- 0,23kW 18000U/min(2)
- 0-380-03-0497(1)
- 1 MB RAM und PC Cobtroller(1)
- 1-005-15-0020(1)
- 1-005-16-0000 D(1)
- 1-007-34-0001(1)
- 1-026-26-0030(2)
- 1-055-12-0050(2)
- 1-056-11-0400(1)
- 1545/500/H361 mm(1)
- 1555/500/H272 mm(1)
- 1558/295/H280 mm(1)
- 1600/295/H278 mm(1)
- 1715/370/H342 mm(1)
- 1958/295/H276 mm(1)
- 2 Achser HC 010 o.Analogeingang(2)
- 2-083-01-5003(1)
- 2-083-01-5004(1)
- 2-083-01-5101(1)
- 2-083-01-5102/5103(1)
- 2-083-01-5105(1)
- 2-083-01-5201(1)
- 2-083-01-5202(1)
- 2-083-01-5203(1)
- 2-083-01-5403/04(1)
- 2-083-01-5404(1)
- 2-083-01-5405(1)
- 2-083-01-5406(1)
- 2-083-01-5406/07(1)
- 2-083-01-5408(1)
- 2-083-01-5800(1)
- 2-083-01-5903(1)
- 2-083-01-5905(1)
- 2-083-01-6303(1)
- 2-083-01-6902(1)
- 2-083-01-8100(1)
- 2-083-02-7006(1)
- 2-083-02-7013(1)
- 2-083-02-7022(1)
- 2-083-02-7106(1)
- 2-083-02-7420(1)
- 2-083-02-7921(1)
- 2-083-02-8075(1)
- 20/30/12/G(1)
- 20/50/16/V/G(1)
- 2004 neugewickelt(1)
- 2083015407(1)
- 2083027407(1)
- 211 Venture 22 L(1)
- 3,5 HD 52 MB(1)
- 310/9/A20/S2(1)
- 3240/295/H280 mm(1)
- 3575/295/H275 mm(1)
- 3818(1)
- 4 Motoriges Kopieren(1)
- 4,4kW 2860U/min(1)
- 4-00570(1)
- 4-008-39-0001(1)
- 4-008-39-0002(1)
- 4-008-40-0144(1)
- 4-02078(1)
- 4-060-24-0165(1)
- 4-075/02/0036(1)
- 4-075/02/0038(2)
- 4-086-05-0113(1)
- 4-086-05-0262(1)
- 480/1210/H290 mm(1)
- 5 Fach(1)
- 8 Fach Wechsler(1)
- 83.51(1)
- 83.56(1)
- 83.65(1)
- Anschlag System(1)
- auf KF Homag(1)
- aus KFL 10(1)
- Ausgangskarte(1)
- Ausgangskarte 16x220V(1)
- Bandbreite mm(1)
- BARGSTEDT TBH22/D/25/12(1)
- BAZ 20 - 50 -12(1)
- BAZ 20/50/16/V/KA(1)
- BAZ 41/K OPTIMAT (1)(1)
- BAZ20/50/16/K(1)
- BHX 050(1)
- BHX 200/D(1)
- BMG 512(1)
- BOF / BAZ20/50/18/2/D(1)
- BOF 311 Venture 15L(1)
- BOF 311/40/21/r WORKING CENTER(1)
- BOF 32/30/K(1)
- BOF 41/K Optimat(1)
- BUS 3-15/30-30-004(1)
- CH 03 32 32 PLUS(1)
- CPU HC020 SPS II(1)
- CPU Karte(1)
- CPU PC Controlleinheit(1)
- CPU Umlade-RAM 512 I/O(1)
- DA-10-2(1)
- Diskettenlaufwerk und Festplatte(1)
- Drehgeber für Strecke(1)
- Drilltec V-200 Optimat BHX055(1)
- DRILLTEQ V500(2)
- Druckzonenrevolver(1)
- EDGETEQ S-500 KAL370 Ambition(1)
- Ein und Ausgangskarte(1)
- Ein und Ausgangskarten Streckensteuerung(1)
- Eingabeeinheit mit LCD Anzeige und Tastatur(1)
- Eingangskarte(1)
- Eingangskarte 32x24V(1)
- F5(1)
- FKR 78/C/A/S3(1)
- FL 20/05/25 - TD 31/30/13 - FL 64/30/II+1000(1)
- FL 20/06/30/S(1)
- FL 20/07/15/S(1)
