density, briquettes have a volume reduction of up to 90% in the material and thus an extremely high energy and thus calorific value 2.5 kg of ...

pressing area: 3000mm x 1350mm; opening: 400mm; heating: electric; plate surface: ALU - eloxiert; Emergency stop switch: yes; pressure: 115t; number of cylinder: 6; electricity: 57A; machine length: 3500 mm; machine width: 1500mm; weight: 5500kg;  ... mais informação

Veneer press Fabr. Bütfering Slabs size 2.3 x 1.3 m Electric 4 cylinders diameter 120 mm Hydraulic with safety leash  ... mais informação

Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

Code: 0238 Brand: ORMAMACCHINE Model: 30/6 Hydraulic cold press for panels, furniture, customised furnishings, kitchens, composite materials, insulation materials, aluminium and various materials Platen dimensions mm 3000 x 1200 Opening width mm 450 N° 6 cylinders Motor power Hp 1,5 Dismountable press Overall dimensions mm 3300 x 1500 x 2000 h Weight kg 1500

Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition ... mais informação

Plate dimensions: 250 x 120 cmDaylight opening: 400 mmtotal connected load: 20 kWElectro-hydraulic veneer press withAutomatic switching and automatic opening.Pressing area: 250 x 125 cmPressing pressure: 100 tonsCylinders: 6 piecesmax. opening: 40 cmWeight: approx. 3,000 kg- ELKOM combination heating plates with gold anodized coating (Temperature settings can be controlled separately at the top and bottom)- EMERGENCY STOP contact strip under the press table- Cable emergency stop deviceThe machine has been technically tested and is in a ready-to-use condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Productivity 400/500 kg/h Pump motor 18.5 kW Briquette diameter 70 mm Operating pressure 200 bar Hopper capacity of 9.4 m3 (diameter 2000 mm - height 3000 mm) Refrigeratorserial number: 0956, briquet diameter: 70 mm, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 2,000 kg

SPECIFICATIONS: Working width: 3000 mm Working height: 2000 mm 03 Presses for vertical capping 02 Presses for horizontal capping Hydraulic machine  ... mais informação