used ENGEL for sale

Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg

Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg

Inv. Num. : 6582 Type: ES 330/65 Producer: ENGEL Produced: 1991 Parameters: Clamping force: 650 kN Screw diameter: 35 mm Injection capacity: 154 cm³ Height of the clamping plate: 570 mm Min. width of the clamping plate: 552 mm Distance between stands (horizontal): 405 mm Distance between stands (vertical): 345 mm Injection weight: 4000 kg

Inv. Num. : 6279 Type: ES 500/90 HL-ST Producer: ENGEL Produced: 1998 Parameters: Clamping force: 900 kN Equipment: Robot system

Inv. Num. : 6278 Type: ES 750/175 HL Producer: ENGEL Generated: 2001 Parameters: Clamping force: 155 t

Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...

ENGEL ES 330/80 HLS injection moulding machine built in 1998 in Austria is designed for processing plastics by injection moulding. The injection moulding machine is equipped with top-quality components that increase productivity and efficiency. All parameters are conveniently programmed on the ENGEL CNC control installed on the machine body. The plastic processing machine weighs 4900 kg. Technical specifications of the ENGEL ES 330/80 HLS injection moulding machine - CNC controller: ENGEL - clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum screw speed: 400 rpm - minimum screw speed: 20 rpm - injection pressure: 1600 bar - injection speed: 113 mm/s - minimum mould height: 200 mm - maximum mould opening stroke: 450 mm - mould mounting platen dimensions (L x W): 660 x 560 mm - maximum distance between platens: 650 mm - mould mounting hole dimension (fixed plate) ...

ENGEL ES 200/75 HL-V injection moulding machine was built in Austria in 2000. The highly reliable and robust machine is designed for processing plastics by injection moulding. The high-end components installed on the ENGEL ES 200/75 HL V injection moulding machine guarantee a significant increase in work efficiency and productivity. The machine operating with a force of 75 tonnes works with injection moulds of a minimum height of 200 mm, which are placed on 660 x 560 mm platens. All process parameters are programmed and controlled on the convenient and intuitive ENGEL CNC control, located on the body of the plastics processing machine. The total weight of the machine is 4700 kg. Technical specifications of the ENGEL ES 200/75 HL-V injection moulding machine - CNC control: ENGEL - clamping force: 75 t - injection volume: 135 cm3 - injection pressure: 1065 bar - injection speed: ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

Engel ES 1350/300 HL Year of construction 2001 + 2003 Hours: 77623 h + 92737 h Clamping force: 300 tons. Screw diameter: 70 mm 4 core pulls incl. Wittmann removal robot

Production year: 2004 Injection unit: .../500 Screw diameter: 40 mm Specific injection pressure: 2019 bar Injection volume: 251 ccm Injection weight: 239 g Tool closure system: 120/... Clamping force: 120 t Tool plate dimensions: 740 x 680 mm Distance between columns: no columns mm Tool height: 300 mm Opening distance: 500 mm Max.Distance plates: 800 mm Ejector stroke: 130 mm General data: Pickup date: Immediately Dimensions (m) LxWxH: 5,1 x 1,5 x 2,1 m Weight: 7600 kg Instrumentation: - 2 x pneumatic valve - hot runner connection - bimetallic injection system - we have to the Picker machine

Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...

Engel e-victory 170/80 Ecodrive / production line with the robot Engel Viper 20 / hybrid machine Year of construction: 2017 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 22,581 h Euromap 67 Robot Interface Air Valves Hydraulic core pull x 2 Control with hot runners Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Parallel Movements  ...

Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...

Engel Insert 80V/80V/100 2F/2-K Tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared Protective Curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine was regularly serviced by the authorized service Engel in Germany Metrics: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started by our serv ...

Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...

Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel Del ...

Engel Victory 200H/60W/180 combi / production line with the robot Engel Viper 20 Year of construction: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: 2K machine with the original robot Engel Viper 20 Tie-bar-less machine, hybrid: energy-saving, high-revving and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Hydraulic Core Pull x 6 Hot runner control x 36 Reinforced Injection Units - Bimetal The second injection unit is angled, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main Motors - 2 x Servo Motor Controlled with Inverter Proport ...

Engel Victory 1060/180 Ecodrive / hybrid machine / operating hours: approx. 11,000 in automatic mode Year of construction: 2019 Injection unit: Screw diameter: 55 mm Injection weight: approx. 495 g Spray pressure: 2000 bar Dosing volume: 523 ccm Clamping unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Size of clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 11,000 in automatic mode Total number of operating hours: 16,350 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Proportional ...

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 26,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 26,000 in automatic mode Total number of operating hours: 30,323 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Engel injection moulding machine old

Year of construction: 2002 Clamping unit - Clamping force: 700 kN - Tie bar width: tie-barless - Tool installation height 250/ 700 Injection unit - Shot weight (HP): 139 g - Screw diameter: 35 mm Pump running time - approx. 81,042 h Remark: - Dispensing without sprue picker and external Peripherals - VT card 2 defective General - 4 core pulls

Year of construction: 2006 Clamping force: 90 tons. Screw diameter: 35 mm Pump hours: 46393 h

Injection moulding machine ENGEL Victory 1050-220 TECH Stock No.: 503439 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of construction: 2006 Hours: 92465 h Technical Data Closing Page Clamping force: 2200 kN Plate size h x w: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Aperture travel: 755 mm Ejector stroke: 180 mm Ejection force: 80 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Auger length: 20 l/d Auger stroke: 200 mm Screw speed: 230 min Plasticizing Current: 55 g/s PS Outdoor injection flow: 255 g/s hp Number of heating zones: 5 Nozzle travel: 350 mm Dimensions & Weight Machine dimensions LxWxH: 6.2m x 1.7m x 2.2m Total Weight: 12900KG Equipment CEE socket 16A Compact Flash  ...

