maximum number of results exceeded > 1000
please refine your search
Model
(Manufacturer: LIND)
Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...
Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops ...
UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden
Storage Tank in V2A for wine, water, fruit juice, schnapps Capacity: approx. 1.200 liter Measurement: Total Height: 1730 mm Depth: 1150 mm Cyl. depth: 1000 mm Width: 730 mm Material: V2A Surface: Outside marbled, 2B=IIIC inside 2B=IIIC Upper body: With thread connection DN 50 Cylinder tank: With 1 manhole With level indicator with bar and scale Lower bottom: With outlet pipe pulled forward with butterfly valve DN 32 With 4 stable feet
Cat. No. 11-1040 New For liquid with a density of 1350 kg/m3 Material: V2A - AISI 304, 1.4301 Surface: Ground Upper and underbody: Klöpperboden Cylinder body: with flange DN 100 with sight glass with rupsing disc with CIP line with spray head through. 90 mm made of V4A with cable for spunding machine DIN 40 with side manhole 509 x 372 mm with low-screw shut-off valve for residual and clear drain with digital thermometer with residual drain line through m. 2"1/2 with ladder bracket with transport eyelets height-adjustable with 4 calotte feet Technical data Dimensions (mm) Total height inside: 1592 mm Dia. inside: approx. 4600 mm Total height outside: 4605 mm Dia. outside: --- Roof 426 mm height 3.0 mm thickness Cylinder 3000 mm height 2.5 mm thickness Underbody 426 mm height 3.0 mm thickness Feet 600 mm hei ...
Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN ...
Storage tanks / transport tanks with cooling jacket made of V2A NEW TOTAL LIST Content: 700 litres, 900 litres, 1100 litres Cat-No.: Content Liter: 20-00009L-1 700 20-00009-2 900 20-00009-3 1100 Material: V2A - AISI 304, 1.4301 Surface: outside marbled III C Tank top: with 4 x crane eyelets with threaded welding nozzle DN 40 with thread DN 150 Tank cylinder: with manhole front 530 x 420 mm with cooling jacket Underbody: with residual drain DN 50 (disc valve DN 50 at extra charge) with 4 x feet
Eurolux beer tanks / fermentation tanks made of V2A with cone bottom, Test pressure: 1.5 bar, operating pressure: 0.99 bar with cooling jacket - capacity: 1500 litres New Material: V2A (AISI 304) 1.4301 Topsoil: with manhole with 6 screws with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 valve Cylinder tank: Cooling jacket 1000 mm wide with connection 1" AG input and 1 1/4" AG output Underbody: can be underrun with lifting scales and forklifts with residual outlet with forward-drawn outlet pipe, tank flush threaded nozzle DN 50, according to DIN 11851 with cone floor 120 Dimensions and weight: DxH: 1150 x 2400 mm Zyl. Height: 1500 mm Weight: 165 kg On request with: (extra charge - price on request): Fermentation sprout connection DN 50 Tasting tap DN 15 Fermentation s ...
Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...
Storage tank 1,700 liters Standing from V2A dimensions: Ges.Height: 3600 mm Cyl.Height: 3200 mm Diameter: 850 mm material: V2A – AISI 304, 1.4301 surface: Marbled outside cylinder: With threaded nozzles in the middle top DN100 With ladder hook With manhole 400 x 300 mm With threaded nozzle DN65 With residual drain DN80 subsoil: Also stands steel construction with 4 feet
Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres Available: 4 pieces UNI-SCHLI-FOR B. No. 18-086 A-D GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 2 crane eyelets 2 Threaded nozzles DN 50 1 elbow NW 40 cut off 1 nipples 1" 1 nipples 1/2" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos The containers additionally have 1 slanted seat flange NW 150 for agitator without agitator A container has a slight vacuum damage at the top
Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres UNI-SCHLI-FOR B. No. 18-087 A-F GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 3 crane eyelets 2 Threaded nozzles DN 50 1 nipples 3" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos Three of the containers have an additional 1 agitator flange DN 200 A container has a slight vacuum damage at the top
52,000 litres KZE tanks/storage tanks/ sterile tanks 4 pieces UNI-BAR B. No. 19-091 A-D GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap 1 slanted seat flange DN 350 for agitator - without agitator - Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo
52,000 litres KZE tank/ storage tank/ sterile tank UNI-BAR B. No. 19-094 GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo
Storage tanks/ stainless steel tanks without pressure Volume: 10.000 liter UNI-FIN-FOR Measurement and Weight: Diameter approx. 2.050 mm cyl. Height approx. 3.000 mm Total height with feet approx. 4.540 mm Year: 1992 Material: Stainless steel, 1.4301 Wall thicknesses: sub-floor 3 mm, cylinder + upper floor 2.5 mm Tank with conical bottom Upper body: 2 crane eyes 1 flange connection DN 65 1 ventilation nozzle DN 100 with bend Cylinder tank: 1 manhole 440 x 340 mm at the top: 1 socket ¾ " Lover bottom: 1 outlet spout with bend pulled forward NW 40 Otherwise see photos and drawing
