Model
(Manufacturer: HOMAG)
Manufacturer: Homag, Type: 2 Achser HC 010 o.Analogeingang, Model: 2-Achser F.mini-Controller Rev, Serial number: 2-083-02-8071,
Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,
Hersteller : Senotec Füllstandsensor, Spare part from machine: Homag, Type: 4-008-40-0144, Serial number: 0-220-54-8330,
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,
Manufacturer: Homag, Type: CPU PC Controlleinheit, Model: 5003, Serial number: 2-083-01-6902,
Manufacturer: Homag, Type: Homatic Achskarte, Model: Servo 4 Achser, Serial number: 2-083-02-8075,
Manufacturer: Homag, Type: Homatic Streckenprozzesorkarte, Model: 2-083-02-7013,
Manufacturer: Homag Ausgangskarte , Model: HC 020 2 us o RC Glied, Serial number: 2-083-01-5203,
Manufacturer: Siemens Elektronikkarte 03410, Type: 3818, Model: 548 229 9001, Serial number: A 8605 590 700,
Manufacturer: Homag Siemens Achskarte Drehgeber, Type: ser 8808 B, Model: Drehge. Interface,
Manufacturer: Homag Getriebe Verstellung Oberdruck/Maschinenhalter Bett, Type: auf KF Homag, FREETEXT1: 3 Verstellgetriebe, FREETEXT2: 4 Winkelhalter Bett,
Manufacturer: Kraft-Homag-Viet, Beabeitung: Rohlinge Kaliberieren-Formatieren-<CRLF>Fälzen und Kaliberieren, Herstellung von: Innentüren, Work piece width min-max mm: 1300 X 2200, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 50-2200, Manufacturer1: Bargstedt, Machine type1: Beschickungsanlage doppelseitig, Year of manufacture1: ca 2000, Manufacturer2: Viet Kalibrieranlage, Machine type2: 4 Aggregate Walze/Schuh, Year of manufacture2: ca.1998, Manufacturer3: Homag Doppelendprofiler, Machine type3: Längsprofilerer, Year of manufacture3: Überholt 2004,
Manufacturer: Homag, Type: 20/50/16/V/G, Year: 1998, Control: Homag, Program: WoodWop , Program version: 5.0, Working range X: 5.600, Working range Y-axis: 1.600, Working range Z: 60, Number of milling spindles: 1, Milling engine 1 hours power: 12, Number of tool magazines: 1, Number of tools per tool-magazine: 12, Vertical drills-X: 5, Drill vertical Y: 4, 2 station allocation: 2, raster table: yes, Vacuum pumps Qty: 2, Saw unit: yes, Edgebanding unit: yes, Year :1998
Manufacturer: Sergiani-Bürkle-Holtkamp, Type: Herstellung Türrohlinge, Year: 2008, Herstellung von: Herstellung Türrohlinge, Maschinensteuerung: Übegordnet, Work piece width min-max mm: 1200 X 2200, Min.-max. workpiece height in mm: 35-60, Machine type1: Beschickugsanlage Sytematic, Manufacturer2: Bürstenalage Bürkle, Machine type2: Scheibenrollenbahn Bürkle, Manufacturer3: Scheibenrollenbahn Bürkle, Manufacturer4: 4 Walzenleimaufttragsmaschine Bürkle, Machine type5: DAK 1300, Manufacturer6: Sytematic, Machine type6: Belegestation , Manufacturer7: Sytematic, Machine type7: Aufgabestation Rahmen und Füllung, Manufacturer8: Sytematic, Machine type8: Winkelübergabe, Hersteller9: Sergiani, Maschinentyp9: 10 Etagenpresse, Hersteller10: Aulauftransport Sergiani, Year :2008
Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004
Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging supp ...
Manufacturer: Bohrgetriebe, Stück Bohrgetriebe : 1, Number of drilling spindles: 13, Grid 32 mm: yes,
Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,
Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...
Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002
Manufacturer: Homag Eltec Steuerkarte, Type: Hmag-2/mit ACR 1 Ausgang, Model: CPU 30 E16-103 4 MB 25 Mhz ohne Grafik,
Manufacturer: Eltec Homag Karte, Type: Karte Seco 6 X RS 232, Model: Schnittstellenkarte, Serial number: 4-086-05-038,
Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005
Manufacturer: Homag Eltec , Model: Convertierungskarte CPU30/16 auf 4 X RS, Serial number: 4-086-05-0241,
Manufacturer: Homag Transportrollgang mit angetriebenen Anschlagriemen, Year: ca.2005, Control: yes, Working length mm: 3500, Working widht mm: 2050, Engine power kW: 1,5, Feeding speed min-max m/min: 10-40, Durchmesser Rolle mm: 50, Rollenmittenabstand: 70, angetrieben über Zahnriemen: Flachriemen, Anschlaglineal verstellbar: Transportriemen, Anschlagkante Höhenverstellbar: yes, Schrägstellung der Rollen (Durchgehend): yes, Beschichtung: Gummi, Own controller: yes, Total hight mm: 980 +-, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :ca.2005
Manufacturer: Homag, Type: Diskettenlaufwerk und Festplatte, Year: 1996, FREITEXT1: aus Maschine KF 20, Year :1996
Manufacturer: Homag Floppy Diskettenlaufwerk und Festplatte, Type: 3,5 HD 52 MB, Serial number: 2-083-03-0019,
Manufacturer: Homag Doppelspindelfräse 4 Achsmaschine, Type: BMG 512, Control: Woodwoop 6.0, Min.-max. workpiece length in mm: 4500, Min.-max. workpiece height in mm: 1600, Aluminium processing: 300, Throuh running machine: yes, Feeding speed max m/min: yes, C axis: 2, B-axis: HSK 63, Pendulum processing: ca.12, Work piece width min-max mm: 1800-24000, Min.-max. workpiece length in mm: ca.12, Horizontal: 1, Number of milling spindles vertical: 14, rpm 1): 9, Milling engine 2 hours power: 6, rpm 2): 2, Number of tool changers: 2, Kettenwechsler: yes, Pickup Wechlser: yes, Working widht max mm: 6, Horizontal drills-X: yes, Belt conveyor: yes, Number of tables: yes, Traverse table: 120, Aluminium sleeking table: Automatisch, roller table: 16, 2 station allocation: yes, Stops in the table rear: yes, Drill vertical: yes, Edgeband hight mm: yes, Magazine Qty: no, Schnittstelle DXF: ink.Werkze ...
Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000
Manufacturer: Homag, Type: Schwabbelaggregate, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Oszilierend : yes, Motorenanzahl: 2, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Year :1996
Description: Maximum 15,000 rpm, series no. PCB: 0193.03.06, without additional accessories Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 10 kg
Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg
Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  , serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, pro ...
Description: HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION Approx. Onsite Dimension. (l x w x h): 700 x 500 x 500 mm, weight approx.: 30 kg
Description: HSK63 LOCK CASE D=16 MM 2 SPINDLES Approx. Onsite Dimension. (l x w x h): 800 x 500 x 500 mm, weight approx.: 10 kg
Description: Max. rotational speed 5000 rpm Serial number 4-21978 without further accessories Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 8 kg
Description: serial number: 0-201-06-0390 Technical specifications: 3 axes + axe 'C' vertical milling motor 7,5kW, HSK F63 drilling head with 11(X) + 6(Y) vertical spindles and 4 horizontal spindles (2 on X axis and 2 on Y axis) tools magazine HSK - 30 positions 8 bridges L=1340 mm, with 16 suction cups 4 pneumatical clamps for fixing narrow pieces 4 loading aids vacuum pump Becker 100 m³/h + vacuum pump 2BL2101 (80m³/h) working table: 4000 x 1300 mm axis travel: X=4900mm Y=1800mm Z=280mm waste disposal belt security belt in front of the machine (3 parts) perimetral protective fence total connection: 17 kW software: woodWOP NC control: power control PC85 CE mark without tools vacuum pump: 100 m³/h, serial number: 0-201-06-0390, toolchanger positions: 30, total electrical load: 17 kW, 5-axis machining: No, Number of vacuum pumps: 2 pieces, Integrated C-axis: ...
Description: • Horizontal panel saw • Serial number 0-341-03-0163 • Total installed power 14 KW • Cutting width 3200 mm • Cutting depth approx. 3200 mm • Cutting height approx. 50 mm • 5 Grippers • Main saw blade: max. diameter 300 mm and motor 5.50 KW, rotation speed 4550 rpm • Scoring saw blade: max. diameter 150 mm and motor 0.55 KW, rotation speed 5100 rpm • Saw carriage feed speed: 6 - 32 m/min • Saw carriage return speed: 32 m/min • Pushers feed speed: 18 m/min • Front air tables: one fixed of dimensions 1800 x 600 mm and 2 movable of dimensions 1800 x 600 mm • Control CNI VIC 800 Approx. Onsite Dimension. (l x w x h): 5,250 x 6,200 x 2,070 mm, weight approx.: 4,000 kg
Description: Total connected load 12 kW Workpiece length 200 - 2500 mm Workpiece width 70 - 850 mm Workpiece thickness 10 - 60 mm serial number: 0-250-05-4772, total electrical load: 12 kW, software: WoodWob5, Approx. Onsite Dimension. (l x w x h): 2,950 x 1,540 x 1,895 mm, weight approx.: 1,450 kg
Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  , edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg
Description: Min. edge thickness 0.3 mm Max. edge thickness 3 mm , Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 3 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , glue pot for EVA hot melt glue premelter for EVA hot melt glue , Roller set to press the edge no. pressure roller 7 with positioning by NC , No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.8 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.5 KW r.p.m. : 12000 RPM , NO. EDGE PROCESSING UNITS 3 Processing Unit : Corne ...
