prensas usadas para venda

Koller sleeves punched for CPM 22-2.5  ... mais informação

Graf Koller sleeves punched for CPM 16-2.5 Pelletier press  ... mais informação

Graf Kollerhülsen Geriffelt to CPM Pelletpress  ... mais informação

Koller sleeves Geriffelt for CPM 22-2.5  ... mais informação

In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...

Emergency stop line, control by button, steel plates, oil boiler heating system, receptacle for mylar foil---------- Technical Data ---------- pressing area: 3,000 x 1,300 mm, max. opening height: 400 mm, number of cylinders: 6 pieces, weight: 4,400 kg, dimensions: 3,700 x 1,800 x 2,100 ... mais informação

Emergency stop strip, control by button, gold anodized plates---------- Technical Data ---------- pressing area: 2,500 x 1,250 mm, max. opening height: 400 mm, Number of cylinders: 4 piecesSold as is, without technical inspection ... mais informação

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm ... mais informação

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... mais informação

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... mais informação

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... mais informação

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... mais informação

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... mais informação

Description: Vacuum membrane press with heating bonnet 200L vacuum vessel Vacuum output -0.85 bar 400Vserial number: F11011L, pressing width: 1,540 mm, pressing length: 3,880 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,900 x 1,300 mm, weight approx.: 450 kg ... mais informação

Description: Briquetting Machine Serial number 164 Power 7.5 kW Pump capacity 34 cm3 Tank Ø 1000 x 900 mm CE availableserial number: 164, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,900 x 1,600 mm, weight approx.: 800 kg ... mais informação

Description: serial number:  ,EUR/031/16 control: SIEMENS Simatic  , power: 5.5 kW max. working dimensions: ,2500 x 1500 x 650 mm min. working dimensions: ,250 x 200 x 650 mm length of entrance strip: 3000 mm press length: 4900 mm length of the output strip: 2500 mm connection power: 5.5 kW power of air connection: 6 bar serial number: EUR/031/16, control: SIEMENS Simatic, Approx. Onsite Dimension. (l x w x h): 5,000 x 3,000 x 2,000 mm, weight approx.: 2,500 kg

Description: Manufacturer: Grecon Dimter Press for massive wood panels Machine type: ProfiPress 2500HF-3 Serial number: 2456.32, year 2005 Timber data: Type of timber: softwood or hardwood Infeed length (min/max): 400/2500mm Parallel width (min/max): 30/170mm Parallel height (min/max): 8/60 mm, for soft wood 8/40 mm, for hard wood Dimensions: cca 9.000 x 7.300 x H2.000 mm Supply of power: 400V, 50Hz, 92 kW, Weight: 15.000 kg The line consists of: 1. Transversal infeed station with gluing unit 2. Press 2500 x 1300mm with HF Generator 40 kw, Cavallo 3. Splitter saw 4. Transport table Attention! The line may be dismantled after 15.07.2024Approx. Onsite Dimension. (l x w x h): 9,000 x 7,300 x 2,000 mm, weight approx.: 15,000 kg

Description: maximum panel length: 3000 mm working height : 1000 mm panel thickness 25 - 90 mm number of working units 6 pcs maximum weight allowed / work unit 150 kg number of clamps / working unit 8 pcs clamping mode of the clamps pneumatic number of pneumatic motors 1 pc (Ingersoll 3840 P) top panel pressing mode pneumatic number of vertical pressing pistons 1 piece compressed air pressure 1/2 - 6 bar electric motor 400V, 50 Hz, 1,5 kW rotating mode of working units: electric Approx. Onsite Dimension. (l x w x h): 4,000 x 3,400 x 3,000 mm, weight approx.: 1,500 kg

Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than:  ...

Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, weight approx.: 4,000 kg