máquinas injetoras usadas para venda

Arburg 320M 750-90 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 75 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Air valve x 1 It is possible to set the injection unit vertically It is possible to change the screw diameter for fi 20, 30, 35 mm Metrics: Weight: 2360 kg Length/Width/Height: 4.24x1.90x2.05 m Drive: Pumps/motor: 15 kW Heating capacity: 4.6 kW Total power: 19.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On reque ...

Arburg 420C 1000-350 Year of construction: 1995 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 100t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot Interface Hydraulic Core Pull X1 Metrics: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08m Drive: Pumps/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in � ...

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2020 bars CLOSING UNIT Closing force: 800 kN Opening stroke: 450 mm Mold thickness Mini / Max: 250 mm Max distance between tray: 700 mm Passage between columns: 400 x 400 mm Tray size: 580 x 590 mm GENERAL Heat output: 22 kW Total installed power: 30 kW Quantity of oil: 250 l. NC4 control Machine used exclusively in a clean room

Manufacturer Krauss Maffei Model KM 350-1650 B1 Year 1995 Located in Turkey Machine can be seen in working condition 350 Ton ... mais informação

KRAUSS MAFFEI 125 T injection press in good condition Reference: 125-460 C1 Closing unit: Closing force: 125 tonnes Opening stroke: 900 mm Distance between column: 470 x 470 mm Mold min. : 300mm Max mold: 600 mm Tray dimensions (h x v): 770 x 750 mm Injection unit Screw diameter: 40 mm Injectable weight: 195 g Injection pressure: 2112 bars Measurements and weights Dimensions: 4.5 x 1.5 x 2.2 m Machine weight: 4100 kg Euromap 12 robot interface

There are eight ARBURG Allrounder 220M available. ... mais informação

Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t. ... mais informação

Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t. ... mais informação

BOY 22D Injection moulding machine Year manufactured: 1995 The machine is in good condition but is in storage and used only lightly after it was overhauled before I perched it. ... mais informação

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm ... mais informação

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel ES 1350 275 HS Closing unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./max. mold height [mm] min 350 Maximum opening width [mm] 1200 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical and hydraulic equipment Rated power of the pump motor [kW] 37 Heater power [kW] 19.8 Dimensions and weight Net weight with control cabinet [t] 19

Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658 ... mais informação

Injection pressure: 2057bar, clamping force: 3500kN, heating output: 30.7kW, weight: 16.4t, operational hours counter: 62,600h. ... mais informação

Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools. ... mais informação

Hydraulic pressure: 210bar, weight: 3.1t. ... mais informação

This DEMAG Ergo-Tech 250-1450 injection moulding machine was manufactured in 1995. It comes equipped with handling capabilities, tailored for intricate and precise manufacturing processes. This machine represents a blend of durability and efficiency, making it a solid addition to any production line looking for versatile moulding solutions. The DEMAG Ergo-Tech 250-1450 we have for sale offers reliability and a robust build, ensuring longevity and consistent performance in demanding environments. For further details on this machine, please contact us.