equipamento periférico (por exemplo aquecimento, transporte, secagem) usadas para venda

Description: Roll width: 1530 mm Total floor area: approximately 50 x 10 metersApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... mais informação

21-32-..NH Lifting table HIW3000 (new) Type 8536730 Electric – hydraulic tables. Lifting capacity: 3000 kg. Min. height: 190 mm. Lifting height: 1020 mm. Table area: 1500 x 2800 mm. Lifting speed: 30 mm/s. Made in Denmark Transport dimensions 2800x1500x300 mm Weigth: 350 kg. Price 2300 Eur (EXW Jonava, Lithuania)

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)

Suction nozzle diameter: 120 mm or 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.1 kW; Machine height: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg; ... mais informação

Suction nozzle diameter: 150 mm or 2 x 120 mm; Nominal flow rate: 3000 m³/h; Chip bag volume: 2 x 1.3 m³; Filter cleaning: manual; Motor power: 1.5 kW; Dimensions: Weight: ... mais informação

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover  ... mais informação

Fan for chip transport  ... mais informação

Shredding chippers for scrap wood Low-speed with moving floor Rotor width 9th 600 mm 18.5kw motor  ... mais informação

curved conveyor beltbend 90?width carpet 500 mmtotal width 700 mmmin/max height 890/990 mmlength inner size 2800 mmengine 0.55 kW ... mais informação

hydraulische lifting tabledimensions of the table (single): 1100 x 1450 mmheight min/max: 400 mm / 2000 mmmaximum charge: 1000 kg ... mais informação

Workpiece dimensions up to approx. 5 m. length, 250 mm widthSliding blocks for possible loading with singulatorTransverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x4 perpendicular stop rollers4 non-driven feed rollers1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/sWorking height 70 cmElectrical cabinet not included

SPECIFICATIONS: Flow rate m3/h: 3,500 Number of bags: 3 - Ø 470 mm Number of filter bags: 24 - Ø 230 mm, height 2000 mm Installed capacity: KW 4.0  ... mais informação

Extraction system Venti-Oelde Year: 1995 Filter flow rate 42000 m3/h Ventilators: 1 x 30 KW / 24,000 m3/h 1 x 15 KW / 5000 m3/h Trough Conveyor + Fan Return air  ... mais informação

Suction nozzle diameter: 200mm; Nominal flow rate: 2780 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 1580 pa; Filter area: 13 m²; Filter cleaning: pneumatic; Motor power: 3 kW; Machine length: 2000 mm; Machine width: 800 mm; Machine height: 2200 mm; Weight: 240; The dust extractor is suitable for vacuuming dry wood dust and dry wood chips at individual dust sources. This also appliesfor oak and beech wood dust. Furthermore, metallic, ceramic, organic dusts of dust explosion class St1 and St2can be extracted.If the dust extractor is properly connected to a woodworking machine with a dust source (e.g. circular saw, milling machine, planer, belt sander) and operated in accordance with the regulations", the necessary extraction performance and separation qualityâ is always guaranteed.When vacuuming a “dust-tested†woodworking mach ...

Gebr. 1-Bag Suction FIELDS F3B YOC 1993 Motor power 2.2 kW (380V) Rated current: 4.3 A mobile Extraction connection: 120 + 80 mm (ideal for sliding table saw) The suction was tightly clamped. There is no on/off switch Dimensions: L 115 cm W: 55 cm H: 210 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

FIELDS AF-22 YOC 2003 Motor power: 2.2 kW (400V) Rated current: 5.3 A 2-Bag Suction 1 filter element Suction connection: 160 mm Wall incl. various pipe components (as shown) only complete - no retail sale without lattice box Dimensions according to manufacturer's specifications: 1,300 x 580 x 2,150 mm

Outdoor extraction system Number of collective bags: 2 Diameter of bulk bags 600mm Number of filters 32 Filter diameter 200mm Filter Flakers 4kw main motor Can be used indoors and outdoors The filter has legs Dimensions 205x110x360cmH  ... mais informação

Outdoor extraction system 4kw Number of collective bags: 3 Diameter of bulk bags 500mm Number of filters: 24 Filter diameter 250mm Filter Flakers 4kw main motor Can be used indoors and outdoors Dimensions 200x130x400cmH  ... mais informação

Drying kiln of capacity of cu.m 80 INTERNAL DIMENSIONS 9000 x 7000 x h net 4100 mm nr. 6 Fans INVERTER for ventilation control Nominal range of each fan 30.000 m3/h Water heating fluid 90° C – At12 Humidification system by Nozzles at high nebulizing power Expelling Chimneys Control at 6 wood Probes Deflectors for air canalization