- FL 62/25(1)
- Flex 5(1)
- Formfräsen / contour milling(1)
- Formsttrecke(1)
- FPL620/06/15/P S/LQ(1)
- FS 11/FS 10(1)
- Genius 20/50/14/G(1)
- Genius 20/50/16/V/G(1)
- GENIUS BAZ 20/30/14/3/D(2)(1)
- Größe 10930/500/H262 mm(1)
- Größe 11370/498/H240 mm(1)
- Größe 2525/498/H268 mm(1)
- Größe 2925/494/H447 mm(1)
- Größe 4050/498/H268 mm(1)
- Größe 7550/460/H196 mm(1)
- Größe 9090/460/H350 mm(1)
- HD SCSI 10TE CPU 30(1)
- Herstellung Türrohlinge(1)
- Hmag-2/mit ACR 1 Ausgang(1)
- HO0028895(1)
- Homatic(8)
- Homatic Achskarte(1)
- Homatic Steuerung Ausgangskarte(1)
- Homatic Streckenprozzesorkarte(1)
- Homatic Streckenprozzessor(1)
- Hubschwingen für schwere Teile(1)
- JOKER BAZ 41(1)
- K 11/13(1)
- KAL 210 AMBITION 2264(1)
- KAL 210/7/A20/S2(1)
- KAL 211 Ambition 2274(1)
- KAL 310(1)
- KAL 310 310/6/A3/S2(1)
- KAL 310/7/A20/S3(1)
- KAL 310/7/A3/S2(1)
- KAL 310/8/A20/S2(1)
- KAL 310/9/A20/S2(2)
- KAL 330/6/A3/S2(1)
- KAL210 AMBITION 2264(2)
- KAL210 AMBITION 2264 - ZHR 05/L/085(1)
- KAL211 EDITION 2264(1)
- KAL310/8/A20/S2(1)
- KAL330(1)
- Karte Seco 6 X RS 232(1)
- KF 20/13/QA/10 + KF 20/15/25/QA(1)
- KF 20/20/QA/15(1)
- Kf 62(1)
- KF66/17/6A/10(1)
- KFL 10/42/QE/S(1)
- KFL 54/KFL 53(1)
- KFR 21 und KFL 21 inkl.Winkelübergabe(1)
- KFR20/16/QA/15-TWR24/30/12/S-KFR20/19/QA/25(1)
- KL 10/18/QA(1)
- KL 10/21/QA(1)
- KL 78/A20/S2(1)
- KL 79(1)
- KL 79/2/A20/S2(1)
- KL77/A20(1)
- KLO 76(1)
- Konvertierungskarte CPU/30/E16 4 x RS(1)
- LF-40-C-KA(1)
- LF-40CKA(1)
- LF-55 CKA(1)
- LF-55-C-KA(1)
- LF-55-C-ST(1)
- LF-55-L(2)
- LF-55-L-KA(3)
- LF-55CST(2)
- LF-64-C(2)
- LF-64-L(1)
- LF-64L(1)
- MAC93C-0-FS/4HC/110-A-0(1)
- mit 2 Perske Motor(2)
- mit 2x Perske Motoren(2)
- mit 3 Perske Motor(1)
- mit Fügefräsaggregat(2)
- mit Gummiprofil(1)
- mit langer Welle(4)
- mit Oszillation(4)
- mit Perske Motor(8)
- mit Perske Motoren(14)
- mit Polierbürste(1)
- Mouldteq M-300 Fenster(1)
- Nachputzeinrichtung Leimfuge(1)
- NC 20(1)
- NFL 26/6/10/PW/L(1)
- O KAL 210/6A20/S2(1)
- Optimat BAZ 232/40/K(1)
- OPTIMAT BAZ 31/60/K(1)
- Optimat BAZ 311/40/K(1)
- Optimat BAZ 311/52/K(1)
- OPTIMAT BAZ 311/60/K(1)
- Optimat BOF / 40 / G(1)
- Optimat BOF 211/52/K(1)
- OPTIMAT BOF 211/VENTURE 12L(1)
- OPTIMAT BOF 612/34/13/2 K(1)
- OPTIMAT JOKER BAZ 41(1)
- OPTIMAT KAL 310/6/A3/S2(1)
- Optimat KAL 310/9/A20/S2(1)
- OPTIMAT LPP306(1)
- P KF 20/24/QA/30(1)
- PC Steuerung Ausgangskarte(2)
- PN10(1)
