Model
(Manufacturer: MITSUBISHI)
Inv. Num: 5422 Type: ML3015eX PLUS Producer: Mitsubishi Generated: 2017 Parameters: Control system: MITSUBISHI M 700 Engine hours: 21480 h Spindle hours: 1480 h Laser power: 4.5 kW Maximum table load (even): 930 kg Feed length X-axis: 3100 mm Feed length Y-axis: 1565 mm Feed length Z-axis: 150 mm Machine length: 10210 mm Machine width: 3130 mm Machine Weight: 10700 kg
CNC controller: FP 80 Axes: X-axis travel mm: 300 Y-axis travel mm: 250 Z-axis travel mm: 250 Distance between table surface and electrode clamp surface (for standard electrode and table): 223 - 473 Max. Electrode weight kg: 25 Worktable: Table dimensions mm: 500x350 Maximum workpiece size (W × D × H)) mm: 740x470x130 Max. workpiece weight kg: 550 Working tank inner dimensions (W x D x H) mm: 770x500x230 Dielectric fluid reservoir capacity L: 165 Dielectric fluid filter method: paper filter Basic machine dimensions / weight: Length mm: 1.460 Width mm: 1.900 Height mm: 2.075 Weight kg: 2.000
Mitsubishi FA 10 Year of construction: 2005 Control : Mitsubishi 64 bit - CNC - PC control 5-controlled axes Auto. Wire threading : 0.20 - 0.36 mm Travel ( X/Y/Z) : 350 x 250 x 220 mm Travel (U/V) : +/- 32 mm Max. workpiece weight :500 kg Max. workpiece dimensions : 800 x 600 x 215 mm Interface Ethernet TCP-IPRS 232 C Auto. Wire Alignment Wire spools up to 10 kg
Description, subject to prior sale. Wire Eroding Machine Travels: X 500mm Y 350mm Z 300mm U± 32 V± 32 Taper angle (at workpiece height) 15° (100mm) Max. workpiece dimension (W x D x H) 1050 x 800 x 295mm Max. workpiece weight 800kg Table dimensions (W x D) 780 x 630mm Possible wire diameter 0.1-0.3mm Coils intake 10kg Automatic jet of water threading Wire shredder Max. feed (X/Y) 1300 mm/min Total dimension (W x D x H) 1883 x 2622 x 2150 Machine weight 3500kg Filtre unit: Tank capacity 708L Filtre fineness 3μm Filtre elements 2 Temperature control dielectric cooling unit Weight without filling 400kg Machine is in good working condition. Can be seen under power. Availability: short-term.
Description, subject to prior sale. Wire Eroding Machine Travels: X 500mm Y 350mm Z 300mm U± 32 V± 32 Taper angle (at workpiece height) 15° (100mm) Max. workpiece dimension (W x D x H) 1050 x 800 x 295mm Max. workpiece weight 800kg Table dimensions (W x D) 780 x 630mm Possible wire diameter 0.1-0.3 mm Coils intake 10kg Automatic jet of water threading Wire shredder Max. feed (X/Y) 1300mm/min Total dimension (W x D x H) 1883 x 2622 x 2150 Machine weight 3500kg Filtre unit: Tank capacity 708L Filter fineness 3μm Filter elements 2 Temperature control dielectric cooling unit Weight without filling 430kg Machine is in good working condition. Can be seen under power. Availability: short-term.
RECON Part Number: 32645-31020 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
RECON Part Number: 37755-05100 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
RECON Part Number: 37735-00030 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
RECON Part Number: 37719-22V20 Weight class M ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
RECON Part Number: 37705-10300 & Part Number: 37705-10400 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
RECON Part Number:32501-30300 Complete ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
RECON TN 37501-70051 but complete new valves, guides, seat rings ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Coolant pump ET No.: 37545-80011 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...
Mitsubishi MAF 240/180B CNC Floor Type HBM, New 1980 (Recontrolled in 1999) Condition: Very Good Type of CNC Control: Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter: 7.08"(180mm) Milling spindle diameter: 9.44"(240mm) Vertical Head Travel, Y-Axis: 169"(4300mm) Horizontal Column Travel, X-Axis: 1200" (30500mm) Headstock Travel, Z-1 Axis: 47.24"(1200mm) Spindle Travel, Z-2 Axis: 47.24" Total Axial Travel: 94.49"(2400mm) Rapid Traverse, X&Y Axes: 315 IPM Rapid traverse, Z, W and U Axes: 197 IPM Spindle Taper: CAT #50 Spindle Speeds: 6-1200 RPM - (3-Steps) Max. Spindle Thrust: 11,000 Lbs Constant Power Range: 79-1200 RPM Rotary Table Manufacture and Model: Mitsubishi DIT-A21X30 Rotary Table Size: 82" x 118" (2100x3000mm T-Slotted Rotary Table Max. Weight Capacity: 30 Tons Rotary Table Type: Insliding Rotary Inslide Travel: 59" (1500mm) Rotary Ta ...
