extrusoras usadas para venda

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: A439697 Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

production extrusion line for the production of binder for baling from PP KIT TO THE FINISHED PRODUCT (AS SHOWED IN THE PHOTO) The line is from 2018 and it works flawlessly Are we looking for a strategic partner to sell an item Sale of the building 1000 m / 2 - price negotiable I am at your disposal for more information

PE/PP thick Sheet/board extrusion line Capable to produce ABA multilayer sheet extrusion thickness from 3 to 30 mm Widthness 1500 mm Extuders; JWS D/L=150/35 vented single screw extruder and D/L=JWS 90/35 vented single screw extruder, Hydraulic screen exchanger, ABA Distributor, 3 roller calendars (ODXL=700X2100 mm) with Fully oil temperature controlled, 10 pieces of cooling rollers with drive and cooling water units, 5 rolls temperature controlling system with drive, Cooling bracket (Cast aluminum) and lamination unit, tunnel anneal oven, First Haul off unit, Cooling bracket (Cast aluminum), Second haul off unit, Film coating system, Length and Transverse cutter, Belt conveyor, electricity control all of electrical, electronic and mechanical components were chosen from named company brands. (Servo motors from Yaskawa brand-Japan, PLC-Siemens S7-200, screen-Sie ...

Complete extrusion line for the production of PP and PS films, produced by Battenfeld-cincinnati GmbH 2012 release, Designed for the production of films of polypropylene and polystyrene. equipped with a loader Moretto Main technical characteristics: Extrusion line: Possible materials for processing PP and PS Max. film width 850 mm Film thickness 300 ÷ 2000 microns Productivity 400kg / hour Gross weight, kg 18 138 kg 2nd position winder: Max. film width 1000 mm Max. diameter of winding is 1400 mm Pneumatic winding shaft diameter for 152 mm (6 ’) sleeves To operate the equipment, a three-phase AC network is required, compressed air with a pressure of 8 Bar, water supply.

Thickness range : 0,15 - 3,00 mm Max width : 1.400 mm Raw materials : HIPS - ABS - PP - PE single layer                                   GPPS-HIPS, SAN-ABS, PMMA-ABS double layer Extruders: Main extruder : Diameter 110 mm, 160 kw AC motor, degassing, 7 zone heat control Co-extruder : Diameter 90 mm, 55 kw AC motor, 6 zone heat control Screen changer: Double screen changer, hydraulic Melt Pomp : 600-700 kg / h capacity 15 kw AC motor Feed Block : AB - ABC T die : 1600 mm width - 9 zone heat control Calender group: 3 pcs diameter 350 x 1570 mm high efficiency water cooled cylinder                            Hydraulic cylinder movement and mechanical lock                            3 pcs cooling heat control device ...

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 A439697 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Nanjing Juli Chemical Machinery Co., Ltd. SHJ-75B PET twin screw granulator Extrusion - Twin screw extruder Twin screw extruder production line 75B machine twin Water ring Roots three- stage vacuum unit 500 vibrating screen First-class air delivery system with storage bin 300-500kg / hour, the specific output depends on the raw material melt flow rate, specific gravity, formulation and production process the screw diameter： Ф71mm； Main motor power: 132kw (Siemens bader ac motor) Main engine screw speed: 326rpm Heating power of main engine: 76kw Total installed power: 230 ~ 245kw The actual consumption is 150 ~ 160kw

Designed for winding of polymer and composite pipes with a diameter of 16 to 63 mm and automatic strapping of finished coils of polypropylene stripping tape. Year of production: 2005 Country of manufacture: Italy Condition: like new. Running about 300 hours. Then all extrusion production was stopped and never started again. The extrusion lines were sold separately. Coiling range of tubes: 16 - 63mm Packing: automatic polypropylene stretching tape. Synchronizing tensioning arm With pneumatic brake and tension sensor. Controls coil rotation speed and winding tension. Control panel with graphic display and digital keypad. Condition: fully operational. Can be demonstrated in dry cycle. Availability: immediate shipment

Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels

Complete Working Melt Blown Plant Consisting of: 1 Mm 65 Extruder With 6 Heating Zones 1 Extruder Head 1 Vacuum charger 1 carpet and carpet turner 1 Reel With Meter Counter And Material Cutting 1 Electrostatic Load Control Unit And 2 Electrostatic Bars 1 Air Compressor 22kw + Soundproofing Cage 3 Dies Holes 0,20 Miss 600 Mm 1 Pyrolysis Oven X Die Cleaning 1 Ultrasonic Tank For Die Cleaning 1 Aspirator Behind The Mat For Melt Blown Formation 1 Complete System With Suction Hood And Pipes

N 1 UNION die, used for the extrusion of a profile for 60 mm diameter shutters, complete with screw and asynchronous motor 380 V, 7.75 KW, with six gears. Changed cylinder and screw in 1985. Replaced screw in 2015. Construction year 1976. Capacity : 30 kg/h in 3rd gear. N 1 TEM electrical panel, used with six zones with thermoregulators and thermocouples by Scotti Instruments s.p.a. N 1 Automatic equipment, used, for P.V.C. profiles rigid brand CERRINI type C.P. 80/PW complete with calibrator holder plate with vacuum pump with 4.1 KW motor, towing unit, cooling unit with fan with 0.75 KW motor, punching unit, stick stop punching unit, cutting unit and automatic tilting unit of mt. 6. Complete equipment for rolling shutter rigid pvc profile extrusion (produced in 1995) N 1 complete chain of resistances N 1 steel calibrator Complete equipment of rigid pvc profile extrusion for shut ...