- Pneumatische Mittenunterstüzung(1)
- Power FL 14/10/12/CF(1)
- Power FR 20/09/15/L/Q1(1)
- Profi BAZ/20/40/14/3/KA(1)
- PS10(1)
- PSE 4225 DP-M(1)
- Putzaggregat / buffing unit(1)
- Q 34(2)
- Quickmelt(1)
- R2 Radius HSK63(1)
- Rechnerkarte(1)
- Ritzmotor FPL 526(1)
- Ritzsäge Nachschwenkeibrichtung für lin(1)
- Rollendruckzone(1)
- Rollenlänge 120 mm(1)
- Schlosskastenaggregat(1)
- Schnellwechselköpfe FK 11 / FK 13(1)
- Schwabbelaggregat / Buffing unit(1)
- Schwabbelaggregate(1)
- ser 8808 B(1)
- SEW(1)
- SPS II 12 MHz 1MB RAM(1)
- Streckenprozessor(1)
- Streckenprozessor 4 Achser(1)
- SV.5.430/2(1)
- TD 12 / 25(1)
- Teile von KF Maschine(1)
- Transportband(1)
- UPTIMAT BAZ 32/50/G(1)
- verstellbar(3)
- Verstellweg 100 mm(1)
- VFL 75(1)
- VFL 79/02(1)
- VFR10/22(1)
- xxx(1)
Model
(Manufacturer: HOMAG)
New in: 2005
used
9.500 € Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle: ...
New in: 2008
used
7.400 € Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm ...
used
90 € Description: max. 12000 rpm Teilenummer 1-017-95-1741 without further accessories Approx. Onsite Dimension. (l x w x h): 150 x 150 x 250 mm, weight approx.: 10 kg
New in: 2009
used
Description: - Workpiece length , All units max. approx. 5200 mm , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width , Rear stop for all units max. approx. 1400 mm , Rear stop cutter 25 mm max. approx. 1550 mm , Front stop for all units max. approx. 1150 mm , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...
New in: 2007
used
Description: - Inlet ruler with automatic adjustment and extension 500 mm - BONDING PART A20 BASIC - Pressure zone C with automatic adjustment - Release agent spray unit - Pre- and profile milling unit with pneumatic adjustment - Edge sanding unit KS10 - Profile sanding unit top/bottom PS41 / PS42 edge magazine with: 2 -fold roller, serial number: 0-200-21-6055, edge thickness: 0,3 - 3 (20) mm, workpiece thickness: 8 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 25 m/min, joint trimming unit: 2 x 3 KW, gluing unit: A20/QA34/C, snipping unit: HL84 (2 x 0,8 KW), rough trimming unit: 2 x 1,5 KW, fine trimming unit: 2 x 0,4 KW, profile trimming unit: FF12 (4 x 0,4 KW), edge sanding unit: KS10 / PS41 / PS42, flat scraping unit: ja / yes, profile scraping unit: MN21 automatic, edge buffing unit: ja / yes, control: Power Control PC 22, return system: Nein / No, Approx. Onsite Dimension. (l x w ...
