extrusoras usadas para venda

 ... mais informação

 ... mais informação

 ... mais informação

VARIOUS SIZES AVAILABLE, Example : for a 250 mm. screen Ø:, Single plate with 2 sliding breakers with radial holes 6,5 mm.diam. Screen diam.250 mm. Construction in steel on n.1 supporting wheeled cart Heating through 4 plate heaters W 3.750 V.240 each one Total power 23 Kw Hydraulic l power station 7,5 kw with control electrovalves, n.2 storage units Pump group externally positioned PTFE ring N.2 temperature controls on drawers N.2 temperature controls on bodies Max work temperature 260 °C Complete with all safety devices Control panel on hydraulic pack Pressure transducer User’s manuals, drawings CE, TYPE: Semi-automatic, non-stop

For LDPE MDPE and BIO Web width from 600 mm up to 1600 mm Throughput rate 100/160 kg/h depending on materials Max production speed 80 Min/max thickness 30/200 my (tolerance sigma 2 +/- 8% Extruder with screw diam. 65 mm. 30 L/D MELT control Oscillating die diam. 100-200-300 mm. gap 1,4 mm. Blow Up Ratio 1,5 – 4,5 high capacity cooling ring with inverter on electric fan 7,5 kw Calibrating basket 1.000 max diam. Gusseting units Pull off unit min/max width 600_1600 mm. Stretching rollers 1.800 mm wide Corona treatment Back to back winding station type BA 2/1.800 Max reel diam. 1000 mm. N.2 slit and seal units Supporting tower height approx 9,0 mt. Construction year 2003 Excellent conditions Mounted but disconnected

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

 ... mais informação

The machine was built in 2023 Only medical EVA was used. Production was made for trial purposes and the machine did not get tired. Can absorb EVA, PE, and many soft materials. ... mais informação

Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap  ... mais informação

used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available ... mais informação

Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time ... mais informação

A110 Twin-screw side feeder (ZS-B) The ZS-B allows fillers and additives or chopped glass fibres to be fed in from the side in powder and/or pellet form. The co-rotating screw shafts are largely self-wiping and pro-mote active conveying. The feeder can be attached to the twin-screw extruder in conjunc- tion with a connection housing at any point in the processing section where feeding of the above-mentioned materials makes sense. The ZS-B can be quickly installed or removed using quick-change devices on the screw barrel. The ZS-B is designed with a wheeled base frame; a flat and smooth installation surface is required for this. Sufficient spacemust also be provided for installation and removal, as well as for cleaning. The twin-screw side feeder consists of the following component parts: ● screw barrel ● 2 screw shafts with positive engagement ● frequency-controlled motor  ...

for HDPE LDPE PC PS ABS, nominal throughput rate 350-400 kg/h including:, loading belt, metal detector, Meccanoplastica Granulator 600 mm., n.3 + 2 knives 550 mm long, 37 kw drive, extraction vent buffer silo with agitators extraction screw, crammed feeder extruder with 105 mm screw diameter 36 L/D, vacuum degassing pump semi-automatic, non stop hydraulic screenchanger hydraulic pack water ring pelletizer drying centrifuge electric cabinet CE compliance The line is offered RECONDITIONED - see[how we recondition at Germanplast](https://www.germanplast.eu/pagine/photo-gallery)

 ... mais informação

TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)

Extruder 1 spindle Brand: Bandera, 80 Ø diám 25L/D, with two speeds, alternating current motor: 55 kw (75 hp) with variable speed drive. Two replacement spindles, one for rigid PVC and one for plasticized PVC. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

Year of issue: 2006 Length of injection molding machine, mm: 6900 Width of injection molding machine, mm: 1700 TPA height, mm: 2500 Clamping force, tons: 320 Weight, t: 12 Screw diameter, mm: 55 Injection volume, cm³: 1026 Productivity kg / hour (РС): 187 Drive, kW: 37 Heating, kW: 18.5 Slab size, mm: 1000 Slab size, mm: 1000 Between columns, mm: 660 Between columns, mm: 660 Fastening of clamps VNUTR cont., Mm: 280 Fastening of clamps VNESHN. cont., mm: 350 KRM plate travel, mm: 670 Package height min, mm: 240 Package height max, mm: 680 Full disclosure KRM, mm: 1350 D of the landing ring fixed plate, mm: 160 D of the landing ring movable plate, mm: 100 Pusher stroke, mm: 160 Hydraulic oil grade: 46 Oil volume, lit .: 620 Oil change, hour: 9000

YEAR 2010 1. TAI-1300C - LIFTING UNWINDER Product Width: 100-1250mm Diameter of roll max 1000mm Edge Position Control System (E.P.C) Auto Tension Control System 2. TA-1300DTC-2 - DRAW-TAPE FEEDING SYSTEM Tape Thickness: 0.015-0.02mm (HDPE) Draw-Tape Width: 80-100mm Max. O. D. of Draw-Tape: 650mm 3. TA-S-1250 - SHUTTLE TRACK SEALING & PERFORATING UNIT Max. Bag Length: 1200mm (Max. Sealing Width) Bag Width: 140-2000mm Film Thickness: 0.01-0.08mm (LLDPE, Single Layer) 0.008-0.025mm (HDPE, Single Layer) Speed 100 m/min 4. TAF-1700 - TRIANGLE FOLDING UNIT 5. TAD-450 - FOUR SHAFT SPINDLING WINDER Coreless Production Width: 100-380 mm One of the Machines is upgraded to new model Servo driven punching device and hot air sealing system for draw tape sealing unit.

CAPUZZI M20 + M22 + M25 mm corrugator line. OFFER: CAPUZZI CORRUGATOR TEAM composed of: - CAPUZZI CORRUGATOR EQUIPMENT made of water-cooled aluminum -3 sets of MOLDS for corrugated tube measures M20 + M22 + M25 mm. external diameter. ... mais informação