used ENGEL for sale

Engel Victory 310-60 Electric Closing unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions and weight Net weight with control cabinet [t] 5.7 Dimensions (length x width x height) [m] 4.7 x 1.4 x 2.7 Number of heating zones: 4 Hydraulic core 2x; 1x air valve; EUROMAP 12 interface

Engel ES2000H750L Injection Moulding Machine 90 Kw Working hour: 149658

Capacity 700 tones Distance between columns 8080cantimeter

Year of manufacture: 2000 Screw diameter: 25 mm Injection volume: 69 cm3 Length/Diameter ratio: 24.8 L/D Maximum injection rate: 104 cm3/s Pressure on the material: 2000 bar Temperature zones: 4 Closing force: 500 kN Mold thickness: 200 mm Heating power: 6.8 kW Total installed power: 15 kW Oil quantity: 140 L Machine dimensions: 3800 x 1280 x 1970 mm Machine weight: 4700 kg

Sale of the machine and the robot, it is also possible to sell the hopper with the dyer + 2x term. The machine has not been worked on for 2 years, the machine is plugged in and there is an opportunity to test it. + Robot Engel ERC 13/1E

used Engel machine type Victory ES3550/600HL with additional peripheral devices. Number of hours: 1979 Injection unit: Screw diameter: 70mm Injection volume: approx. 1500cc Closing unit: Closing force: 600T Table dimensions: attachment, enlarged version Ejector: hydraulic Closing system: hydraulic, tie-barless Control: CC100 – Polish language Additional equipment: Hydraulic core string on the fixed side – x3 Hydraulic core string on the moving side – x3 Pneumatic valves – x2 Hydraulic cascade valves – x6 Automatic drives of side covers on both sides of the form, The machine is serviced by an authorized Engel service center, In 2020, a set of hydraulic pumps was replaced with new ones, Dimensions: Weight – 38T short circuit unit, 10T injection unit, Dimensions (L x W x H): 9410 x 2480 x 2580 Power supply: Pump/Motor: 60kW Heaters: ...

Producer Engel Type Victory 750 / 180 tech Year 2004 Clamping unit Clamping force 180 ton Opening stroke 750 mm Distance between tie bars 960 x830 mm Mould height min. 500 mm Opening width 1250 mm Injection unit Screw diameter 45 mm Injection volume 318 cm³ Shot weight 302 g Injection pressure 1769/2360 bar Measurements and weight Machine weight 13500 kg Robot Producer Wittman Type W743 Year 2009

Producer Engel Type Victory 1350/300 Tech Year 2004 Clamping unit Clamping force 300 ton Opening stroke 900 mm Distance between tie bars 1100 x 1000 mm Mould height min. 400 mm Opening width 1300 mm Platen size (h x v) 1100 X 1000 mm Injection unit Screw diameter 55 mm Injection volume 617 cm³ Shot weight 588 g Injection pressure 1760/2180 bar Measurements and weight Machine weight 19400 kg Robot Producer Wittman Type W843 Year 2015

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 mm min./ max. mold height [mm] min 350 max 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 min./ max. mold height [mm] 350 - 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Control Type: CC200 Number of hours: 45,000 H Closing Closing force: 50T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Platform dimensions: 500 m x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 24.8D cm3: 69 Bars: 2400 General: Motor power: 15KW Heating power: 6.8KW Options: Cores: 1 Robot interface: yes Bi metal: yes

The injection molding machine is in good working order, sold due to the completion of the project. If necessary, it can be seen in operation. Clamping force: 340 t Injection capacity: 113 cm³ Screw diameter: 30 mm Equipment: Turntable

ENGEL injection molding machine unit for sale. The unit is used for gas injection. The year of production of the device is 2006. We bought it with the machine but we never used it. It has been in stock since purchase. The device is practically new, unused. We have full documentation.

Manufacturer ENGEL Type VICTORY 330/150 TECH PRO Clamping Force [tons] 150 Manufacturing Year 2003 Screw Size [mm] 30 Number of aggregates 1 Screw Type WS10 The minimum height of the mold [mm] 300.0 weight [kg] 9100 installed power kW 47 length mm 5193 width mm 1700 height mm 2000 occupied area of 8.8 m2 occupied area with a cage 13.6 m² oil filter HC35 - SMX10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 6 CE document 49834 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-18 UDT external battery revision 30/04/2021 UDT internal revision of the battery 05.2023 UDT battery registration number N2328017536 MC49 robot (UTM-750 TW) Diagrams office E v Schematics office H v Machine diagrams E v Ma ...

