used index cnc turning centers

Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...

Index GFG 450, Built in 1996, Control Index C 200 - 4, Travel X/Z 430/545 mm, Circulation Ø over bed carriage max. 425 mm, Bar passage 100 mm, 2 revolvers 8-speed / 6-speed, turret 1 powered tools, Recording VDI 50 , C axis 0.001°, Conveyor 4-stage transmission up to 2,250 rpm, Three-jaw chuck 315-82, Full-clamping cylinder OVS 150, Accessories

Index G 400 Turning - Milling Center, Year of manufacture 2001, Control index C 200 - 4 D, Travel X/Y/Z 600/220/2000 mm, Requested. Tools C axis, Revolver 12-speed, NC milling spindle B axis, HSK 63 , Spindle speed up to 6,000 rpm, Scheibenmaagzin 32-fold, Bar passage up to 102 mm, Lunette Conveyor Suction inlc. Tubes Rotoclear,

Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

work travel: X:320 & Z:1250 mm rapid traverse: X:20 & Z:40 m/min control: INDEX - C200-4D --- MOTOR MILLING SPINDLE ---: ------------------------- tool taper: HSK A63 turning speeds: 12000 U/min Power: 27,5 KW front bearing: 80 mm turning speeds: 3000 U/min MAIN SPINDLE D102 direct drive: ------------------------- spindle diameter in front bearing: 1200 mm spindle passage: 102 mm forward bearing diameter: 170 mm CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete) The machine is completely upgraded

- Control: Sinumerik (Index C200-4D) - Rod passage 65 mm - Speed 5000 1/min - Turret 1 with 8 stations (all driven), incl. synchronous spindle - Turret 2 with 6 stations (all driven) - Revolver 1/2 travel: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Back processing 5 Rear Drilling Stations - C axis -Conveyor Machine weight approx. 3000 kg Footprint including control cabinet and chip conveyor: LxWxH: 3430 x 1240 x 1750 mm Loading magazine: INDEX MBL Weight: approx. 2,000 kg Dimensions LxWxH: 4500x1100x1500 mm

Curve lathe INDEX B60 - not complete - as spare part dispenser - see pictures

Curve lathe INDEX ER60 - see pictures More: turnover machine MANURHIN Traminer TR22B

Bendless automatic lathe make INDEX type E 60Fabr. -No: E 6072107 Year 1972largest material passage: 60 mmChuck diameter: 136 mmmax. thread diameter: M 30 / M 24Speed range: 134 - 2420 rpm.Working distance: 80 mmRapid traverse path: 50/62 mmlargest longitudinal path: 80 mmDistance quill to collet: 60 - 230 mmFeed infinitely variable: 5 - 3400 mm / minDrive power: 5.5 kWDimensions L x W x H: 1510 x 850 x 1500 mmWeight approx. 2000 kgWith- bar feed- various change wheels- hydr. Power Chucks- long turning device- Copy machine Fabr. SauterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single spindle lathe make INDEX type ER 25Mash. -No: 25751408max. workpiece passage Drm.:25 mmxa0xa0xa06-edge: 21 mmxa0xa0xa0Square: 16 mmmax. workpiece feed p. Circuit: 70 mmmax. thread diameter: M 16 / M 14Speed range: 14 - 5750 rpm.Number of automatically switchable speeds: 4Number of overdrive speeds: 26Number of slow speeds: 234Turret diameter: 120 mmTool holder cone: 3/4 Turret processing: 60 mmDistance collet - Turret: 60 - 150 mmFeed rate infinitely variable: 16 - 2800 mmFeed rate continuously variable: 40 - 7000 mm / minRapid forward / backward: 10/25 m / minSwitching time: 0.75 sCross slide travel: 44 mmLongitudinal adjustment of the upper slide: 20 mmContinuous feed of the cross slide: 5 - 1000 mm / minDriving power: 4 kWDimensions L x W x H: 1900 x 1020 x 1650 mmWeight approx: 1650 kgWith- 8-fold revolver- 2 vertical parting carriages- 2 horizontal cut-off slidesused, in very ...

Inv. Num. : 6160 Type: GE 42 NC Producer: INDEX Generated: Parameters: Control system: Siemens Maximum turning length: 360 mm turning diameter: 300 mm Minimum spindle speed: 31.5 1/min Maximum spindle speed: 6000 1/min Total power requirement: 35 kW Equipment: Bar loader

Index G200 bar lathe :::SPECIFICATIONS::: CNC Model: Siemens CNC version: Index C 200 - 4 Main spindle nose: ASA 6 Main spindle bar clearance: 60mm Turning diameter: 150mm Turning length: 400mm Main spindle revolutions: 5000 Number of Tool Turrets: 1 Number of tool places before turret: 14 Number of motorized first turret: 14 First turret tool attachment type: VDI 25 X axis travel first turret: 155mm Y axis travel first turret: +-60mm Z axis travel first turret: 400mm Model and brand bar magazine: LNS Hydrobar L 3000 mm Tailstock: yes Positioning: automatic Chip evacuator: carpet Other technical data: The tailstock has a programmable axis Machine equipment: Rich equipment: Motorized and fixed tool holder sets Hainbuch pliers Self-centering forkardt :::D IMENSIONS AND WEIGHT::: Weight: 4800Kg

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

Automatic ring lathe from Keul - Rotary Ø: 1.0 - 8.0 mm - Gripping and swivel device - Part discharge position 1 - Machining unit position 1 - Roll straightening unit -Conveyor - Reel Ø 1200 mm, 1,000 kg

Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 400 mm control: C 200 / 8 total power requirement: 60 kW weight of the machine ca.: 8,5 t Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features * SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. * Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. * Spindle indexing ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840C Technical data Number of spindles: 2 Number of revolvers: 2 Spindle hole: 65 mm Turning diameter: 200 mm Turning length: 400 mm Turret slide: Number of positions turret 1: 14 Number of positions turret 2: 14 Driven tools turret 1: 14 Driven tools turret 2: 14 Spindle speeds: 6000 rpm Power of driven tools: 5.5 kW Inner cone DIN: 69 880 Indexing time: 0.4 sec Upper turret head: X axis: 155 mm Y axis: 120 mm Z axis: 400 mm Lower turret head: X axis: 105 mm Z axis: 400 mm Main spindle:: HAINBUCH Internal spindle diameter: 60 mm Spindle speeds: stepless up to: 6000 rpm Back spindle:: HAINBUCH max. speed: 6000 rpm Internal spindle diameter: 60 mm Spindle diameter: 160 mm Back spindle stroke: 445 mm Rapid traverse X: 22.5 m ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of spindles: 2 Number of revolvers: 2 Spindle hole: 65 mm Turning diameter: 200 mm Turning length: 400 mm Turret slide: Number of positions turret 1: 14 Number of positions turret 2: 14 Driven tools turret 1: 14 Driven tools turret 2: 14 Spindle speeds: 6000 rpm Power of driven tools: 5.5 kW Inner cone DIN: 69 880 Indexing time: 0.4 sec Upper turret head: X axis: 155 mm Y axis: 120 mm Z axis: 400 mm Lower turret head: X axis: 105 mm Z axis: 400 mm Main spindle: Internal spindle diameter: 60 mm Spindle speeds: stepless up to: 6000 rpm Back spindle: max. speed: 6000 rpm Internal spindle diameter: 60 mm Spindle diameter: 160 mm Back spindle stroke: 445 mm Rapid traverse X: 22.5 m/min Rapid traverse Z: 45 ...

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition