extrusoras usadas para venda

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRA ...

Varex 3-layer blowfilm-extruder Head diameter: 630 mm Screw diameter: 70-90-70 mm( die gap: 2,4) Film width: 1390 – 2580 mm Film thickness: 10-200 my Output: max 480 kg /hour Winding diameter 1200 mm Core diameter 76/150/152 mm Energy: 295 kW/h Treatment: in+outside  ... mais informação

CAST FILM EXTRUSION LINE SML winding unit This production line was professionally dismantled in 2017 Designed for COEX- cast foil production. Processing of thermo plastics in a temperature range of 150-300°C. The system can be operated with the following combinations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output max. 900 kg / h Main extruder: 105/33 L / D max. 650kg / h Extruder CO .: 90/33 L / D max. 250kg / h Foil width NET: 800-1400 mm Thickness: 25-530 µm Production speed 8-150m/min Roller width: 1600 mm Max. Roll weight: 2000 kg Version with Airnife and vacuum box One gravimetric dosing device with 3 stations per extruder Each extruder is equipped with a melt pump and a 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-cont ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT  ...

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Reifenhauser RH 241 Single screw 50mm 25D Only extruder there is no cabinet Make an offer  ... mais informação

small die-head with 60, 80 or 100 mm die-insert, with cooling ring ... mais informação

we design small pipe / profile lines on request, also coex ... mais informação

Corrugator (without tools) suitable for pipes up to 315 mm Manufacturer: Fränkische Type: FDC 315/36V Year of construction: 2007 (never used in production) Basic technical data: Max. product diameter: 315 mm Number of mould jaws: 36 Electrics: 3 x 400V 50 Hz + N + PE Extrusion height: 1100 mm Serial No.: MV-2034 Operating hours: 450 hours / mechanical only Condition: very good, never used in production, for mechanical demonstration only.

Vacuum Corrugator suitable for the production of single-wall corrugated pipes from 4.5 – 25 mm AD designed for 90 pairs of moulded jaws Manufacturer: MAINTOOLS Type: Inovo 25/90 BV Year of construction: 2008 Condition: cleaned and functionally tested!  ... mais informação

complete used multilayer composite pipe extrusion line (PE-AL-PE) suitable for pipes from 10 - 32 mm Includes tools for diameter 16mm Year of construction: 2010 Condition: very good and ready for use!  ... mais informação

The winder is part of a cast film system and is in good condition. Max. foil width = 2350 mm Max. roll width at inlet = 2600 mm, Max diameter roll = 980 mm Sleeve size 3", 6 Film thickness= 15 – 200 my, Max. speed = 250 m/min Edge trimming with razor blades, The winding can be in contact or gap Automatic loading of 3 inch sleeves from the sleeve magazine. Automatic unloading of the finished roll by means of a robot.

This Extruder from Berstorff is in machine storage at Plastima Used Machinery. The doser is from 1988 and is in fine condition. – Brand: Berstorff – Construction year: 1988 – Screw Ø: 200mm – Engine: 337 kW – Single-degassing incl vacuum pump accessories  ... mais informação

Line for PVC profiles : 1.Extuder Single Theysohn AS 63mm PVC 2. Calibration table Greiner Genius Cal 2P/3.6 3. Theysohn REA32/1HJ-TECH belt lashing 4. saw Theysohn REA32/1HJ-TECH) price for all Line 25.000 Euro  ... mais informação

Gottfert blown film extraction unit  ... mais informação

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Plant consisting of 5 silos of 55 cubic meters each with auger, transport pipes, weighed auger, elevator, trunk complete with electrical panel, silo filling system and vibrating system for cleaning/emptying. Present technical documentation and CE declarations. Brand : OMT Year of construction 2014NOTES: The entire system, in excellent condition of use, can be disassembled into 4 parts, each transportable in standard mode (no exceptional). The manufacturer is available for assistance in dismantling and reassembling the item anywhere in the world.

Single screw Extruder Theysohn 63mm we have for profiles:( Calibration table Greiner Genius Cal 2P/3.6 // Theysohn REA32/1HJ-TECH belt lashing and saw  ... mais informação

A refurbished extrusion recycling product EREMA Intarema Type 1714 TVEplus for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. High up-to-date technical standard. Capacity up to 1,200 kg/h, electrics 220 / 380 V 50 Hz, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

See PDF attached  ... mais informação