Description: Type of edging Thin edge Thick edge Solid wood Gluing System PUR Premilling Unit yes Corner Rounding Unit yes Grooving Unit yes Max feed speed 24 m/min Maximum panel thickness 60 mm Operating Units 9 nr Min. panel height 12 mm Max. panel height 60 mm Min. edge thickness 0.4 mm Max. edge thickness 20 mm Max. forward feed speed 24 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes premelter for PUR glue NORDSON Roller set to press the edge yes with positioning by NC yes No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top a ...
Description: Total processed length: 205,152 m Operating voltage 400 V Frequency 50 Hz Working width min. 10 mm (with tool diameter 125 mm) Workpiece width after processing min. 10 mm and max. 250 mm Working height min. 10 mm (for tool diameter 125 mm) Workpiece height after processing min. 10 mm and max. 160 mm Control: powerControl with Powertouch MOULDTEQ M-300 Feed: Feed system - 6 spindles Feed speed 24 m/min infinitely adjustable via powerTouch Feed speed min. 6 m/min and max. 24 m/min Maximum tool weight 22 kg with CE certificate and documentation without tools 1. spindle: 7.5 kW, 2. spindle: 7.5 kW, 3. spindle: 7.5 kW, 4. spindle: 7.5 kW, 5. spindle: 7.5 kW, 6. spindle: 7.5 kW, serial number: 0-254-11-2760, planing width: 250 mm, planing height: 160 mm, length of surfacing-table: 2,500 mm, number of spindles: 6 pieces, feed: 24 m/min, Approx. Onsite Dimension. (l x w x h): 4,800 ...
Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg
Description: Type of edging Thin edge Thick edge Gluing System PUR Combination Squaring Edgebanding Machine First Pass Max Panel Width 3000 mm Max feed speed 40 m/min Operating Units Right Side 10 nr Operating Units Left Side 10 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 240 mm Max. panel width 3000 mm Min. edge thickness 0.4 mm Max. edge thickness 3.5 mm Max. forward feed speed 40 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units Left Side 1 NO. PANEL SIZING / MILLING UNITS LEFT SIDE 1 Unit : double chipper, top and bottom Constructor model : KD 11 motor power : 4.5 KW r.p.m. : 6000 RPM Same technical characteristics on the left side yes Edge coil magazine yes no. positions 12 Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes Roller set to press the edge yes No. Edge Processing Units 8 ...
Description: Control voltage on: 35'849 h Main spindle BE1: 23749 h Boring head BE1: 3709 h Drill head: 17 spindles Main spindle: 18.5 kW controlled Chain changer 30-fold HSK F63 Speed range 0-18'000 rpm Drilling head 35 spindles vertical, for automatic changing into the main spindle Control system was converted in 2014: RECHNER IPC 5.11.0.0 WITH DVD, Industrial PC IPC 5.11 from Eltec with Windows XP operating system, hardware: Industrial PC Intel Core 2 Duo E8400 3.0 GHZ, working memory 4 GB RAM, 2 COM interfaces RS232, internal DVD-ROM drive, 1 fixed hard disk with 250 GB, 1 USB hard disk for data backup, 4 USB ports, Ethernet network connection with EC Declaration of Conformity Series no. 0-201-19-1527 without tools or units and without vacuum pump ( central vacuum system ) Translated with DeepL.com (free version) working width y-axis: 1,600 mm, working height z-axis: 950 mm, work ...
Description: Powerful CNC machining centre equipped with: 2 pcs. main spindles, each with C-axis one of them with Flex-5 interface, 2 x 11 kW - HSK 63 drilling unit with 25 drilling spindles and groove saw 0/90° 2 pcs. 10-fold tool changers 2 console-tables for pedular processing and 4-fold processing max length of workpiece 3740 mm, while pedular processing 1830 mm, while 4-fold processing 700 mm max width of workpiece 1600 mm for processing with milling tool diameter of 25 mm, 1300 mm for all aggregates stop pin for workpieces with overhang of top layer LED positioning system vacuum loader Homag TBP 370 Traverse length approx. 13 metres Installation height from floor 1300 mm with 8 vacuum cups (130 mm and 100 mm diameter) new vacuum pumps in 2023 for further technical details please have a look at the pdf file (German language) working width y-axis: 1,600 mm, working l ...