extrusoras usadas para venda

Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap  ... mais informação

used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available ... mais informação

Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time ... mais informação

Used Kühne Extruder Year of construction :1988 Extruder is functional. Gearbox slightly leaking.  ... mais informação

A110 Twin-screw side feeder (ZS-B) The ZS-B allows fillers and additives or chopped glass fibres to be fed in from the side in powder and/or pellet form. The co-rotating screw shafts are largely self-wiping and pro-mote active conveying. The feeder can be attached to the twin-screw extruder in conjunc- tion with a connection housing at any point in the processing section where feeding of the above-mentioned materials makes sense. The ZS-B can be quickly installed or removed using quick-change devices on the screw barrel. The ZS-B is designed with a wheeled base frame; a flat and smooth installation surface is required for this. Sufficient spacemust also be provided for installation and removal, as well as for cleaning. The twin-screw side feeder consists of the following component parts: ● screw barrel ● 2 screw shafts with positive engagement ● frequency-controlled motor  ...

for HDPE LDPE PC PS ABS, nominal throughput rate 350-400 kg/h including:, loading belt, metal detector, Meccanoplastica Granulator 600 mm., n.3 + 2 knives 550 mm long, 37 kw drive, extraction vent buffer silo with agitators extraction screw, crammed feeder extruder with 105 mm screw diameter 36 L/D, vacuum degassing pump semi-automatic, non stop hydraulic screenchanger hydraulic pack water ring pelletizer drying centrifuge electric cabinet CE compliance The line is offered RECONDITIONED - see[how we recondition at Germanplast](https://www.germanplast.eu/pagine/photo-gallery)

 ... mais informação

TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)

Extruder 1 spindle Brand: Bandera, 80 Ø diám 25L/D, with two speeds, alternating current motor: 55 kw (75 hp) with variable speed drive. Two replacement spindles, one for rigid PVC and one for plasticized PVC. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

Year of issue: 2006 Length of injection molding machine, mm: 6900 Width of injection molding machine, mm: 1700 TPA height, mm: 2500 Clamping force, tons: 320 Weight, t: 12 Screw diameter, mm: 55 Injection volume, cm³: 1026 Productivity kg / hour (РС): 187 Drive, kW: 37 Heating, kW: 18.5 Slab size, mm: 1000 Slab size, mm: 1000 Between columns, mm: 660 Between columns, mm: 660 Fastening of clamps VNUTR cont., Mm: 280 Fastening of clamps VNESHN. cont., mm: 350 KRM plate travel, mm: 670 Package height min, mm: 240 Package height max, mm: 680 Full disclosure KRM, mm: 1350 D of the landing ring fixed plate, mm: 160 D of the landing ring movable plate, mm: 100 Pusher stroke, mm: 160 Hydraulic oil grade: 46 Oil volume, lit .: 620 Oil change, hour: 9000

YEAR 2010 1. TAI-1300C - LIFTING UNWINDER Product Width: 100-1250mm Diameter of roll max 1000mm Edge Position Control System (E.P.C) Auto Tension Control System 2. TA-1300DTC-2 - DRAW-TAPE FEEDING SYSTEM Tape Thickness: 0.015-0.02mm (HDPE) Draw-Tape Width: 80-100mm Max. O. D. of Draw-Tape: 650mm 3. TA-S-1250 - SHUTTLE TRACK SEALING & PERFORATING UNIT Max. Bag Length: 1200mm (Max. Sealing Width) Bag Width: 140-2000mm Film Thickness: 0.01-0.08mm (LLDPE, Single Layer) 0.008-0.025mm (HDPE, Single Layer) Speed 100 m/min 4. TAF-1700 - TRIANGLE FOLDING UNIT 5. TAD-450 - FOUR SHAFT SPINDLING WINDER Coreless Production Width: 100-380 mm One of the Machines is upgraded to new model Servo driven punching device and hot air sealing system for draw tape sealing unit.

CAPUZZI M20 + M22 + M25 mm corrugator line. OFFER: CAPUZZI CORRUGATOR TEAM composed of: - CAPUZZI CORRUGATOR EQUIPMENT made of water-cooled aluminum -3 sets of MOLDS for corrugated tube measures M20 + M22 + M25 mm. external diameter. ... mais informação

Macchi extruder 160 cm for HDPE LDPE Bimetal 160 cm roller Capacity : 150 KG/hour Automatic bobbin change 37 KW ABB driver 11.5 meter height ... mais informação

WPC production line 1. Twin-screw extruder GWC 80-156 2. Twin-screw extruder GWC 65-132 3. CAL 14000/6 calibration table 4. ROL 240 two-track haul-off 5. Saw 240 6. Cheyenne SP2 brushing machine 7. SR-RP700 wide-belt sander 8. Storage device 9. Mixer 500 / 1000L + weighing system 10. Complete line for pulverization + drying room Pulverizer Installed power: 26 [kW! Turnover 3300 [Rpm]! Capacity: 300 [kg / h]! Grain size: 65-80 [mesh]! Input material size

Processing both PVC dry blend / PVC pellets ‑ Special design extruders for a perfect PVC melting and uniform plasticization ‑ Specific rotating dies for an even material flow and thickness distribution​ ‑ Automatic calibration cages and collapsing boards ‑ Fully automatic winding stations ‑ Water cooling circuit on specifics and key points of the lines ‑ Easy machine operation by LCD touch screens ‑ High level of automation and process optimization solutions.

Most of the components of the line have been sold independently. Remaining for sale now: Single screw extruder Pagani-Italy ⲫ60x 1700 [mm]; 32KW engine; 6 heating zones with potentiometer The pictures show other elements which were previously for sale, but this is not the case anymore. ONLY THE SINGLE SCREW EXTRUDER is for sale. The price shown online is for the single screw extruder too.

Know-how included FOAMED PP Film Line: 540 mm wide, can produce 1200 - 1500 Kg per day (120-140 mic) Extrusion by Dipiemme,Italy (1991) With Piovan Dosaging(1998) Corona by Martignoni(2004) Scan-T Control by Roder Electronics Mechanical parts of the machine constructed by Off. Trevisani S.a.s Ferroli Cooling

Used Tecom E 70/30 S Extrusion - Single screw extruder Technical details in the pictures ... mais informação

For Sale: Complete Extruder Line Manufacturer: Union Type/Model: Ø 120 LD 42 Year: 1998 Motor: 147 kW DC variable speed Condition: in good working condition Water ring palletizer Screw diameter: 120 mm, Screen changer: OMP PREALPINA Year 2013 like new Screen changer type: hydraulic, Ø 300 mm Degassing System: atmospheric degassing Capacity of 300÷500 kg/h, depending on the type of material and MFI Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PS, ABS Spare parts: 3 screws second-hand Control panel