used OPTIMAL for sale

feed pressure: 10,0 bar intake capacity: 727 L/min Effective free air delivery: 582 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 4,0 kW weight of the machine ca.: 91,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directi ...

feed pressure: 10,0 bar intake capacity: 345 L/min Effective free air delivery: 228 L/min Receiver capacity: 50,0 Ltr. motor: 230 V power capacity: 2,2 kW weight of the machine ca.: 51,0 kg. dimensions of the machine ca.: 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place  ...

weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

welding power: 30 - 290 A (stufenlos) welding power: ED 60% 175 A Wire thickness: 0,6 - 1,2 Stahl mm Wire thickness: 1,0 - 1,2 ALU mm voltage: 400 V weight: 67 kg LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm²  ...

width of the strips: 75,0 mm band length: 2000 mm band speed: 29,0 / 14,5 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 72,0 kg range L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operators body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just ...

width of the strips: 150 mm band length: 2000 mm band speed: 29,0 / 14,5 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 90,0 kg range L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operators body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is jus ...

sheet width: 3100 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 mm cutting angle: 1.8 ° no. of strokes: 14 Hub/min down holder: 15 Stück work height max.: 805 mm Column width: 3515 mm Control: CYBTOUCH 8 oil volume: 250 l voltage: 400 V engine output: 22.0 kW weight: 9000 kg range L-W-H: 4110 x 2200 x 2100 mm well maintained condition - built in 2019 () New price ~ 55.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit CYBELEC CYBTOUCH 8 (touchscreen) Anti-reflective, robust color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back gauge Cutting length control via adjustable stroke length Cutting counter Automa ...

sheet width: 1020 mm plate thickness: 2,5 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 2 ...

sheet width: 3200 mm plate thickness: 0.5 - 6.0 mm cutting angle: 1° 30 ° no. of strokes: 14 Hub/min back stop - adjustable: max. 1000 mm down holder: 13 Stück work height max.: 800 mm Control: EASY-VIEW oil volume: 270 l voltage: 400 V engine output: 7.5 kW weight: 6100 kg range L-W-H: 4010 x 1610 x 1620 mm from a maintenance workshop - good condition () was only used sporadically according to the previous seller New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH EASY-VIEW touch CNC positioning control Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of ...

thread dia.: M5 - M24 turning speeds: 70 - 200 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous met ...

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2,0 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° work height max.: 900 mm total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing  ...

saw blade diameter: 350 x 32 mm capacity 45 degrees: round: 110 mm capacity 60 degrees: round: 90,0 mm capacity 90 degrees: square: 95,0 mm capacity 45 degrees: square: 95,0 mm capacity 60 degrees: square: 90,0 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: flat: 125 x 95 mm capacity 90 degrees: round: 115 mm capacity 60 degrees: flat: 90 x 90 mm 0: 15 / 30 / 45 / 90 U/min weight of the machine ca.: 375 kg Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The large turntable with internal table clamp & Precision stops at 0/45/60 ° ensure quic ...

weight max. in kg: max. 1000 kg turning speeds: 0,18 - 0,58 U/min height: 976 - 1436 mm inclination: 0 - 115 ° table diameter: 895 mm voltage: 380 V total power requirement: 2,0 kW weight: 685 kg range L-W-H: 2414 x 920 x 1436 mm he AK BEND SRH hydraulic weld positioner is great for welding, assembly and maintenance work. The positioning is done via a hydraulic turning and tilting function. Description : - hydraulic turning and tilting function - Fast handling of workpieces - Highest productivity through optimal working position - Lifting, tilting and turning of workpieces in one setting - Low non-productive times by turning components - Highest work performance through pleasant working - Back-friendly work for the user Furnishing : - Stepless speed adjustment - free-moving footswitch - Handheld remote control with 5 meter cable - freely movable control panel with digital speed display  ...

weight: 540 kg diameter: 1200 mm height: 1100 mm 0: 350 l total power requirement: 1,9 kW voltage: 350/50 V length in total: 1820 mm - with integrated manual separation ramp - control panel - Dosing pump for liquids - Capacity 382 liters - A soundproofing cover is also offered at extra cost! Sound insulation cover for VKUE 200 + The cover is controlled by a pneumatic piston + While the machine is running, the soundproof cover ensures for significant noise reduction. + It also prevents splashing of water or abrasives + It reduces noise emissions to less than 80 decibels. + The connection requires 6 bar General description: Our vibratory finishing system is suitable for: roughening, removing paint, decoating, deburring, derusting, descaling, de-oiling/degreasing, grinding as well as polishing and smoothing. The can also be used for non-metallic materials machine are used. Depending on the  ...

table length: 2400 mm table width: 1200 mm table height: 200 mm weight: 920 kg Manufacturer: GERD WOLFF Website: www.gerdwolff.com Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technol ...

charge load: / : / weight: 720 kg diameter: 1360 mm height: 1200 mm 0: 520 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in th ...

charge load: / : / weight: 340 kg diameter: 960 mm height: 980 mm 0: 219 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in the  ...

charge load: / : / weight: 1350 kg diameter: 1760 mm height: 1240 mm 0: 1210 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in  ...

Pressure: 0 t Sheet length: 150 mm Sheet width: 200 mm Positions ATC: 0   Minimum tool diameter 2 mm Maximum tool diameter 160 mm Maximum grinding depth 0.99/cycle Grinding rate 0.03 to 0.06 mm/Min Power 1.5 kW FAST, EASY AUTOMATIC TOOL GRINDING All punch press operators know how important tool maintenance is to part quality and tool life. Automatic tool can give a superior quality and process stability, considerably reducing maintenance times. TOGU-EU automatic tool sharpener has been specially designed for high quality sharpening of sheet metal tools. With fast and reliable sharpening of all standard tools, it allows their optimal repair and guarantees to always produce high quality parts. Unlike traditional grinding machines, the TOGU-EU range can minimise the amount of material removed during grinding, preventing the tool from overheating and extending its life time.  ...

Other Info: Micro Blasting MAKE   IEPCO Peenmatic TYPE     Peenmatic 750 S YEAR    2000 DIMENSIONS Length    740 mm Width      520 mm Height      500 mm Make        : Iepco Swiss Type        : Peenmatic 770 S YOP         : 2006 No.         : 770 - 289   Working internal space   Length        : 740 Width         : 520 Height        : 500 Optimal product 500 x 400 x 250 mm   Dimensions outside   Length        : 870 Width       ...

Other Info: Micro Blasting MAKE   IEPCO Swiss TYPE     Peenmatic 770 S YEAR    2006 DIMENSIONS Length      740 mm Width        520 mm Make        : Iepco Swiss Type        : Peenmatic 770 S YOP         : 2006 No.         : 770 - 289   Working internal space   Length        : 740 Width         : 520 Height        : 500 Optimal product 500 x 400 x 250 mm   Dimensions outside   Length        : 870 Width         : 936 Heig ...

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

Halbautomatische Kappsäge Fabr.: Salvador Typ: SUPERPUSH 150 Neumaschine Superpush 150 ist das Einstiegsmodel für den Holzzuschnitt mit Optimierungsfunktion. Die Maschine wurde als direkte technologische Weiterentwicklung der herkömmlichen Sägemethoden entwickelt und kann sowohl die Produktivität als auch die Holzausbeute steigern. ÄUSSERST ROBUST Die Struktur besteht aus dickem, verstärktem und lackiertem Stahl. Horizontale Auflagefläche mit beweglichem Schutz, damit das Werkstück leichter eingelegt werden kann. Schlitten mit Messanschlag und Schubfunktion. Lineareinheit mit Zahnriemen mit Stahleinlagen und Gleitschiene mit Linearlagern. Horizontale, durchgehende Werkstückablage mit einer Breite von 300 mm. TECHNOLOGISCH INNOVATIV Elektronisches System bestehend aus einem Touchscreen mit integrierter CNC. Software für Linux-Umgebung mit kundenspezifische ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

This KNOLL KF 400/3400, manufactured in 2019, is a versatile system tailored for efficient plastics processing. It includes a scraper belt conveyor and a compact filter system, ensuring effective management of emulsions and particulates. The setup features a robust clean tank with a 3400l capacity and multiple pumps, including a centrifugal and screw pump, to maintain optimal flow and pressure. Additionally, it is equipped with plate heat exchangers to manage thermal loads effectively. Ideal for operations requiring precise temperature and flow control. Contact us for further details regarding this system.