Manufacturer ENGEL Type Victory 500/150 Tech Clamping Force [tons] 150 Manufacturing Year 2005 Screw Size [mm] 40 Number of aggregates 1 Screw Type TW02.1_650 D40 LD20 G1.2 WS8 1180 The minimum height of the mold [mm] 300.0 weight [kg] 9600 installed power kW 39 length mm 5196 width mm 1804 height mm 2333 occupied area 9.4 m2 occupied area with a cage 14.9 m² oil filter HC28 - SM10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 5 date of last oil change II.20 CE document 158323 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-10 MC43 robot (W 721-0303) Diagrams office E v Schematics office H v Machine diagrams E v Machine diagrams H v Control card addresses CPU 1 Analog 4 Thermo 0 Control c ...

Engel ES 1350/250 HL injection molding machine Year of production - 1997 Closing unit: closing force: 2500 kN size of forming plates h: 1050 mm size of forming plates v: 650 mm min. mold height: 350 mm opening distance: 1200 mm opening stroke: 850 mm ejector stroke: 200 mm ejector force: 82 kNj Injection system: Screw diameter - 55 mm Injection volume - 618 cc Injection weight - 556 g number of heating zones: 5 nozzle stroke: 50 technical data of the robot-system Robot Engel Year of construction: 1997 handling weight: 10 kg X axis: 500mm Y axis: 1000mm Z axis: 2360mm

Injection moulding machine Manufacturer: Engel Model: ES 330 HL Year of manufacture: 2000 Capacity: 90 Tn Working hours: 50290 h

Engel Injection Moulding Machine With Robot Machine is in good working condition

Clamping force [kN] 23000 Dimensions of mounting plates (hxv) [mm] 2,900 x 2,500 Clearance between columns (hxv) [mm] 2.000x1.600 Maximum opening width [mm] 3000 injection unit Screw diameter [mm] 135 Injection volume [cm3] 8870 Dimensions and weight Net weight with control cabinet [t] 141

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm

Clamping force 120 tons. Ecodrive drive system -significant energy savings compared to a traditional drive. ! the control needs repair: an error occurs when the machine is turned on

Manufacturer: Engel Model: 100T / 310 E MOTION Year of manufacture: 2004 Capacity: 100 Tn

Control type: CC200 Number of hours: 8,000 hours Closing Closing force: 110 T Opening stroke: 350 mm Between columns: rotating table: 1,200 mm Plate dimensions: rotating plate: 1,200 mm Mini/maxi mold: 250 mm Max distance between trays: 600 mm Injection: Screw diameter: 18 mm Screw length: 18.7D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Closing weight: 10T Injection weight: Length dimensions: 2.62M Width dimensions: 1.68M Height dimensions: 4M Options: Bi metal: yes

Injection unit Screw diameter: 45 mm Calculated injection volume: 319 cm3 Pressure on the material: 1520 bars Closing unit Closing force: 1250 kN Dimensions of the trays: 740 x 700 mm General Heating power: 20 kW Weight: 9000 kg Other Equipment : Commissioned: 1999 Number of hours: 46241 h Tonnage: 125

Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Closing unit Clamping force [kN] 400 Dimensions of mounting plates (hxv) [mm] 510 x 535 Clearance between columns (hxv) [mm] 320 x 320 min./ max. mold height [mm] 150 injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection pressure [bar] 2050 Electric-hydraulic equipment Nominal power of the pump motor [kW] 10 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 2.5 Dimensions (L x W x H) [m] 3.30 x 1.18 x 1.67

Control type: CC 200 Number of hours: 28,100 hours Closing force: 400T Opening stroke: 1000 mm Between columns: 1300 x 1100 mm Tray dimensions: 1300 x 1100 mm Mini/maxi mold: 450 mm Max distance between trays: 1450mm Injection: Screw diameter: 55 mm Screw length: 20D cm3: 510 Bars: 2050 General: Motor power: 55kw Heating power: 12.9kw Closing weight: 29T Injection weight: Length dimensions: 8.60 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: yes Bi metal: yes Others: Magnetic plate, 6 hydraulic sequentials? Robot KUKA KR 60L30-40KS 2012

Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 230 Injection pressure [bar] 2022 Dimensions and weight Net weight with control cabinet [t] 6.8 Dimensions (length x width x height) [m] 4.82 x 1.48 x 2.01 Closing unit Clamping force [kN] 1200 Dimensions of mounting plates (hxv) [mm] 740x680

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 750x750 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 412 Injection weight [g] 392 Injection pressure [bar] 1909 Dimensions and weight Net weight with control cabinet [t] 8.8 Dimensions (length x width x height) [m] 5,800 x 1,700 x 2,400

90T Engel ES 330/70H. Used but in excellent condition with very low hours (56171). The machine was originally a 70T but it was uprated to 90T by the previous owner. Clamping Force: 90 Up-rated Screw Diameter: 35mm DBTB: 470 X 470mm Core Pull: 2 Air Circuit: 2 Please note - The hopper dryer will be removed and not included in the sale.

