Fabricante:
(Categoria: 302)
x-travel: 3000 mmy-travel: 2500 mmz-travel: 1000 mmControl: Siemens type: 840 DFeed: 5-30.000 mm/minTable area: 2000x2170 mmtable load: 1500 Kg/m²T-slots: 22 H9distance between uprigths: 2500 mmspindle turning speed range: 6000 U/minspindle drive: 36 kWspindle taper: HSK 100Tool changer: 30 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 8x6,4x4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
engine output: 375 kWcubic capacity: 12809 ccmdriven kilometers: 225000 kmallowable maximum weight: 18/56 Tgear box: automatic size of tire: 385/65R22,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
GAMMA MECCANICA EXTRUDER, Material rigid HDPE + PP, LDPE, Nominal Output HDPE+PP 1.800 kg/h, LDPE+PP 1.400 kg/h, Screw diameter 250 mm 24 L/D, BDPLAST semi-automatic screenchanger (available with fully automatic screenchanger on request), Water ring Pelletizer Gamma Meccanica, Drying centrifuge Gamma Meccanica, vibrating screen, The line is offered AS IS or RECONDITIONED
Stock - No. 1665 1 Gebr. ERMAFA compounding line type E 90.2 - throughput up to 450 kg/h depending on material Built in 1987 consisting of: Extruder Twin Screw Ø 2 x 90 mm - 25 L/D Synchronous Segment screws and barrels, water-cooled Drive 75 kW DC , 1450 rpm. 2 x degassing zones, 1x vacuum pump Hydraulic screen changer screen - Ø 150 mm >> WITHOUT control / control cabinet, electrical diagrams for new control are provided by us ! SPECIAL PRICE Further extruders and compounding lines from the Wuppertal warehouse - ready for demonstration.
Model year 2005 Lorex-1000 HS, E105U ac motor with drive, 350kg/hr Including fibrilattion unit Complete with 144 nos lohia LTW 200 CM winders ... mais informação
GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...
Output: approx. 255 - 450 kg/h (manufacturer's information from brochures; depending on material and profile; DEGUMA assumes no liability for actual, product-specific output) Straight head on hinged flange, fastening via screws; NEW SEVA motor, new control system ... mais informação
Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice. ... mais informação
x-axis: 700 mmy-axis: 1.000 mmz-axis: 500 mmmax. table load: 900 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3D coordinate measuring machine- PC with software, various probes- Renishaw PH10MQSoftware: PC-DMIS Pro 3.7 Maintenance Release 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-axis: 600 mmy-axis: 300 mmz-axis: 200 mmmax. table load: 25 kgtotal power requirement: kWweight of the machine ca.: 40 kgdimensions of the machine ca.: m3D production measuring system15-inch monitor (mounted on a transport trolley)As good as new, only used 4-5 timesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3D Evo Composer 350 filament extruder, reviewed and ready to use. ... mais informação
Inv. Num. : 7186 Type: NE 7 Producer: WEBER Created: 1997 Parameters: Weight: 3200 kg ... mais informação
VARIOUS SIZES AVAILABLE, Example : for a 250 mm. screen Ø:, Single plate with 2 sliding breakers with radial holes 6,5 mm.diam. Screen diam.250 mm. Construction in steel on n.1 supporting wheeled cart Heating through 4 plate heaters W 3.750 V.240 each one Total power 23 Kw Hydraulic l power station 7,5 kw with control electrovalves, n.2 storage units Pump group externally positioned PTFE ring N.2 temperature controls on drawers N.2 temperature controls on bodies Max work temperature 260 °C Complete with all safety devices Control panel on hydraulic pack Pressure transducer User’s manuals, drawings CE, TYPE: Semi-automatic, non-stop
For LDPE MDPE and BIO Web width from 600 mm up to 1600 mm Throughput rate 100/160 kg/h depending on materials Max production speed 80 Min/max thickness 30/200 my (tolerance sigma 2 +/- 8% Extruder with screw diam. 65 mm. 30 L/D MELT control Oscillating die diam. 100-200-300 mm. gap 1,4 mm. Blow Up Ratio 1,5 – 4,5 high capacity cooling ring with inverter on electric fan 7,5 kw Calibrating basket 1.000 max diam. Gusseting units Pull off unit min/max width 600_1600 mm. Stretching rollers 1.800 mm wide Corona treatment Back to back winding station type BA 2/1.800 Max reel diam. 1000 mm. N.2 slit and seal units Supporting tower height approx 9,0 mt. Construction year 2003 Excellent conditions Mounted but disconnected
MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...
The machine was built in 2023 Only medical EVA was used. Production was made for trial purposes and the machine did not get tired. Can absorb EVA, PE, and many soft materials. ... mais informação