máquinas injetoras usadas para venda

Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.

Description: serial number 160352 Clamping Force: 1000 kN Distance Betw. Tie-Bars: 270 mm x 270 mm Platen Size: 545 mm x 545 mm Mould Hight: min 250 mm Opening Stroke: 500 mm Max. Open Daylight: 750 mm Screw Diameter: 35 mm / 30 mm Injection Volume: 121 gram PS / 89 gram PS Injection Prresure: 1855 bar / 2350 bar Motor Power: 18,5 kW Heating Power: 5,4 kW Operating voltage 420 V, 50 Hz Heating 5,5 kW Pump motor 18,5 kW Total load 24,0 kW Dimension 4300 x 1500 x 1800 mm Weight 3850kg Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 1,800 mm, weight approx.: 3,850 kg

Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.

BMB Model MC 350 PL Year of manufacture 1994 Origin Italy Closing Unit Closing Force 3500 Kn (350T) Inner width between columns (hxv) 900x625 mm Mold opening way 700 mm Min. Mold height 200 mm Pusher distance 300 mm Pusher forward force 100 Kn Injection Unit Screw diameter 70mm L / D ratio 24 Volume 1450 Cm3 Weight (PS) 1300 g Pump power 55 kw Heater power 32.5 kw Weight ca. 16.5 t Width x Height 1850x2450 mm

 ... mais informação

Description bi-injection machine vertical injection with 20mm diameter screw hoist capacity 200kg height from the ground 3800mm ... mais informação

Description working hours: 80000 ... mais informação

Sole injector Brand: Maingroup, model: SP345. 3-post extruder, year: 1994, monochrome, spindle: 66 mm Ø. ¿Listo para empezar? ¡Contacta con nosotros directamente! Envíanos un mensaje por WhatsApp al (+34) 647 590 257 o un email a info@gester.es para asesoría personalizada.  ... mais informação

Closing unit Clamping force t: 200 Opening path mm: 750 Holm size mm: 560 x560 Installation height min/max mm: 300 Plate size: 830 x830 Spraying unit Screw diameter mm: 60 Spray weight gr: 540 Spray volume cm3: 636 Spray pressure bar: 1575 Dimensions and weights Dimensions LxWxH m: 6.6 x 1.8 x 2.1 Machine Weight Kg: 10200 Other Battery Euromap12

SANDRETTO series 8 790-200 SEF100 Clamping force: 200 T Distance between columns: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Tray dimensions 770 x 770 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000 kg Dimensions: 7.26 x 2.30 x 1.58 m

Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12

Manufacturer Arburg Type 270 M 350-90 1,800 h runhour Control Multronica Built in 1995 Operating hours h 1800 Closing unit Closing force t 35 Opening path mm max 325 Holm size mm 270 x 270 Installation height min/max mm 225/550 Plate size 400 x 400 Spraying unit Screw diameter mm 25 Spray volume cm3 49 Spray weight gr 40 Spray pressure bar 1860 Dimensions and weights Dimensions LxWxH m 3.7 x 1.75 x 1.95 Machine Weight Kg 1720 Other sprue picker

Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation height min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Dimensions and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820 Other

Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation height min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Dimensions and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820 Other

Manufacturer Engel Type 330-80 HL Control EC 88 Built in 1995 Closing unit Closing force t 80 Opening path mm 450 Holm size mm 710 x 420 Plate size 660 x 560 Spraying unit Screw diameter mm 35 Spray volume cm3 154 Spray weight gr 140 Spray pressure bar 1600/2200 Dimensions and weights Dimensions LxWxH m 4.2 x 1.3 x 2 Machine weight Kg 5300 Other Euromap 12

Manufacturer Battenfeld Model BK-T 1300 / 630 Year 1995 Machine is in good condition 130 Ton ... mais informação

DR. BOY 50M YEAR 1995 SCREW 32 mm 50 ton CLAMPING FORCE ... mais informação

1K 65 Tons Min Mould height - 260 Max Moul Height - 400 distance btw columns - 400 opening stroke 730 valve gates - 1 Max Shot Weight - 142 ... mais informação

Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the  ...

with Sepro robot - Distance between tie-bars (h x v): 640 x 625 mm - Screw diameter: 55 mm - Shot weight max: 595 g - Injection rate: 310 cm?/s - Injection pressure: 1.906 bar - Injection volume: 614 cm? - Screw speed: 318 rpm - Screw L/D ratio: 23,5 - Clamping force: 2.750 kN - Mould opening stroke max: 580 mm - Mould height max: 640 mm - Mould height min: 200 mm - Daylight between platens max: 1.220 mm - Platen size (h x v): 935 x 920 mm - Control: CINCINNATI MILACRON CAMAC 486 - Power: installed max: 32 kW - Dimensions (long x wide x high): 7.500 x 1.510 x 2.377 mm - Weight: 11.698 kg