Injection moulding machine ENGEL VICTORY VC 650-150 Tech Stock No.: 503440 Manufacturer: ENGEL Type: VC 650-150 Tech Control: CC100 Year of construction: 2005 Hours: 92467 h We are pleased to introduce you to our used ENGEL VICTORY VC 650-150 Tech injection moulding machine. This high-quality machine has a 40mm screw and a clamping force of 1500 kN. Perfect for precision injection molding in a wide range of applications. Please note the increased minimum installation height of 395mm. Technical Data Closing Page Clamping force: 1500 kN Panel size h x v: 750 x 750 mm Min. installation height: 395 mm Plate spacing max.: 995 mm Aperture travel: 600 mm Ejector stroke: 150 mm Ejection force: 61 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 1800 kg Technical Data Spray Side Screw diameter: 40 mm Displacement: 251 ccm Injection ...

ENGEL 2k 200 ton year 2009 x 2 units. Used for handles of toothbrush

Manufacturer: ENGEL, type Insert Insert 80H/35 Construction: Rotary table Clamping force: 35 t Year of manufacture: 2011 - neat condition, maintained, no oil leakage. Commissioning: 23.11.2011 Hours: 36,077 hours Injection unit: 18 mm Control: CC200

Clamping force 150 ton

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 200/50 Focus (150) without funnel General information Item number: 150 Availability: In stock Year of construction: 2007 Brand: Engel Specifications Spray weight: 89 g Clamping force: 500 kN Screw diameter: 30 mm Spray pressure: 1451(2205) bar Spar spacing: Tie barless Clamping plate size: 450 x 500 mm Control: EC 200 Language: German Power: 31 kW Operating hours: 79044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m Funnel: No Core train: Yes

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Angel E-Max 200-50 (215) General information SKU: (215) Availability: In stock Year of construction: 2008 Brand: Angel Specifications Spray weight: 50 g Clamping force: 500 kN Stand: Used Screw diameter: 25 mm Injection pressure: 2400 bar Tie bar spacing: 320 x 370 mm Clamping plate size: 520 x 470 mm Tool installation height min.: 150 mm Control: LC 200 Language: English/ Swedish Power: 14 kW Hours: 37500 h Weight: 3400 kg Dimensions: 3.8 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Angel E-max 440-100 (216) General information Item number: (216 MB) Availability: In stock Year of construction: 2009 Brand: Angel Specifications Spray weight: 198 g Clamping force: 1,000 kN Stand: Used Screw diameter: 40 mm Spray pressure: 2000 bar Tie bar spacing: 410 x 460 mm Clamping plate size: 650 x 600 mm Tool installation height min.: 150 mm Control: LC 200 Language: English,Swedish Power: 18 kW Operating hours: 36000 h Weight: 4400 kg Dimensions: 4.7 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Injection molding machine Engel ES 1350/250 HL ST with dryer

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

Robot - Angel Viper 20 Year of construction: 2015 5-axis robots: axes X, Y, Z, A, B are driven by servo motors (electrically) Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Inclined conveyor belt on stainless steel profile - Engel WFB100 Year of construction: The inclined conveyor belt on stainless steel profile, with adjustment of the height and angle of inclination Length of the inclined support belt 120 cm, length of the horizontal support belt 260 cm, width of the support belt 40 cm Carriers from the height 8 cm every 28 cm Height of conveyor belt housings 10 cm Mobile conveyor belt, on wheels Price: On request

Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004

Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

Complete control CC 90 for ENGEL injection moulding machines

various control cards CC 90 for ENGEL injection moulding machines

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h in fully automatic mode Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

very well maintained and constantly serviced injection moulding machine Manufacturer: Engel Type: VC 500/120 spex Control CC200 year of construction: 2010 Operating hours: 42500 h constantly maintained Special features/extras: 1 x core pull (on BAP) Hot runner: 4 circuits Clamping side: Clamping force: 1200 kN/ 120 tons Tie bar dimensions H X V tie bar-less Platen size hxv: 740 x 680 mm Installation height min: 200 mm Distance between platens max.: 700 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Injection side Screw diameter 40 mm Shot volume 251 ccm Injection weight: 230 gr./hp Injection pressure: 1297 bar (2023 bar increased) H2khaheng Dimensions: 4.82 x 1.48 x 2.01 (L x W x H) Weight: 6,800 kg. - immediately available now in our warehouse in Hanover free on truck or free to your door against freight reimburs ...

used injection moulding machine in fully functional condition Manufacturer: Engel Type: ES 330/75 Year of construction 2002 Masch.Nr. on request Control: EC100 Clamping unit Clamping force: 750 kN/ 75 to. Spar spacing: tie barless Tool clamping plates: 660 x 560 mm (hxv) Opening distance: 450 mm Wkzg. Installation height: 235 mm min. Distance clamping plates: 685 mm max. BAP/FAP centering: 110 mm Fq7zqir Injection unit Screw diameter: 30 mm (highly wear-resistant bi-metal) Spray volume: 113 cc Spray weight: 102 gr/HP Spray pressure: 2152 bar /2415 (increased) Extras Robot Interface (indiv) Machine without spray-sided full cladding Conveyor belt interface Interface Operating Data Acquisition Tool locking interface Interface for pneumatic closure nozzle Interface for 32-pin peripheral equipment Microcomputer with TFT color screen (EC100 A03) Witt ...

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L