equipamento periférico (por exemplo aquecimento, transporte, secagem) usadas para venda

Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW  ... mais informação

Code: 0265 Brand: ISVE Model: ESC JUNIOR/5 - CE Standard Vacuum dryer for wood with electric heating - CE Standard Capacity m/cubic 0,7 Electric heating Machine body in stainless steel N° 5 heating plates mm 480 x 5000 x 10 - 422W/each Wood pile size mm 5000 x 480 x 400 h Installed power: N° 1 oil vacuum pump with motor Kw 0,75 - Heating elements Kw 3,75 Door opening by means of N° 2 pneumatic cylinders Electric control panel Instruction manual Overall dimensions mm 5900 x 1000 x 1200 h Weight kg 1000

Chip extraction unit model ASA 2 with 2 extraction filters and 2 filling bags Motor 2.2 KW Air flow 2300 cbm/h Year of construction 2011 with complete pipe distribution  ... mais informação

Room extraction dust with extension unit and Octopus 20 workbench Further data on request or see photos  ... mais informação

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989  ... mais informação

1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW ... mais informação

Vibrating screen, motor approx. 5kW  ... mais informação

Centrifugal chemical-resistant plastic Casing and impeller of fan are suitable chemical-resistant plastic and aggressive media in the process exhaust air. Manufacturer Hürner spark GmbH 35325 Mücke Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air flow / volume 2166 / 1900 m³/h Power 1.50 KW, 1619/1420 RPM. Pressure difference PA 1287/990 Conrad Meiseberg home electric motor Type 90 L-4 DR No. 304987 3.4/6 A, 50 Hz, 1.5 KW, 230/400 V Star/Delta ISO F, IP55 1420 RPM., cos phi 0.82

Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used  ... mais informação

Capacity max Kg: 400 Total connection KW: 1.1  ... mais informação

Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture

Sawn timber sorting and packaging line 2.90-5.20m Sequence description Dispensed Home & Dispensers Side goods are collected separately by means of conveyor belts into two stacks on top of each other. The storage tanks are emptied via the separation conveyor to the board feeder and board turner. At the Zuteil-u. The operator is located at the turning station, who is responsible for monitoring and assessing the quality of the boards. All boards are inspected from two sides and then electronically measured, this is done according to length, width, thickness and thickness. Quality in transverse transport. About the Wende-u. The cut goods are sent to the sorting conveyor, after which they are sorted into the 30 boxes At the end, stray sorting conveyors are transported away by conveyor belt. The belt boxes are emptied by lowering and disengaging the belts. Subsequently, the respectiv ...

VSA 48 EL Feed apparatus VSA 48 EL max. extension: 1050 mm 4 feed rollers Plastic cover of feed rollers Metal gearbox with hardened gears 8 speed levels Engine power: 0.75 kW 400 V Right and left run Weight: 70 kg G&STÜ-5115501  ... mais informação

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303  ... mais informação

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6  ... mais informação

21-32-..NH Lifting table HIW3000 (new) Type 8536730 Electric – hydraulic tables. Lifting capacity: 3000 kg. Min. height: 190 mm. Lifting height: 1020 mm. Table area: 1500 x 2800 mm. Lifting speed: 30 mm/s. Made in Denmark Transport dimensions 2800x1500x300 mm Weigth: 350 kg. Price 2300 Eur (EXW Jonava, Lithuania)

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)