Storage tank/ stainless steel tank pressureless, standing Content: 20,000 litres UNI-FIN-FOR B. No. 20-009 GL Dimensions and weight: Diameter approx. 2,600 mm Zyl. Height approx. 3,750 mm Total height with feet approx. 5,370 mm Built: 1992 Material: Stainless steel 1.4301 Wall thicknesses: underbody 3 mm, cylinder + top 2.5 mm Containers with cone bottoms Topsoil: 2 crane eyelets 1 flange nozzle DN 65 1 Vent ingesride DN 100 with bow Tank cylinder: 1 manhole 440 x 340 mm at the top: 1 3/4 Underbody: 1 outlet nozzle with bow pulled forward NW 65 in the outlet pipe there is still a outlet DN 40 otherwise according to photos
Storage tank 12,500 liters standing from V2A used - in very good condition Dimensions and weight: Ges. Height: 7100 mm Cyl. Height: 6080 mm Diameter: 1600 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central cylinder: with pipe pulled down with level indicator with manhole oval 330 x 430 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: With klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustment
Storage tank 5,000 liters standing from V2A used – in very good condition Dimensions and weight: Ges. Height: 6850 mm Cyl. Height: 6020 mm Diameter: 1080 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central cylinder: with pipe pulled down with tasting tap with manhole oval 300 x 400 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: with klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustable
Storage tank 10,000 liters standing from V2A used – in very good condition Dimensions and weight: Ges. Height: 7500 mm Diameter: 1450 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central with threaded nozzle DN50 cylinder: with pipe pulled down with tasting tap DN25 with manhole oval 300 x 400 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: with klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustable
EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...
12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65
Storage tanks outside marbled for wine, water, fruit juice, schnapps 12.200 liter UNI-NIED Measurement and Weight: Total Height: 3400 mm Length: 2400 mm Width: 1850 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With connection for zapf clape With connection for sample valve Lower bottom: With flat bottom With outlet pipe pulled forward NW50
Storage tanks, steel tanks without pressure 4,000l Tannk No. 100, 101, 103 UNI-OFF Tanks no. 100, 101, 103 UNI-OFF Measurement and Weight: Total Height: 3000 mm Cyl. Height: 2000 mm Diameter inside: 1490 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 3 feet height adjustable - with rest outlet DN 65
Storage tanks, steel tanks without pressure 5,000l Tanks no. 42, 43, 44, 45, 46, 47, 48, 49, 51 UNI-OFF Measurement and Weight: Total Height: 3500 mm Cyl. Height: 2550 mm Diameter inside: 1480 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 3 feet height adjustable - with rest outlet DN 65 (angle seat valve)
Storage tanks, steel tanks without pressure 6,000l Tannk No. 56, 57, 58, 59 UNI-OFF Dimensions and weight: Ges. Height: 4120 mm Zyl. Height: 3100 mm Inner diameter: 1480 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with clear drain DN 40 (inclined seat valve) - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 4 feet - with residual outlet DN 65 (inclined seat valve)
Storage tanks, steel tanks without pressure 8,000l Tannk No. 28, 29, 30, 31 UNI-OFF Dimensions and weight: Ges. Height: 3300 mm Zyl. Height: 2230 mm Inner diameter: 2000 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with clear drain DN 40 (inclined seat valve) - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 4 feet - with residual outlet DN 65 (inclined seat valve)
Storage tanks, steel tanks without pressure 10,000l Tanks no. 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 UNI-OFF Measurement and Weight: Total Height: 3900 mm Cyl. Height: 2900 mm Diameter inside: 1980 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)
Storage tanks, steel tanks without pressure 15,000l Tanks no. 52, 53, 54 UNI-OFF Measurement and Weight: Total Height: 4120 mm Cyl. Height: 2950 mm Diameter inside: 2380 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)
Storage tanks, steel tanks without pressure 20,000l Tannk Nos. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 UNI-OFF Dimensions and weight: Ges. Height: 3830 mm Zyl. Height: 2800 mm Inner diameter: 2780 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with flange - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 5 feet - with residual outlet DN 65 (inclined seat valve)
Storage tanks 19.160 liter outside marbled for wine, water, fruit juice, schnapps UNI-NIED Measurement and Weight: Total Height: 4600 mm Cyl. Height: 3600 mm Diameter: 1650 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With dished bottom With thread connection Cylinder tank: With 1 manhole With zapf clape With level indicator with bar and scale Lower bottom: With dished bottom With outlet pipe pulled forward with butterfly valve With 6 feet Can be combined with 10.600 liter storage tanks (cat-no. EUBA18-0047).