Tecom extruder rotating head, inverter motors consumption in operation 9kw/h Productive yield 40Kg/h. Integrated castle, motorized tow adjustable in height and modified for sheds up to 4m. Mixer, dryer, automatic master doser, UV ray printing treatment. New wiring and thermoregulators. Band min 18cm Max band 80cm Bivalent screw: extrudes HD/PLT/BIO COMPOST Visible under power in Italy

Single screw extruder - Screw diameter: 80 mm - Length: 90cm - With pre-mixing chamber heated with diathermic oil - Head cut - Loading hopper - Complete with electrical panel ... mais informação

Manufacturer: OFFICINA MECCANICA PREALPINA S.R.L Type/Model: T.60 L/D 35 with vent Year: 1995 Motor : 45 KW AC Condition: in good working condition Hours :20933 Screw diameter: 60 mm, recently refurbished Hour meter: 20933 Capacity of 70÷100 kg/h Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PC, ABS, ABS/PC Line composition: - Single extruder - rigid materials dosing unit - die head-spaghetti - filter Cresta Ø 90 mm - hydraulic screenchanger semi-automat without interrupting the extrusion - degassing pump - cooling water bath - Electrical equipment of control and command with cooling - Sheer pelletizing unit SGS 100

PVC sheet extrusion line with head: 280mm, composed of: - 2-screw extruder, brand: Weber, model: DS.8.22, motor: 30 Kw (40 hp), load doser, degasser with vacuum pump. Variable speed drive and electrical panel. - Wide blade head: 280 mm. - Calender, width: 300 mm, diameter: 150 mm. 3 water-cooled rollers. With stretching. - Ink baths, dryer, stretch for several coats of paint. - Cutting shear. - 1-reel winder, width: 300 mm. - Various replacement rollers for ironboards, printers and engravings (drawings on foil). Ahem: Wood simulation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Extrusion line for 3D monofilament composed of: - Extruder 1 spindle, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With drying hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretch: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large reel unwinder and double rewinder for small reels. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

x-travel: 250 mmy-travel: 200 mmz-travel: 90 mmcontrol: 5D HSC 6000 A-axis: +/- 180 °b-axis: +25 -15 °spindle turning speed range: 40.000 U/mintool taper: HSK 25 E min./max workpiece dia.: 3 - 10 mmtool change unit: 7-fach total power requirement: 7 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 0,78 x 1,85 x 1,165 mThe machine for dental use- suitable for metal, plastic, wood and zirconium blanks- 5 axes simultaneously- Milling spindle HFS 201 quick-change (has been overhauled)- High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts)- Additional tool change magazine with 14 places (linear pick-up system with collision protection)- Tool length scanning- Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code)- W.Loader workpiece changer for up to 30 blanks- Max. height of blanks: 25 mm- Extraction unit for effective di ...

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, NEW SCREWS, n.1 dosing unit with hopper, N.1 vacuum degassing pump, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screenchanger with 90 mm screens (available with fully automatic screenchanger, hydraulic pack, strand die (available with water ring pelletizer), cooling bath with heat exchanging unit, strand pelletizer (available fitted with a water ring pelletizer), electric cabinet with air condititioning (for extruder, screenchanger, hydraulic pack), constructed i n 2001, The line is offered reconditioned, Possible addition of :, vertical mixer, vibro-classifier, bag filling station, etc. on separate offer, CAPACITY: 400 kg/h

Reifenhauser RH 241 Single screw 50mm 25D Only extruder there is no cabinet Make an offer  ... mais informação

EXTRUSIONE LINE PREALPINA CDM, throughput rate 500-700 kg, Installed power 435 kw (about 280 kw used in work), crammed feeding unit, n.4 next-to-new Maguire gravimetrical dosing units on supporting structure, Barrel with 130 mm screw Ø 35 L/D, screw geometry for LDPE LLDPE HDPE PC PS ABS, N.1 vacuum degassing pump, FIMIC RAS 400 fully automatic screenchanger, water ring pelletizer, drying centrifuge, vibro classifier, This line has been totally reconditioned in 2020 replacing many parts with original ones (cabinet/feeding piece/screw/barrel,), Still connected and working with PE., Ready-to-go, THROUGHPUT RATE: 500-700 kg/h, MATERIALS: PE PP PC PS ABS, INSTALLED POWER: 435 KW, AVAILABILITY: immediate