Model
(Manufacturer: MITSUBISHI)
Wire erosion for sale X : 500 mm Y : 350 mm Z : 300 mm
Installed in August 2014 Regularly maintained Usually very small pieces are cut https://www.mitsubishi-edm.de/en/mvs-series-specifications.html
Manufacturer Mitsubishi Model MV1200S Year 2014 Imported to Germany in October 2022 Fully maintained
Year of Built 2012 Installation year 2012 Workpiece size 3050 x 1525 mm / maximum weight 950 kg Generator 4.5 kw Automatic pallet change LOAD MASTER loader Cutting thickness: - mild steel: 26 mm (oxygen) - Stainless steel: 12 mm (nitrogen) - 10mm aluminum nitrogen (air) Axle travel: X-3100mm / Y-1565mm / Z-150mm Fast travel speed: X and Y - 100m / min Fast travel speed: Z - 65m / min Max feed 50m / min 7.5 inch (2x) 7.5 inch auto focus head Automatic edge / plate detection (automatic rotation) Mitsubishi 4500 Watt cross flow resonator (peak power of 5000W pulse) CO2 laser CO2 / CO / N2 / He = 8/4/60/28 Laser gas consumption 3 liters / hour Double cutting function allows surface removal and cutting on inferior materials and protected sheet metal Edge punching function Control of slag reduction in corners Retraction of the head by normal, cross and arc method 90% ene ...
Technical parameters of the MITSUBISHI ML3015EX S2-45CF-R laser â laser power: 4.5 kW â laser type: CO2 â man-hours: approx. 17,000 h â control: simultaneous 3 axes (X, Y, Z), sensing the height of the Z axis is also possible â maximum dimensions of the element to be processed: 3050 x 1525 mm â weight of the loaded pallet: 950 kg â workpiece support section height: 880 mm â pallet change time: approx. 25 seconds â number of pallets: 2 â X axis feed: 3100 mm â Y axis feed: 1550 mm â Z axis feed: 150 mm â rapid feed (X, Y axis), speed: maximum 100 m / min. (48 in manual mode) â maximum feed speed: 50 m / min. â positioning accuracy: 0.05 / 500 mm (X / Y axis), 0.1 / 100 mm (Z axis) â repeatability: + -0.01 mm (X, Y axis) â machine weight: 10700 kg MITSUBISHI Laser Resonator â reso ...
650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic
Description: max. workpiece dimensions 1050 x ,800 x 295 mm max. workpiece weight 1500 kg Electrode diameter ,0.1 to 0.3 mm max. wire feed 23 m/min x-motion: 600 mm, y-motion: 400 mm, z-motion: 310 mm, table surface area l x w : 840x640 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 2,700 x 3,000 x 2,200 mm
Description: Mitsubishi MTE 2000 D General: Brand and Model: Mitsubishi MTE 2000 D Type: Tractor Drivetrain: 4-wheel drive Transmission: 4x4 gears Usage Hours: 400 hours Power: 20 hp Functions: Starts, drives, lifts, lowers – performs all functions Hydraulics: Type: 3-point hitch PTO Connection: 540/1000 Free loading on truck means that the seller will drive it on a truck with loading ramps Approx. Onsite Dimension. (l x w x h): 2,360 x 1,090 x 1,450 mm, weight approx.: 800 kg
Description: Load capacity 2000 kg, lifting height approx. 6300 mm, serial number RFB 34 A, including loader Approx. Onsite Dimension. (l x w x h): 2,750 x 1,250 x 3,250 mm, weight approx.: 4,800 kg
Description: Rated load 1600 kg, lifting height approx. 6300 mm, without charger Approx. Onsite Dimension. (l x w x h): 2,750 x 1,250 x 3,250 mm, weight approx.: 4,800 kg
Description: Serial Number:55DR1663 Max. Workpiece dimensions: 800x600x215 mm Max. Workpiece weight: 500 kg Table dimensions: 640 x 540 mm Travels: X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Table rapid traverse rate: 1300 mm/min Wire diameter: 0,1 to 0,3 mm Max. Wire feed speed: 23 m/min Wire tension: 0,5 to 25 n Taper: OPTOLinear T/C device Taper angle: 15º (with 200mm plate thickness) Working Hours 24073 Dielectric Fluid Reservoir: Working tank volume: 550 litres Filtration flow rate: 50 l/min Water purifier: 10 litres Other features: Superfinishing Rugosity less than Ra 0.2 weight approx.: 2,980 kg, Approx. Onsite Dimension. (l x w x h): 1,910 x 2,702 x 2,015 mm
Description: Nominal load 1000 kg, lifting height 2500 mm, load center 400 to 600 mm, operating hours 264, including loading device, Attention: Loading only at the end, buyer agrees that the forklift is still used for loading purposes Approx. Onsite Dimension. (l x w x h): 1,700 x 1,000 x 2,000 mm, weight approx.: 900 kg
Refrigeration Compressor, Refrigeration Machine, Refrigeration Compressor, Refrigeration Unit, Refrigeration Compressor, Compressor, Motor Compressor, Separation Hood Compressor, Separation Hood Compressor, Refrigeration Unit, Hermetic Compressor -Manufacturer: Mitsubishi, compressor Hermetic Compressor type NH465YJE -Power kW -Voltage: 380-415/400-460V/50/60Hz -Technical data: see photo of nameplate -Dimensions: 310/200/H410 mm -Weight: 27 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 2.2 kW -Dimensions: L300/W220/T180 mm -Number: 1x converter available -Price: per piece -Weight: 8 kg
Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Mitsubishi, frequency converter FR-A044-2.2K-ER -Power: 2.2 kW -Input: 380-460 V 50/60 Hz -Output: 6.0 A -Dimensions: 215/200/H185 mm -Weight: 4.8 kg
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, permanent magnet motor -Mitsubishi: DC Servo Motor HD 81-12S -Tachometer generator: Tamagawa TT-A-II -with: brake -Construction: B5 -Dimensions: 415/205/H200 mm -Weight: 20 kg
Starter Mitsubishi -Voltage 24 V -Type: M2T65275 -Teeth: 11 -Weight: 7 kg
Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Construction: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg
This 3-Axis MITSUBISHI ML3015eX-F40 was manufactured in 2016. A fiber laser cutting machine equipped with a Mitsubishi M700 control, 4kW laser power, and capable of handling workpiece dimensions up to 3050 x 1525 mm. Features include a sheet metal loading crane and an offline software license. In very good condition and available for testing. Reach out for further details regarding this laser cutting machine.
This MITSUBISHI FA20SM Erosion machine was manufactured in the year 2006. The machine has a wire diameter of 0.1 to 0.3 mm.
This Mitsubishi Electric FA20-VS Erosion Machine from 2006 is a compact machine, operated through a Mitsubishi 64-BIT-CNC Control unit. Aside from its solid condition, the equipment stands out for its 1500-kilogram workpiece weight capacity.
This MITSUBISHI FX20K Wire EDM machine was manufactured in 1999 in Japan. The machine has a table of 1500 x 800mm and a max. workpiece weight of 800kg.