Fabricante:
(Categoria: 301)
Engel injection moulding machine old ... mais informação
Description: serial numberr 177900 Clamping force 400 KN Clearance between columns: 270 mm x 270 mm Board dimensions: 446 mm x 446 mm Mold size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 30 mm Injection volume / Injection weight: 70 ccm / 59 grams PS Injection pressure: 1550 bar Engine: 11 kW Heaters: 4.5 kW Operating voltage 400 V, 50 Hz Contrtol voltage 230 V, 50 Hz Total connected load 40,1 kW Control voltage 24 VDC Dimension 2656 x 1850 x 1476 mm Weight 2180 kg Approx. Onsite Dimension. (l x w x h): 2,565 x 1,850 x 1,476 mm, weight approx.: 2,180 kg
Ejection stroke: 35mm, weight: 700kg. ... mais informação
INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar
Description: Umbaumöglichkeit horizontal/vertikal für Spritzeinheit Spannkraft 350 kNApprox. Onsite Dimension. (l x w x h): 2,700 x 1,500 x 2,500 mm, weight approx.: 1,800 kg ... mais informação
BATTENFELD 400/150 S-KS /⦠/ 12/80 injection molding machine Year of prod. 1981 The machine is fully operational, not used for 5 years, ready for transport ... mais informação
with spare screw, high-pressure hose and various spare parts - see pictures ... mais informação
Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... mais informação
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation. ... mais informação
clamping force: 700 kNinjection volume: 103 cm³screw diameter: 30 mmplaten size: 432 x 310 mmclosing stroke: 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
Used injection moulding machine made by Arburg model Allrounder 221-75-350, new 1984. Closing force: 350 kN/tonne. Injection force: 77 kN/tonne. Operating voltage: 380V, 50Hz. Heating: 3.4 kW. Pump motor: 7.5 kW. Total load: 10.9 kW. ... mais informação
Injection molding machine BM-BIRAGHI model HORIZON 4370/650, Italy, 1985 Clamping force - 650 tons. Injection volume - 2000 cm3. The maximum injection pressure is 150 bar. Distance between columns 800x800mm. New screw pair f.90 mm. ... mais informação
Connected load: 17.71kW. ... mais informação
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 50,409h. ... mais informação
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 56,736h. ... mais informação
Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... mais informação
Article number: 27-06-304 Manufacturer: Arburg Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 2700x1200x1800mm Weight: approx. 930kg Closing side: Clamping force: approx. 250kN Holm dimension hxv: ca.221x0mm Plate size hxv: approx. 342x250mm Installation height min: ca.150mm Installation height max: approx. 300mm Plate spacing max: approx. 500mm Aperture travel: approx. 200mm Spray side: Screw diameter: approx. 22mm Displacement: approx. 38cc Injection pressure: approx. 1500bar Other accessories on request Price and other technical data on request
Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (=standard) mm M12-M16 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.