máquinas injetoras usadas para venda

Krauss Maffei hose pouring machine type: KM 650-4350 BM, with Robo control: MC 3 construction year: In 1993 Schliesseinheit Schliesskraft t: 650 opening ways mm: In 1750 cross-beam measure mm: 1000 x 900 installation heights min / max. mm: 600 record size: 1430 x 1350 hose unity snail diameter mm: 85 hose weights gr: In 1965 hose volumes cm?: 2195 hose pressure cash: In 1993 mass and weights dimensions LxBxH m: 12.5 x 2.50 x 2, 3 machine weights kg: 35.000/12.000 other Neureder robot

Krauss Maffei injection moulding machine Type: KM 800 / 4350 BM, with Neureder robot control: MC 3 year: 1993 Clamping unit Clamping force t 800 Gap mm: 1245 Holm dimension mm: 1000 x 900 min/max height mm: 705 /. Plate size: 990 x 1380 injection unit Screw diameter mm: 85 Injection weight gr: 1965 Injection volume cm m³: 1820 Spray pressure bar: 2185 Dimensions and weights Machine weight kg: 38,000/12,000 Other 2 core pull, Neureder robot system

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Air valve / air valve: x 1

Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live  ...

Brand: Arburg Model: 370 M 800-225 Tonnage: 80 Year: 1993 Column passage: 370x370 Screw diameter: 40 Calculated injection volume: 188 Min / max mold thickness: 250 Robot interface: Euromap 800-225 ... mais informação

Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine ... mais informação

1993 model husky xl 300 pet injection engine (full revision) 1997 model Piovan raw material dryer 1999 model Fasti mold drier Robot and conveyor Some pet preform moulds ( New ) Full automatic, in excellent condition ... mais informação

 ... mais informação

Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 520 x520 Installation height min/max mm: 350 Plate size: 820 x 820 Spraying unit Screw diameter mm: 820 x 820 Spray weight gr: 440 Spray volume cm3: 510 Spray pressure bar: 1910 Dimensions and weights Dimensions LxWxH m: 5.5 x 1.3 Machine Weight Kg: 10000 Other Battery Euromap 12

Clamping force kN 2400 Mould thickness mm 460-800 Opening stroke mm 0-510 Distance between tie-bars V/H mm/mm 630/630 Stroke, injection unit mm 550 Nozzle contact force KN 78 Screw diameter mm 60 Injection pressure bar 1534 Max. injection volume cm3 565 ø centring ring mm 160 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M20 Robot Yes

SANDRETTO series 8 430/150 with SEF 100 Clamping force: 150 T Distance between columns: 460 x 460 mm Min / max mold thickness: 155 - 560 mm Opening stroke: 500 mm Tray dimensions: 690 x 690 mm Injectable volume: 286 cm3 Material pressure: 1500 bars Screw diameter: 45 mm total installed power 29 kW Weight: 7000 kg Dimensions: 6.36 x 2.08 x 1.50 m Euromap 12 robot interface core top dosage

Manufacturer Engel Type ES7000/1100 CC100 Control CC 100 Built in 1994 Closing unit Closing force t 1100 Opening path mm 1400 Holm size mm 1420 x 1170 Installation height min/max mm 600/1200 Plate size 1990 x 1740 Spraying unit Screw diameter mm 105 Spray volume cm3 3850 Spray weight gr 3740 Spray pressure bar 1650 Dimensions and weights Dimensions LxWxH m 12.6 x 3.7 x 2.6 Machine weight Kg 89000 Other robot ENGEL ERC 73/1-ST Core pulling: 2 pcs Euromap 12

Molding machine of Mag Type: Ergotech 25-80 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 25 Gap mm: 350 Holm dimension mm: 280 x 280 min/max height mm: 105 /. Plate size: 390 x 390 Injection unit Screw diameter mm: Gr 22 injection weight: 37 Injection volume cm m³: 42 Injection pressure bar: 2061 Dimensions and weights Dimensions Lxwxh m: 3 x 1.05 x 1.9 machine weight kg: 1550

emag injection molding machine Type: Ergotech 80-310 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 80 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 3.9 x 1.4 x 1.9 machine weight kg: 3600

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working

B&A REF: 8983 TON: 380 SHOT WEIGHT: 1310G SCREW DIAMETER: 75MM STROKE VOLUME: 1370CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1140MM EJECTOR STROKE: 240MM CONTROLS: SEF 100 AIR VALVES: 1 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

INJECTION UNIT Screw diameter: 45mm Calculated injection volume: 323 cm³ Length / diameter ratio: 20 L / D Material pressure: 1973 bar CLOSING UNIT Closing force: 1500 kN Mini / Max mold thickness: 250/560 mm Maximum distance between trays: 1060 mm Passage between columns: 500 x 500 mm Tray size: 790 x 790 mm GENERAL Oil quantity: 500 l. Dimension: (WxHxD) 5.2 x 2.1 x 1.5m. Weight: Kg 6700 EQUIPMENT CL4 command 1 core 1 blow gun

DEMAG Ergotech compact 1500/610 Order: NC4 Closing force: 150 T - 1500 KN Distance between columns: 500 x 500 mm Tray dimensions: 790 x 790 mm Min / max mold thickness: 250 - 560 mm Injectable volume: 323 cm3 Material pressure: 1973 bars Screw diameter: 45 mm L/D ratio: 20 Weight: 6700 kg Dimensions: 5.20 x 2.10 x 1.50 m

Used Battenfeld for sale, it has broblem with frequency converter the pump motor is not working as it should Battenfeld BK-T 2750/1000 Injection moulding machine ... mais informação

SANDRETTO Serie 8 sef 100 injection molding machine otto 200T E612 Sef 100 series Screw D50 / 392 cm3 / 1560 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Installed power: 34.8 kW Dimensions: 6.36 x 2.14 x 1.84 Weight: 8800 kg Euromap 12 robot interface Auxiliary cores Top dosage