extrusoras usadas para venda

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/  ... mais informação

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/  ... mais informação

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/  ... mais informação

Ermafa twin screw extruder B 2.95-35 D 1992/1995 -Extruration plant for recycling -with hot-tee, Filter -Drying centrifuge, -Degassing plant, -storage silo, -discharge silo, -Chain elevator. -900-1000 kg/h PP  ... mais informação

Plastics Recycling Extruder PP=900-1000kg Complete Line ... mais informação

cutting diameter: 280 mmcapacity 90 degrees: flat: 380 x 260 mmcapacity 90 degrees: square: 260 x 260 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated capacity: 2000 Wattwork piece lenght: 1075 nmTemperature range: 15 - 40 °Cdimensions: 550 x 1100 x 1200 mmtotal wight: 200 kgMobile laser welder with PenWelderhand-held PenWelder:- pulsed laser operation- average laser power up to max 500 W- Pulse duration 1 to 200 ms depending on application- peak pulse power 1000, 1500 or 2000 W- Siemens control- Integrated protective gas supply- Exchangeable -, adaptable process module (contact tips)- Pilot laser from laser source- Laser parameters via control panelLaser light cable LLK-A / BF 10:- Diameter(µ): 300 / 400 / 600- Length(m): 4 / 6 / 10 / 20Unit little usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning dia. over bed: 3.520 mmturning diameter over slide: 3.000 mmturning diameter over slide: 2.440 mmturning length: 15.000 mmControl: Sinumerik 840 D SL turning speeds: 50 U/minworkpiece weight max.: 80.000 kgturning diameter: orig. 3500 / mod. 2400 mmaccuracy +/-: 0,01 °total power requirement: 110 kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 m- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system.- In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to bereworked.Thus, the entire bearing arrangement was modified and optimally adjusted.- In addition, control and safety-related points had to be modified.- Geometric acceptance report- Temp ...

x-travel: 250 mmy-travel: 200 mmz-travel: 90 mmcontrol: 5D HSC 6000 A-axis: +/- 180 °b-axis: +25 -15 °spindle turning speed range: 40.000 U/mintool taper: HSK 25 E min./max workpiece dia.: 3 - 10 mmtool change unit: 7-fach total power requirement: 7 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 0,78 x 1,85 x 1,165 mThe machine for dental use- suitable for metal, plastic, wood and zirconium blanks- 5 axes simultaneously- Milling spindle HFS 201 quick-change (has been overhauled)- High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts)- Additional tool change magazine with 14 places (linear pick-up system with collision protection)- Tool length scanning- Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code)- W.Loader workpiece changer for up to 30 blanks- Max. height of blanks: 25 mm- Extraction unit for effective di ...

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m6-axis industrial robot YASKAWA MH502 CNC rotary tables1. rotary table 1 and rotary table 2limited Nmax=1.300 1/minReduction ratio I= 1:72Nmax: Reduction ratio and Nmax motor corresponds to 120°/sec on the tableMdnenn. Output = 828 NmMaximum centric loading weight = 15 kNCentering force from inside to outside clamping = 7,540 N @ 6 barCentering accuracy in the gripper = 0.05 mm [PA]Rotary field restriction depending on cable and hose situationProvided for ± 720° (provide for this in the robot controller)Motor: YASKAWA SGMRV-20ANA-YR11Milling spindle: AMTRU (CH), type Flexicut 250Gearbox: ZAE Hamburg, type: S100B-1300/65-HOX-72.0:1-3000Version: with Yaskawa servo axis + ZAE worm servo gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 700 mmy-axis: 1.000 mmz-axis: 500 mmmax. table load: 900 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3D coordinate measuring machine- PC with software, various probes- Renishaw PH10MQSoftware: PC-DMIS Pro 3.7 Maintenance Release 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 600 mmy-axis: 300 mmz-axis: 200 mmmax. table load: 25 kgtotal power requirement: kWweight of the machine ca.: 40 kgdimensions of the machine ca.: m3D production measuring system15-inch monitor (mounted on a transport trolley)As good as new, only used 4-5 timesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting speed: 15 - 90 m/mintotal power requirement: 2,4 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 2,15 x 1,5 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

cutting diameter: 350 mmsaw band length: 5270 mmcutting width: 335 mmtable height: 800 mmcutting speed: 0-110 m/mintotal power requirement: 16 A kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,2 + 2 RB x 3,5 x 1,9 mCooling water deviceChip conveyorRoller conveyordiv. saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2700 mmControl: AMADA AMNC II-PC throat: 415 mmstroke: 200 mmdayligth: 500 mmadjustment of the rear stops: 600 mmtable width: 60 mmnumber of controlled axis: 7 ajustment speed: 200 mm/secbending speed: 20 mm/sectotal power requirement: 5,3 kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mIncludes:-Matrix holder for 1V matrices, pluggable, total height with holder: 140mm-Status indicator light-5-axis backgauge with stop sensor systemFolding robot: ASTRO-100 NTIncludes:-Standard gripper-Reposition gripper on the upper press beam-Regripping support for large workpieces - pneumatically drivenTechnical data see PDF attachment.Handling robot: ASTRO-MP20Includes:-Loading table with spreading magnets-Vacuum gripper Medium and Large-Combi gripper (suction/gripping) for vertical loading-Device for vertical loading of ...

x-travel: 980 mmy-travel: 1080 mmz-travel: 280 mmControl: table-size: 1.125 x 1.700 mmtable height: 800 mmdiameter: 435 mmspindle pitch: 16 x 5 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,08 x 1,98 x 2,0 mAccessories:- Tool changing station- TS20 probe- Clamping systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação