extrusoras usadas para venda

Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW  ... mais informação

Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. ... mais informação

Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. ... mais informação

Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly. ... mais informação

Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated electrical control cabinet with temperature controllers and all connections, continuously operating screen changer type L-026 with two channels, granulating nozzle for 20 strands, stainless steel water bath with deflection rollers and cooling fan, dosing unit with hopper, (2) Double Screen 800/300 stainless steel with double screen chute, round perforation 8mm for downstream connection of a transport suction unit, monitor control, strand pelletiser GR 250, infinitely variable collection heating, single knife, inclined cut, pneumatically pressed feed roller, outlet with slide (3) Dry Air Dryer E200 with one fully insulated 1000l V2A vessel, drying throughput: 250kg/h, stationary unit, easy clean ...

Drive power: 110kW, with reversing Film Take-Off Kirion T 1300, Monoblow Head Kirion 120/300-1, further accessories and documentation. ... mais informação

PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible. ... mais informação

I sell a line for the production of products from VPS and VPS (Extruder, VFM, Recycling) BU In prefabricated working order. made in China, 2014 There is an opportunity to demonstrate the line operability. Equipment: 1) PS extrusion line (DY-PSP 105/120) LONGKOU DEYLI MACHINERY CO., LTD. Capacity 200kg / h. Sheet width 1040 mm Max. Power consumption 125 kW. Overall dimensions V3m / W1.5m / D7m / D7m 2) Automatic Forming and Cutting Machine (DY-1040) LONGKOU DEYLI MACHINERY CO., LTD Max. Power consumption 156KW. Capacity up to 21.6 thousand pieces / h. W3m / W3.5m / D18m 3) Complex for recycling recycled polystyrene (Recycle machine) model DY-180 + 120/100 LONGKOU DEYLI MACHINERY CO., LTD (Crusher, Extruder, Grinder, Granulator) Productivity 90kg / h. Max. Power consumption 65KW. W3m / W2m / D5m 4) Dosing gas pump 4D-100/50 2.2 kW HANGZHOU ZHIJIANG PETROCHEM ...

Thermoforming line for the production of OMV F-85 polystyrene plates, made in Italy, 2004, in operation no more than 2 years. The condition is almost new. The scheme of work is a closed technological cycle. Line composition: Extruder with a co-extruder D100 + D60 with a unit for mixing and dosing the material, calender unit, thermoforming machine F-85 with a system for stacking products, packaging machine, crushing unit, thermostats for calenders and thermal stamps, thermal stamp for dessert plates 167 mm 20 nests, thermal stamp plates flat 210 mm 12 nests with inserts for the production of plates 2x and 3x sectional. In working order.

Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...

Extruder for the production of three-layer LDPE film, German company Kifell. Capacity -150 kg/h. Foil thickness 0.03 - 0.2 mm. Width of upper rollers 1500 mm. Dolici double-sided winder 1230 mm. The width of the mouthpiece is 70 mm. Year of production 1985, in continuous production since 2010, available for viewing and testing in our company.

Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...

We sell lines 80/156, 65/132 and 55/110 for the production of WPC products (terrace boards, siding, fence boards, window sills, panels, logs, etc.) The equipment is installed at the enterprise, fully operational, and can be started. We will help with commissioning and training ... mais informação

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 new screws and 1 reconditioned barrel, Mounted: screws + barrel in very good conditions (380 kg/h), n.1 dosing unit with hopper, N.1 vacuum degassing pump, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, hydraulic pack, strand die (available with water ring pelletizer), stainless steel cooling bath with heat exchanging unit, air-blowing dryer, electric cabinet with air conditioning (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered reconditioned, CAPACITY: 400 kg/h

Sub-system consisting of extruder and rotating die head, / cooling ring with a diameter of 400mm. Extruder: RT 1651-1-100-30D Screw Ø: 100mm Year of Make: 1996 Drive power: 180kW Screw length: 30D Screw+Cylinder: Reiloy Bimetal Die head: reversing 400mm nozzle Ø Output capacity: 300 kg/h to 350 kg/h Max. output: more than 450 kg/h The extruder comes from the technical center of the company REIFENHÄUSER and was only in operation for a total of 12 years. Screw / barrel are in very good condition.

1 Screw Extruder for Sale Brand: Maquiplast Diameter: 80 mm Ø L/D ratio: 20 L/D Engine: 30 kW (40 hp) Variable Speed Drive: Delta For more details or to make an enquiry, please contact us.  ... mais informação

see pdf description  ... mais informação

See PDF  ... mais informação

Description Mannesmann Demag hoist Max load : 200 Kg chain length: 3 m Power strip length: 6 m Power supply: 400V Power: 0.2 kW ... mais informação

Description Hot print coders. ... mais informação