TRUCK Mitsubishi Type Fuso Canter 4x4 YOC 2015 55tkm 3,000cc 175hp Loading area with superstructure and small crane
Electric cabinet with Mitsubishi FX 48MR DS Mitsubishi FX 2DA Mitsubishi FX 8EYR Mitsubishi MAC 50 Ss73i9l3r NORDAC COMPACT
M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi
Chromed cylinders, console, double sheet control, semi auto plate change, alcohol damping, technotrans recirculation and refrigeration, perfecting 2 / 2 and 4/0, Grafix powder spray, IR dryer, auto blanket ink roller washers, automatic impression cylinder washers Mitsubishi D 3000 - 4R (4/0-2/2) from 2003 A 4 colors offset printing press of size 72 x 102 cm Option; IPC (ink remote CTRL.), Mitsu. Alcohol damp. With technological TRANS recirculation & refrigeration and ink temperature control (techno TRANS BETA C), all auto. Washers, S - APC, car. Setting size and double sheet control PPC, Grafix IR dryer PERFECTOR 4/0 - 2/2, prepared for CIP connection, prepared for NON stop delivery, Grafix powder spray condition; VERY GOOD condition, ONLY 84 million impressions immediately available, can be Lakes RUNNING in our Factory Pictures at http://www.imprimerie-unal.com/p-d3000r/r1.html
Condition: as good as new (test run ex works) The turbochargers were subjected to a test run at the factory. When we arrived at our premises, they were dismantled and stored. Model: TD15-55B Part Number: 49127-01091 Suitable for: S12R S6R S6R2 There are 3 new and 2 used turbochargers
Condition: as good as new (test run ex works)/ traces of storage available The injectors underwent a test run from the factory. When we arrived, they were dismantled and stored. Model: TD15-55B Part Number: 49127-01091 Suitable for: S12R S6R S6R2 Suitable for: Mitsubishi S6R Mitsubishi S6R2 Mitsubishi S12R Mitsubishi S16R
Table size: 590 x 520 mm Max. workpiece size: 800 x 600 x 220 mm Max. workpiece weight: 500 kg X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U/V Axis Travel: 1.25" x 1.25" Filter tank capacity: 440 l. Control Mitsubishi Approx. delivery weight: 2000 kg Approx. shipping dimensions in mm: 1550 L x 1800 W x 1930 H
Robot Mini robots, Laboratory robots Manufacturer: Mitsubishi Type: MELFA RV-3SB-S312 Built: 2006 Control Teach panel (input display) All cables Operating instructions as PDF file Applications Assembly of individual parts Testing and testing tasks Material processing Loading and unloading operations Palletizing Application of sealants Colour painting Fine and brazing Deburring All information without guarantee
MITSUBISHI Model S16R-PTAH Generator Set, Power Generator Diesel 2015/kVA Standby, 2215 kVA Prime 0 hours of operation
Dear's Sale, used engine MITSUBISHI UEC 45 piston, main bearing, conrod bearing, etc. Brgds Hakan KUSCU +905323642509
We have many used Mitsubishi Injection pumps for sell. Condition of the units is seen on the pictures. We sell this units only to dealers Companys ore for export without warranty. All oure information is based on best knowing we can not ensure that al information given ar right and complete. We try oure best to provide you the best information of oure gears. We only sell to resellers or companies and export to the exclusion of warranty. Brand: Mitsubishi Heavy Industries Model: PS6-HL-50 Sparepart No.: 48270-00004
Diesel Generator Mitsubishi 1270 kW / 50 Hz Containerized – never used Containerized diesel generators with Mitsubishi 1500 rpm diesel engine type S16R-PTA-S installed in two containers: the first 20 feet container has generating set with controls and auxiliaries, second 20 feet container has engine cooling radiators, which will be installed on top of generator container for operation. Units are made in year 2017 and they have never been in operation – from a cancelled project. Units have all necessary auxiliaries for automated operation, control system is Mitsubishi MGS 7310. Technical characteristics Manufacturer: Mitsubishi Heavy Industries Manufacturing year: 2017 Product type: MGS 1500C Number of units: 8 pcs Engine type: Mitsubishi S16R-PTA-S Alternator: Stamford 1846 kVA / 380 V / 50 Hz Continuous output: 1270 kWe Prime output: 1480 kWe Fuel: Light dies ...
Mitsubishi engine L3E, 3-cyl. water cooled, 952 CC displacement, engine without a flywheel, connecting rod bearing defective.
+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first devices is April / May 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: 9.900,- € gross price: €11,781 - - - - - Mitsubishi emergency generator set 22 kVA + + NEW - Year of construction 2023 + + --> Stage 5 emission standard for mobile applications - - - - - Engine: - Mitsubishi (Japan) - Model: S4L2 - 4 cylinders -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 17.2 / 18.9 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitori ...