This 5-axis HERMLE C22 Machining center was manufactured in 2017. It includes an integrated handling system, IH30, designed to enhance automation and efficiency in production. The compact yet robust configuration of this machine allows for versatile milling applications with precision and reliability. The advanced control system ensures optimal performance and supports complex milling operations demanding high accuracy. The HERMLE C22 machine we have for sale is expertly crafted to meet stringent manufacturing requirements. Contact us for further details regarding this machining center.

This 3-Axis COORD 3 ARES NT 1075 MOT measuring machine was manufactured in 2016. It features advanced capabilities such as a 3D scanner by Renschaw Nikon for reverse engineering, a laser scanning sensor, and dynamic wireless thermal compensation for optimal accuracy in diverse conditions. The machine is also equipped with a pneumatic vibration isolation system and modular part fixing kits, enhancing its versatility and performance in precision measurements. Buy this COORD 3 ARES NT 1075 MOT for detailed and accurate measuring. For more information about this measuring machine, please reach out to us.

This 6-Axis lathe was manufactured in 2004 and features a HAAS SL-30TCE model. With a robust 12-position tool turret and 254mm chuck, it offers precision in turning with a maximum diameter of 432mm and length of 864mm. Boasting rapid traverse on X and Z axes at 18m/min, it ensures efficient operations. Equipped with brushless motors and a compact design, its an optimal choice for machining tasks. Interested in optimizing your workshop? Inquire for further details on this HAAS SL-30TCE lathe.

With EdmoLift leveling posts, items can effortlessly be raised to a working height of 1,100 mm. The level lift offers leg and foot clearance on three sides, ensuring smooth operation thanks to its excellent accessibility. In addition, with our dolly accessory, the leveling lift becomes mobile and thus offers two extremely practical advantages: Firstly, it can be easily moved during cleaning and cleaning. Second, it can serve multiple jobs, making your investment even more worthwhile. Pallets or containers are placed with the hand pallet truck or forklift directly on the leveling lift. The TSL models have a minimum height of 70 mm, with the TSE models, this is only 10 mm. Type TSLN leveling feet are equipped with a stepless inclination function and can be tilted by 40 ° to the left or to the right. This is a considerable reduction in workload, as it opens up an ergonomic window that help ...

Used Kosme Filling Monoblock Completely Refurbished in 2016 Introduction to the Kosme Monoblock The Kosme filler a filling monoblock with a 24 24 6 configuration for carbonated and still water stands out for its reliability and high performance capabilities Additionally this machine refurbished completely in 2016 and unused since then ensures optimal working condition Performance and Operational Capacity of the Used filling monoblock Kosme completely refurbished in 2016 This monoblock s operational capacity is remarkable it produces 9000 pieces per hour for 330 ml bottles demonstrating its versatility in handling various bottle sizes ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height Technical Features of the Monoblock Among its key features the presence of an aluminum cap and an effective rinsing system are noteworthy Furthermore the monoblock comes equipped wi ...

Used Bottling Line for ESL MILK up to 2500 bph We present a used bottling line engineered for maximum efficiency and reliability in packaging ESL milk Furthermore this line is optimized to ensure continuous and high quality production with a nominal capacity of 2500 bottles per hour bph Nominal Capacity and Configuration of the Bottling Line for ESL Milk The nominal capacity of 2500 bph arises from a precise arrangement of the main components Firstly the line includes 12 filling heads and 1 capping head ensuring a smooth and uniform flow during the bottling process Moreover it handles round PET bottles with a standard format of 1000 ml Product and Packaging Specifications This line is designed for round PET bottles with a standard format of 1000 ml It accommodates both pasteurized and ESL pasteurized milk ensuring maximum versatility in production Power Feeding and Distribution Features  ...