used
Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece
used
Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5406/07 -Type: 2083015406/07 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.31 kg
used
Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -without: drive motors -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with: oscillation -Swiveling -Number: 3x units available -Price: per piece -Dimensions: 400/160/H225 mm -Weight: 5.7 kg
used
Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5102/5103 -Type: 2083015102/5103 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg
used
Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 83.51 -Type: 83 51 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.275 kg
used
PC-CPU, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: PC-CPU-2-083-01-5003 -Type: PC-CPU 2083015003 -Number: 1x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg
used
Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5905 -Type: 2083015905 -Number: 1x control cards available -Price: per piece -Dimensions: 130/365/H30 mm -Weight: 0.58 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: volts -Frequency: Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 520/470/H600 mm -Weight: 64 kg
used
Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece
used
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x motor Perske -with long shaft -Motor type: KNS 70.12/2 D1 -Power: 3.0/4.4 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2870/5880 rpm -1x motor Perske -with long shaft -Motor type: KNS 70.14/4D1 -Power: 3.7/6.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2850/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/1300/H1400 mm -Weight: 550 kg
used
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 KNS 51.15.20 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/1100/H1200 mm -Weight: 625 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1200 mm -Weight: 300 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -with long shaft -Motor type: KNS 70.12-2DF -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz Speed: 2870/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1250/1350/H600 mm -Weight: 400 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/1000/H1200 mm -Weight: 600 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70.12/2.01 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/600/H1250 mm -Weight: 280 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12-2DF -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1000 mm -Weight: 300 kg
used
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: you can rebate, groove and profile -with keying: from 2 sides each -Milling unit: swiveling -1x engines Perske -Power kW -Voltage: volts -Frequency: Hz -Speed: rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/520/H600 mm -Weight: 80 kg
used
Multiplexer, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: Homag Homatic -Type: 2-083-02-7921 -Type: 2083027921 -Number: 2x control cards available -Price: per piece -Dimensions: 130/340/H30 mm -Weight: 0.28 kg
used
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg
used
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 1558 x 295 mm -Table thickness: 20 mm -Dimensions: 1558/295/H280 mm -Weight: 166 kg
used
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 278 mm -Table surface: 1600 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1600/295/H278 mm -Weight: 170 kg
used
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 276 mm -Table surface: 1958 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1958/295/H276 mm -Weight: 208 kg
used
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 3240 x 295 mm -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3240/295/H280 mm -Weight: 330 kg
used
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg
used
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 275 mm -Table surface: 3575 x 295 mm -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3575/295/H275 mm -Weight: 356 kg
used
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 4050 mm -Height of table surface: 268 mm -Working height: 268 mm -Price: per piece -Number: 2x available -Transport dimensions: 4050/520/H268 mm -Weight: 764 kg / 828 kg
used
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 500 mm -Length of the table surface: 10930 mm -Height of table surface: 262 mm -Working height: 262 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2020 kg
used
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft holder: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg
used
Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the table surface: 11370 mm -Height of table surface: 236 mm -Working height: 236 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2200 kg
used
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.23 kW 18000 rpm at 300 Hz -Weight: 2 kg
used
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft holder: Ø 15 mm L 25 mm -Number: 5x motors available -Price per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg
used
Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg
used
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Shaft holder: Ø 20 mm L 25 mm -Weight: 3 kg
used
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.125 kW 18000 rpm at 200 Hz -Voltage: 165 volts -Take shaft: Ø 15 mm -Dimensions: 320/75/H160 mm -Weight: 6 kg
used
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg
used
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg
used
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.125 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 15 mm -Dimensions: 320/75/H160 mm -Weight: 6 kg
used
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The four-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the workpiece front and rear edge above and below -4x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Weight: 374 kg
used
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/600/H1330 mm -Weight: 346 kg
used
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: KCS 71.16-2 D -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/960/H600 mm -Weight: 470 kg
used
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 272 mm -Table surface: 1555 x 300 mm -Table thickness: 18 mm -Dimensions: 1555/500/H272 mm -Weight: 190 kg
New in: 1994
used
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/500/H600 mm -Weight: 54 kg
New in: 1994
used
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Weight: 64 kg
