used beck shrinking tunnels

Passage height 220 mm Belt inlet 500 mm width Dimensions 1800 x 1150 x 1200 mm

1 BECK shrink tunnel type HV1000, working width 100 cm, year 1995

1 BECK shrink tunnel type HV601, working width 60 cm, year 1999

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

Specifications: Passage width: 600 mm Passage height: 250 mm standard Hood length: 1,700 mm Transport length: 2.100 mm Transport chain: link mesh tape with chicane Current type: 230/400 Volt three-phase current N-PE Heating capacity: adjustable from 4 - 18 kW Power: 19 kW Throughput speed: infinitely variable Colour: creamy white-grey

Specifications: Passage width: 400 mm Passage height: 150 mm standard, the passage height can be changed by using additional strips Hood length: 1,700 mm Transport length: 2100 mm Transport rod spacing: every 4th rivet occupied Teflon net coating for products with a small footprint Current type: 230/400 Volt three-phase current N-PE Heating power: controlled by solid stat. relay Power: 19 kW Throughput speed: infinitely variable Color: Hammer blow aluminum No guarantee is assumed for the technical data given in the description.

Very well maintained shrink tunnel , 400 V, 13 KW

Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.

Manufacturer: BECK Machine type: Shrink Tunnel

Film Shrink Tunnel Shrink Tunnel Manufacturer: Beck Type: HV 601 Year of construction: 2011 Tunnel passage width max.: 600 mm Tunnel passage height max.: 280 mm Length of heated tunnel hood: 1,000 mm Transport length: 2,100 mm Heating capacity: 4 - 12 kW adjustable Connected load: 13 kW

composed of: Cellophanizer Shrink tunnel Conveyor belt and carton reseeers good condition

format 35 x 54 cm Year of construction 1989 Film packaging station pneumatic slot Shrink tunnel Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Connected load: 13kW.

Connected load: 12kW.

Item condition: Top maintained Availability: as of now 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control co ...

Becker vacuum pump / absolutely mint condition Run-time = 1 hour for test purposes Year 2013 Motor output 1,5-1,8 KW New price 2,400 euros

Beckman HPLC Plant System Gold, Gradient Pump Model 128 0,01 to 10 ml/min and DAD Detector complete with Software 32 carat

Becker vacuum pump type: 80 L / 4 X Engine No. A202-300 Serial No. 1491627 Suction capacity: 10/12 CC/h Suction pressure: 3/3 mbar

sell used vacuum pump

11xNUMMERATORS

Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary

Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use

Rotary vane compressor - running dry Manufacturer: Becker Type: KDT 3.140 motor: 400V 7.5 KW/50Hz suction power: 140m3/h Compression pressure: 2500 mbar (abs.) 1500 (overprint) Status: Generalueberholt and repainted Procurement: 12 months Zubehoer: - User manual We are happy to answer any questions you may have. ready for use

; ready for operation