Used Bottling Line Tehnometal up to 6500 bph The bottling machinery known as Used Bottling Line Tehnometal up to 6500 bph provides a highly efficient solution for the bottling industry This plant comprising high quality components and featuring advanced technical specifications ensures optimal performance and long operational life Blower KRUPP Corpoplast Blomax 6 of the Used Bottling Line Tehnometal The Blower KRUPP Corpoplast Blomax 6 produced in Germany in 1999 underwent general repairs in 2016 after purchase Consequently this component has a capacity of 6 500 bottles per hour bph for 1 5 liter bottles and 7 000 bph for 0 5 liter bottles with 6 cavities The blower includes a cooler but lacks a compressor Furthermore the available molds allow for the production of 0 5 1 5 and 2 0 liter bottles An air conveyor 40 meters long connects the blower to the monobloc Monobloc TEHNOMETAL The mon ...

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10 800 cph represents indeed a reliable and efficient solution for industrial bottling operations Equipped with specialized and high quality equipment this line is meticulously designed to maximize productivity and ensure in fact optimal results CFT Empty Can Twist Rinser Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans Moreover with its dual can rinser system and spare parts sets for 0 35L and 0 47L aluminum cans it ensures flexible operation tailored to specific production needs Additionally the rinse process guarantees pristine can surfaces vital for maintaining product integrity CFT 20 Valve Can Filler Seamer of the CFT Canning Line The 2013 model RS20 CFT 20 valve can filler with seamer ensures precise and rapid filling o ...

Used Tetra Pak TBA 19 200ML Slim 30V year 2007 The bottling line featuring the 2007 Tetra Pak TBA 19 200ML Slim 30V is an advanced system tailored specifically for the juice and dairy packaging industry Main Machinery of the Tetra Pak TBA 19 Line In fact at the core of the bottling line lies the Tetra Pak TBA 19 machine Engineered indeed to handle Brik containers with precision with a volume of 0 20 L it operates at a capacity of 7500 bottles per hour BPH ensuring efficient and continuous production Aseptic Filling System Positively one of the distinguishing features of this line is its aseptic filling system This ensures surely that the product is bottled under optimal hygienic conditions thereby maintaining freshness and quality Accessories and Additional Components In addition to the main machinery the bottling line Tetra Pak TBA 19 is equipped with various accessories and additional  ...

Used WrapAround Packer BAUMER year 2013 Introduction Within the intricate landscape of bottling technology the Used WrapAround Packer BAUMER 2013 emerges as a beacon of excellence Crafted by the renowned manufacturer Baumer this machine embodies reliability and adaptability tailored to meet the multifaceted demands of modern production lines Unrivaled Performance At the heart of its prowess lies an impressive speed of 1500 boxes per hour a testament to its unwavering commitment to efficiency This speed not only ensures heightened productivity but also maintains the integrity of packaging with meticulous precision Accompanied by a repertoire of 10 available formats the machine seamlessly transitions between diverse container types offering unparalleled operational flexibility Prioritizing Safety and Reliability In the dynamic realm of industrial machinery safety remains paramount Thus the ...

Output: up to max. 330 containers / minute (plastic bottles with delicatessen sauces 200 g), single-beam X-ray inspection device (side view), Tube replacement in Sept 2022 - 1 additional new X-ray tube included, max. bandwidth 156 mm, Scanning height: 425 mm, Power max. 600 W, Voltage: continuously adjustable up to 60 kV,, Current: up to 10 mA, continuously adjustable, Designed as a curtain-free X-ray scanner, Scanner tape: 2600 x 190.5 Intralox, Total length of the system: approx. 2706, Working height: 950 - 1050 mm, Working direction: left - right, Elimination: short-stroke pusher, Belt conveyor belt with IMOT drive unit (servo motor) for, Overtracking., Tool-free quick-change device for replacing the, belt., Continuous adjustment of the transport speed via the, Control of the machine. Small transfer radii for optimal, Product transfer situation on the incoming and outgoing conveyor.,  ...