BRAND: MITSUBISHI YEAR: 2006 MODEL: FA20SM APPLICATION TYPE: EDM LOCATION: ROMANIA MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2013 MM MEASUREMENTS DEPTH: 2632 MM MEASUREMENTS HEIGHT: 2100 MM MACHINE WEIGHT: 3500 KG MOVEMENT X-AXIS MOVEMENT: 500 MM Y-AXIS MOVEMENT: 350 MM Z-AXIS MOVEMENT: 300 MM WORKPIECE WORKPIECE WEIGHT: 1500 KG TABLE OUTER LENGTH: 780 MM OUTER WIDTH: 630 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WIRE DIAMETER OF 0. 1 MM TO 0,3 MM - MAX WIRE FEED SPEED: 23 M/MIN
FOR SALE MITSUBISHI S12 HPTA COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE MITSUBISHI S12 HPTA AT OUR STOCK PLS FIND ENGINE SPEC ON BELOW TYPE S12 HPTA NO. 30069 YOB 1999 POWER 890KW REV 1500 RPM WE CAN DISMANTLE ENGINE AND WOULD BE OFFER ENGINE PARTS (CYLINDER HEADS PISTONS LINERS CRANK SHAFT ENGINE BLOCK TURBO CHARGERS ETC) EX STOCK IZMIR TURKEY READY TO SHIPMENT. IF YOU'VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer a Mitsubishi Industry 6-axis articulated arm robot. RV Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV series offers a highly dynamic 6-axis articulated robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.
MITSUBISHI solar panel prodcution machines year `2011 x 65 units
BRAND: MITSUBISHI YEAR: 1997 MODEL: FX 20 APPLICATION TYPE: EDM LOCATION: SLOVENIA MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1100 MM MEASUREMENTS DEPTH: 850 MM MEASUREMENTS HEIGHT: 360 MM MACHINE WEIGHT: 2550 KG MOVEMENT X-AXIS MOVEMENT: 500 MM Y-AXIS MOVEMENT: 350 MM Z-AXIS MOVEMENT: 300 MM U-AXIS MOVEMENT: 15° MM V-AXIS MOVEMENT: 15° MM MEDIA MAIN ELECTRONIC CONNECTION: 200-220V / 50 HZ
BRAND: MITSUBISHI YEAR: 2017 MODEL: ML3015EX F60 APPLICATION TYPE: LASER CUTTING LOCATION: THAILAND MACHINE TYPE: LASER CUTTING MACHINES (CO2) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: MITSUBISHI MAIN DRIVE LASERPOWER: 6,0 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MACHINE TABLE WITH CNC CONTROL AND DISPLAY 1 UNIT - PALLET CHANGE 5X10 FOOT 1 UNIT - DUST COLLECTOR 1 UNIT - LASER COOLING 1 UNIT JAPANESE BRAND COMES WITH MITSUBISHI - TRASFOMER FROM 380V TO MACHINE 1 UNIT
Marine Generator Engine Standard crankshaft good condition
Travel X 500 mm / Y 350 MM / Z 300 mm Water bath machine Automatic wire threading incl. radiator
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
control Mitsubishi CNC travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg table size 780x630 mm
Spindle size: dia 200 / ISO 60 X travel: 18.000 mm Y travel: 5000 mm Z travel: 1000 mm W travel: 1.300 mm Spindle speed: 700 RPM Rotary table: - Surface: 4500 x 4500 mm - Travel: 2000 mm
Make:MITSUBISHI Type:TD13M-430RC Serial Number:A25665 Part Number:7689069 MFG Number:49182-05300
BRAND: MITSUBISHI YEAR: 1996 MODEL: EX 8 APPLICATION TYPE: EDM LOCATION: GERMANY MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: MITSUBISHI MODEL: FP35E MOVEMENT X-AXIS MOVEMENT: 300 MM Y-AXIS MOVEMENT: 250 MM Z-AXIS MOVEMENT: 250 MM TABLE OUTER LENGTH: 500 MM OUTER WIDTH: 350 MM TABLE LOAD: 550 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WORKING TANK DIMENSIONS: 660 X 450 X 250 MM - MAX ELECTRODE WEIGHT: 25 KG
Reference number 20136 Brand MITSUBISHI Model S12R- 2 MPTA SN 11955 Power 1180 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - VIDEO AVAILABLE DIMENSIONS LxWxH (cm) 2,416 x 1585 x 1807 Weight (kg) 5,470 KG
Reference number 20137 Brand MITSUBISHI Model S12R T2 MPTK (FW) SN 13885 Power 1260 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - WITH CLASS DIMENSIONS LxWxH (cm) 2,556 x 1,622 x 1,728 Weight (kg) 5,500 KG