Storage tank, flat bottom tank 24.000 liter UNI-SAUL Measurement and Weight: Total Height: 4850 mm Cyl. Height: 4250 mm Diameter: 2600 mm Surface: outside IIID Material: V2A Upper body: - with conical bottom - with drawn downwards CIP cleaning line (connection DN 50, more see photos) - with 2 cran eyes Cylinder tank: - with forward pulled out manhole swiveling 440 x 340 mm - with holder - with clear outlet DN 50 with ball valve - with sample valve DN 15 - with level indicator with bar and scale Lower bottom: - with flat bottom - with forward pulled outlet with ball valve DN 50
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 5.750 Litre Measurement and Weight: Total Height: 4400 mm Tank Body Height: 3325 mm Diameter: 1600 mm Weight: 2110 kg Uni 3750 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure cooling jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Jacket and walls 9 mm. On cylindrical part of a cooling jacket as double jacket about 2.500 mm high. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upp ...
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank with red food safe munkadur coating with cooling jacket and with isolation With new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 8.000 Litre Measurement and Weight: Total Height: 4900 mm Tank Body Height: 3625 mm Diameter: 1900 mm Weight: 2100 kg Uni 4850 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10 +40 °C Year of construction: 2000 Lining: Akorrosit EL 15 p” On cylindrical part two cooling jacket, test pressure 2 bar, depressurizes, 5,8 m2 cooling surface Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 8 mm wall thickness. Container outside completely isolated with ...
Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...
Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...
MÖSCHLE Storage tanks outside marbled for wine, water, fruit juice, schnapps 11.500 liter UNI-NIED Measurement and Weight: Total Height: 3430 mm Length: 2350 mm Width: 1800 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection NW25 For level indicator with bar and scale With connection for zapf clape gr. 37 With connection DN 15 for sample valve Lower bottom: With flat bottom With outlet pipe connection NW50
Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 Liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe connection NW50 with butterfly valve
Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe pulled forward NW 50 with butterfly valve
Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ...
Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. approx. 4.700 liters used – in very good condition Measurement and Weight: Total Height 2650 mm Cyl. Height: 2000 mm Diameter: 1750 mm Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with hinged cover 50% with handle with thread connection DN 50 with 3 cran eyes Tank cylinder: with 2 x handle for mounting with thread connection DN 50 with butterfly valve DN 50 Lower bottom: with rest outlet with butterfly valve DN 50 drawn to the front with 3 calotte feet with variable height
KZE tanks outside marbled 5.610 liter UNI-NIED Measurement and Weight: Total Height: 3550 mm Cyl. Height: 2400 mm Diameter: 1400 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With dished bottom Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With pipe connection with fermentation fitting With clear outlet with butterfly valve DN 50 Lower bottom: With dished bottom With outlet pipe pulled forward with butterfly valve DN 50 With 4 adjustable feet
Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 2.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 2650 mm Cylinder height: 2000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra cha ...
Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 3.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra c ...
Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 5.100 liters NEW! Measurement und weight: Diameter: 1610 mm Total height: 3260 mm Cylinder height: 2490 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ...
Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 6.150 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra cha ...
Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on ext ...
GEA Tuchenhagen lye tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200
GEA Tuchenhagen acid tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200
Storage Tank/ Wine Tank in V2A Volume: 4.000 litre used - in very good condition Measurement and Weight: Total Height: 3650 mm Cyl. Height: 2700 mm Diameter: 1300 mm Weight: kg Material: V2A - AISI 304, 1.4301 Surface marbled outside Upper body: with torispherical bottoms 1 x thread connection DN 50 central Cylinder tank: 1 x ladder hook 1 x manhole 400 x 300 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve 1 x level indicator with bar and scale 1 x clap 1 x thread connection DN 50 side with blind cap Lower bottom: with torispherical bottoms 1 x forwards pulled rest outlet with butterfly valve DN 50 4 x calotte feet height adjustable