Automatic tray sealing machine, make Sealpack, type 5V/G, year 2015, Plant for sealing sealable trays with a on the tray, coordinated top film, Set up on an octagonal A-PET tray, for 125 and 175 g content (134 x 100 x 23/40mm) with an oval base and octagonal lid., without filler and without labeller, • Can be operated from both sides, standard operating side here from the right!, • including vacuum and gas equipment, • including vacuum sensor, real value display in mbar, • including MAPpIus gas supply system (first-class from 200 mbar vacuum, Gas values in the pack, product dependent), Machine made of corrosion-resistant materials such as VA and plastic,, very stable column construction, integrated VA control cabinet splash water, protected, swiveling control panel All-round operability, Menu navigation can be stored over several programs, All switching, driving and sealing funct ...

The Prima Industrie Platino 3 kW laser, manufactured in 2006, is a high performance industrial laser ideal for precise cutting of metal materials. It comes fully equipped with essential accessories for efficient and high-quality operation. Technical Specifications - Model: Prima Industrie Platinum - Laser Power: 3 kW - Year of Manufacture: 2006 - Useful cutting dimensions: 3000 x 1500 mm - Interchangeable table Accessories Included - Sideros scraper (Prima Industrie) - Sideros Vacuum Cleaner (Prima Industrie) - HPC Plusair Compressor - HPC Dryer - Air cylinder Cutting Capabilities - Carbon steel: thickness between 0,6 mm - 22 mm - Stainless steel: thickness between 1 mm - 8 mm - Aluminium: thickness between 1 mm - 4 mm Gases Used - Cutting gases: Nitrogen, Oxygen - Forming gases: CO2, Nitrogen, Helium Advantages and Benefits - High performance: Ac ...

-Exhibition machine- Machining length 3,200 mm (without additional support of the workpiece) Vertical machining center for drilling, milling and grooves. Highest flexibility and universal range of application with the smallest space requirement. Modern industrial design built from quality components with an optimal field of view of machining and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides Ball screws in X, Y and Z direction for precise positioning and for perfectly fitting workpieces. Workpiece-friendly clamping system by means of vacuum suction cup (2 x 80/80 and 2 x 80/40 mm) with automatic suction cup positioning. Extremely short set-up times. Workpiece fixation on the back allows machining of the entire circumference including horizontal drilling without additional reclamping (up to workpiece lengths of 1,500 mm). This guara ...

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...

turning diameter over bed:650 mm turning diameter over slide:450 mm turning length:1435 mm bed width:350 mm spindle bore:155 mm spindle speed:50-800 (3 stufig, stufenlos) U/min spindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mm tailstock quill diameter:95 mm tailstock quill taper MT:5 MK tool post size:25x25 mm power requirement:7,5 kW weight of the machine ca.:2400 kg dimensions:3020x1140x1770 mm DRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 Stück Factory new center lathe with 2-axis digital display and variable speed and many more. CHARACTERISTICS: Powerful, flexible and productive With ...

:TH-1000 | TH-1250 | TH-1600 grinding diameter:1000 | 1250 | 1600 mm grinding length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mm swing diameter:1000 | 1250 | 1600 mm workpiece weight max.:20 t zwischen Spitzen max. workpiece weight:25 t mit Lünetten | 25-60 t mit Lünetten | 25-60 t mit Lünetten grinding diameter min/max:75-1000 | 150-1250 | 250-1600 mm dimensions of grinding wheel:915x100x304.8 (Option1060x150x508) mm traverse- head stock:quer: 550 | quer: 780 | quer: 910 mm feeding of spindle:0.001 mm cross feed autom.:3000 mm/min grinding spindle speed:500~1500 U/min traverse- head stock:längs: Spitzenweite + 200mm mm grinding spindle slide rapid travel:25~6000 mm/min tailstock quill stroke:170 mm tailstock movement:1800 mm/min rotation speed of workhead :5~50 1/min drive capacity - spindle motor:SIEMENS:40-60 PS x 4 Stück power capacity - workpiece power:SIEMENS:75-100 PS ...