Engel ES 1350/275 HL ST Year of production: 1999 Injection components: Screw diameter [mm]: 60 Max injection weight PS [g]: 547 Injection pressure [bar]: 1834 Closure components: Closing force [kN]: 2750 Table plates dimensions [mm]: 1050 x 900 Min / max mold height [mm]: 350/850 Ejector stroke [mm]: 380 Control: EC100 Additional equipment: Robot: Engel ER-HLI71 Hot runners - 6 items Hydraulic cores 1 pc Pneumatic cores 1 pc Dimensions: Length / width / height [m]: 7.1 × 2.9 × 2.7 Weight [t]: 19.6 The machine is still in operation and can be inspected at the companys premises. You can make a purchase only after inspecting the machine at the companys premises

2005 model little used Very clean plastic injection machine Injection molding machine Engel Victory 500/150 Pro Tech Closing force - 150 tons Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 Injection volume - 251 ccm Min/Max mold thickness: 300 Jacks: 1 Euromap: 500/120 Moving floor movement: 507 Min/Max die height - 300/900 mm Machine weight - 9600 kg Opening path - 600 mm Injection pressure - 1302 bar Machine with robot and safety cage Injection size - 231 g Roller dimensions - 750X520 mm Oil tank capacity - 450 liters

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 bars Injectable volume: 3720 cm3 Lamination: 183 g/s Dosing stroke: 430 mm

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

Engel Victory 330/90 injection molding machine for sale. Year of production: 2009. Clamping force: 90 tons. Screw diameter 40 mm. Hours worked: approximately 60 thousand. The machine is in very good technical and visual condition. Working machine, possibility of testing on the buyers injection mold.

ENGEL VICTORY 330/110 Tech Injection moulding machine Year manufactured: 2001 Photos attached

screw diameter 55mm, max stroke volume 475 cm3, injection pressure 1179 bar, increased injection pressure 1579 bar, clamping plates 860x830mm, max mold height 700mm, max plate spacing 950mm, 146156 Mh, included in the sale and price is the manipulator ERC43/1-EA

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 850 x 750 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection pressure [bar] 2019 Electric-hydraulic equipment Nominal power of the pump motor [kW] 23 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 9.60 Dimensions (L x W x H) [m] 5.54 x 1.86 x 2.20

Engel 330/90HL injection press Year 1996 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Closing force: 50 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 20D cm3: 45 Bars: 2400 General: Motor power: 15 kW Heating power: 5.3 kw Closing weight: 3T

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Clamping force [kN] 5500 Dimensions of mounting plates (hxv) [mm] 1345 x 1280 Clearance between columns (hxv) [mm] 915 x 860 Maximum opening width [mm] 850 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1960 Injection weight [g] 1765 Injection pressure [bar] 1730

Engel 330/80 injection press Year 1990 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Manufacturer : ENGEL Model: VICTORY 200-45T Year of manufacture: 2005 Number of hours: 42500 h Closing force: 45 T Control Type: CC100 Opening stroke: 400 mm Distance between columns: 500 x 450 mm Tray dimensions: 500 x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Screw diameter: 25mm Screw length: 20D Injection volume: 69 cm3 Injection pressure: 2400 bar Motor power: 15 kW Heating power: 12 kW Closing weight: 2.9 T Dimensions length: 3.4m Dimensions width: 1.3 m Dimensions height: 1.80 m Cores: 0 robot interface Bi-metal

Closing unit Clamping force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2480 Injection weight [g] 2254 Electrical and hydraulic equipment Rated power of the pump motor [kW] 55 Heater power [kW] 62

Engel Victory 200/50 Focus Shot weight: 89 g Closing force: 500 kN Screw diameter: 30 mm Injection pressure: 1451 (2205) bar Column spacing: No columns Plate size: 450 x 500 mm Type of control: EC 200 Language: German, Other Installed power: 31 kW Working hours: 79,044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m A string of cores

INJECTION UNIT Screw diameter: 45 mm Pressure on the material: 2400 bars CLOSING UNIT Closing force: 1800 kN Mold thickness Mini / Max: 250/600 mm Passage between columns: 580 x 580 mm Tray size: 780 x 780 mm With 1 hydraulic unit

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw